Date: Tue, 6 Mar 2012 16:37:42 +0100 From: Monthadar Al Jaberi <monthadar@gmail.com> To: freebsd-mips@freebsd.org, Adrian Chadd <adrian.chadd@gmail.com> Subject: arge0: initialization failed: no memory for rx buffers Message-ID: <CA%2BsBSoKsHivc=fe2G=0OOwbdr6r2VnQd-zZOBxKKXV2gk_PAJw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi everyone,
I am cant seem to boot my RouterStation Pro from NFS. I get this error
from arge0 after a couple of DHCP/BOOTP timeout for server
255.255.255.255
arge0: initialization failed: no memory for rx buffers
It seems no packets are sent out? I cant seem to see any on tcpdump.
I am attaching kernel config and boot dump.
Thanks!
include "AR71XX_BASE"
ident "RSPRO_NFS"
hints "RSPRO.hints"
# RTC - requires hackery in the spibus code to work
device pcf2123_rtc
# New Network Filesystem Client
options NFSCL
options NFSLOCKD #Network Lock Manager
# GEOM modules
device geom_redboot # to get access to the SPI flash partitions
device geom_uzip # compressed in-memory filesystem support
options GEOM_UZIP
# For DOS
options GEOM_PART_BSD
options GEOM_PART_MBR
options MSDOSFS
# For GPT
options GEOM_LABEL
options GEOM_PART_GPT
options NFS_ROOT
options BOOTP
options BOOTP_NFSROOT
options BOOTP_NFSV3
options BOOTP_WIRED_TO=3Darge0
options BOOTP_COMPAT
options ROOTDEVNAME=3D\"nfs:192.168.1.184:/usr/root\"
boot dump:
Now booting linux kernel:
Base address 0x80050000 Entry 0x80050100
memsize=3D0x08000000
modetty0=3D0,n,8,1,hw
board=3DRouterStation PRO
ethaddr=3D00.15.6d.c8.c9.2c
CPU platform: Atheros AR7161 rev 2
CPU Frequency=3D720 MHz
CPU DDR Frequency=3D360 MHz
CPU AHB Frequency=3D180 MHz
platform frequency: 720000000
arguments:
a0 =3D 00000002
a1 =3D 80050028
a2 =3D 80050000
a3 =3D 0000000a
Cmd line: =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD~=EF=BF=BD=EF=BF=BD=
w=EF=BF=BD=EF=BF=BD.=DF=B7=EF=BF=BD=EF=BF=BD=EF=BF=BD=7F=EF=BF=BD=7F=EF=BF=
=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=7Fc=EF=
=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=
=BD=EF=BF=BD=EF=BF=BD=7F=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=7F=EF=BF=BD=EF=
=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=
=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=
=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=
=BF=BD=7F=EF=BF=BD=EF=BF=BD=7F]=EF=BF=BDo=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=
=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=7F_=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=
=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=7F=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD?=
=EF=BF=BD=7FS
Environment:
memsize =3D 0x08000000
modetty0 =3D 0,n,8,1,hw
ethaddr =3D 00.15.6d.c8.c9.2c
board =3D RouterStation PRO
Cache info:
picache_stride =3D 4096
picache_loopcount =3D 16
pdcache_stride =3D 4096
pdcache_loopcount =3D 8
cpu0: MIPS Technologies processor v116.147
MMU: Standard TLB, 16 entries
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
Config1=3D0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config3=3D0x20
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #2: Tue Mar 6 15:25:15 CET 2012
root@freebsd-re-9:/usr/obj/mips.mipseb/usr/src/sys/RSPRO_NFS mips
WARNING: WITNESS option enabled, expect reduced performance.
MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
MEMGUARD map base: 0xc0800000
MEMGUARD map limit: 0xc1c00000
MEMGUARD map size: 20480 KBytes
real memory =3D 134217728 (131072K bytes)
avail memory =3D 122867712 (117MB)
random device not loaded; using insecure entropy
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 360000000 Hz quality 800
Event timer "MIPS32" frequency 360000000 Hz quality 800
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> on apb0
uart0: console (115200,n,8,1)
gpio0: <Atheros AR71XX GPIO driver> on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x0
gpio0: function_clear: 0x0
gpio0: gpio pinmask=3D0xff
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 2 on gpiobus0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem
0x1b000000-0x1bffffff irq 1 on nexus0
usbus0: set host controller mode
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0: <AR71XX Integrated USB 2.0 controller> on ehci0
pcib0 at irq 0 on nexus0
pci0: <PCI bus> on pcib0
pci0: <old, non-VGA display device> at device 0.0 (no driver attached)
ath0: <Atheros 5413> irq 0 at device 17.0 on pci0
ath0: AR5413 mac 10.5 RF5413 phy 6.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063
ath1: <Atheros 5413> irq 1 at device 18.0 on pci0
ath1: AR5413 mac 10.5 RF5413 phy 6.1
ath1: 2GHz radio: 0x0000; 5GHz radio: 0x0063
arge0: <Atheros AR71xx built-in ethernet interface> at mem
0x19000000-0x19000fff irq 2 on nexus0
miibus0: <MII bus> on arge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 4 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto
arge0: Ethernet address: 00:15:6d:c8:c9:2c
arge1: <Atheros AR71xx built-in ethernet interface> at mem
0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Ethernet address: 00:15:6d:c8:c9:2d
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
mx25l0: mx25ll128, sector 65536 bytes, 256 sectors
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Atheros> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
bootpc_init: wired to interface 'arge0'
Sending DHCP Discover packet from interface arge0 (00:15:6d:c8:c9:2c)
arge0: link state changed to DOWN
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <Generic> at usbus0
umass0: <Generic USB Storage, class 0/0, rev 2.00/94.54, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks =3D 0x4100
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not prese=
nt)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Generic STORAGE DEVICE 9454> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
DHCP/BOOTP timeout for server 255.255.255.255
arge0: initialization failed: no memory for rx buffers
DHCP/BOOTP timeout for server 255.255.255.255
arge0: initialization failed: no memory for rx buffers
--=20
Monthadar Al Jaberi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BsBSoKsHivc=fe2G=0OOwbdr6r2VnQd-zZOBxKKXV2gk_PAJw>