From owner-freebsd-hackers Tue May 9 8:44: 0 2000 Delivered-To: freebsd-hackers@freebsd.org Received: from verdi.nethelp.no (verdi.nethelp.no [158.36.41.162]) by hub.freebsd.org (Postfix) with SMTP id 2EDF937BE15 for ; Tue, 9 May 2000 08:43:51 -0700 (PDT) (envelope-from sthaug@nethelp.no) Received: (qmail 81906 invoked by uid 1001); 9 May 2000 15:43:49 +0000 (GMT) To: des@flood.ping.uio.no Cc: hackers@freebsd.org Subject: Re: Netfinity 5600 patches From: sthaug@nethelp.no In-Reply-To: Your message of "09 May 2000 13:19:07 +0200" References: X-Mailer: Mew version 1.05+ on Emacs 19.34.2 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Date: Tue, 09 May 2000 17:43:49 +0200 Message-ID: <81904.957887029@verdi.nethelp.no> Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I still have uncommitted patches that add support for the Netfinity > 5600's host-to-PCI bridge. They're not perfect, but they work fine. > > As far as I can see, these patches aren't needed for 4.0-STABLE. I have a 4.0-STABLE system here with no kernel patches, and it seems to be working fine. Note that there is already support for the RCC chipsets in /sys/i386/isa/pcibus.c. See attached boot messages. For 3.x, isn't Andrew Gallatin's patch more general? See http://docs.FreeBSD.org/cgi/getmsg.cgi?fetch=60828+0+archive/2000/freebsd-smp/20000423.freebsd-smp However, if anybody can tell me why there seems to be quite a bit of overlap between nexus_pcib_is_host_bridge (/sys/i386/isa/pcibus.c) and chip_match (/sys/pci/pcisupport.c), I'd be happy. Examples of overlap are: 0x00011039 (SiS 5591 host to AGP bridge) and 0x00051004 (VLSI 82C592 Host to PCI bridge). Steinar Haug, Nethelp consulting, sthaug@nethelp.no ---------------------------------------------------------------------- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #0: Tue May 9 15:55:31 CEST 2000 toor@mail1.enitel.no:/local/freebsd/stable4/src/sys/compile/MAIL1_SMP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon (599.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387fbff real memory = 939503616 (917484K bytes) avail memory = 910626816 (889284K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 IOAPIC #1 intpin 0 -> irq 16 IOAPIC #1 intpin 2 -> irq 17 IOAPIC #1 intpin 3 -> irq 18 IOAPIC #1 intpin 4 -> irq 21 IOAPIC #1 intpin 5 -> irq 22 IOAPIC #1 intpin 6 -> irq 23 IOAPIC #1 intpin 10 -> irq 5 IOAPIC #1 intpin 11 -> irq 2 IOAPIC #1 intpin 12 -> irq 19 IOAPIC #1 intpin 13 -> irq 20 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 14, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 15, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc0323000. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: at 1.0 pci0: (vendor=0x1022, dev=0x2000) at 2.0 irq 2 ahc0: port 0x2200-0x22ff mem 0xfebfe000-0xfebfefff irq 16 at device 9.0 on pci0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs pcib3: at device 10.0 on pci0 pci1: on pcib3 fxp0: port 0x3100-0x311f mem 0xfe800000-0xfe8fffff,0xfea00000-0xfea00fff irq 17 at device 4.0 on pci1 fxp0: Ethernet address 00:d0:b7:5f:b7:a8 fxp1: port 0x3120-0x313f mem 0xfe900000-0xfe9fffff,0xfea01000-0xfea01fff irq 18 at device 5.0 on pci1 fxp1: Ethernet address 00:d0:b7:5f:b7:a9 isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x840-0x84f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 pci0: at 15.2 irq 9 pcib2: on motherboard pci2: on pcib2 ahc1: port 0x4b00-0x4bff mem 0xf6fff000-0xf6ffffff irq 19 at device 3.0 on pci2 ahc1: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: port 0x4c00-0x4cff mem 0xf6ffe000-0xf6ffefff irq 19 at device 3.1 on pci2 ahc2: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs ti0: mem 0xf6ff8000-0xf6ffbfff irq 21 at device 5.0 on pci2 ti0: Ethernet address: 00:a0:cc:73:32:dd fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 SMP: AP CPU #1 Launched! acd0: CDROM at ata0-master using PIO4 Waiting 3 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) pass1 at ahc0 bus 0 target 0 lun 1 pass1: Removable Changer SCSI-2 device pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) pass4 at ahc1 bus 0 target 15 lun 0 pass4: Fixed Processor SCSI-2 device pass4: 3.300MB/s transfers da0 at ahc1 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message