Date: Tue, 14 Aug 2018 18:28:29 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: Greg V <greg@unrelenting.technology> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Rockchip RK3399 (ROCKPro64) boots to multiuser Message-ID: <CAGtf9xM9XtNXnvUCzuLkM7dHESoZVfjcJw1o8h_wcTs81eL_fQ@mail.gmail.com> In-Reply-To: <CAGtf9xMcuTz68LEbWkvjn9FfTC5qmsp2_Bcx2MH6R9xA2dyQFA@mail.gmail.com> References: <1533577708.4175.0@hraggstad.unrelenting.technology> <CAGtf9xPB2Rc-8L9fJuKLRRFgfA6hzcf3z6G-nALj4f6jX%2BKn1g@mail.gmail.com> <1534020520.35460.1@hraggstad.unrelenting.technology> <CAGtf9xMcuTz68LEbWkvjn9FfTC5qmsp2_Bcx2MH6R9xA2dyQFA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Aug 14, 2018 at 12:08 AM, Ganbold Tsagaankhuu <ganbold@gmail.com> wrote: > > > On Sun, Aug 12, 2018 at 4:48 AM, Greg V <greg@unrelenting.technology> > wrote: > >> >> >> On Sat, Aug 11, 2018 at 3:09 PM, Ganbold Tsagaankhuu <ganbold@gmail.com> >> wrote: >> >>> >>> >>> On Tue, Aug 7, 2018 at 1:48 AM, Greg V <greg@unrelenting.technology> >>> wrote: >>> >>>> Hi, >>>> >>>> I managed to boot FreeBSD on the Rockchip RK3399 SoC (Pine64 ROCKPro64 >>>> board): >>>> >>>> https://gist.github.com/myfreeweb/5f5b9e56f9a0fd1d63a46c34886f5ad1 >>>> >>>> >>> Very nice. I have NanoPC-T4 board and will test your patch. >>> Did you try to load kernel via tftp at u-boot prompt? like: >>> >>> tftpboot 0x02000000 kernel.bin, go 0x02000000 >>> >>> Does it work for you that way? >>> >> >> kernel.bin?? EFI has always been the way to go with aarch64 (and I think >> it's even recommended on armv7/6 too). >> >> I do it like this: >> >> env set serverip 192.168.1.2 >> env set bootargs boot.nfsroot.server=${serverip} >> boot.nfsroot.path=/some/path comconsole_speed=${baudrate} >> tftpboot ${kernel_addr_r} loader.efi >> tftpboot ${fdt_addr_r} dtb/rockchip/rk3328-rock64.dtb >> bootefi ${kernel_addr_r} ${fdt_addr_r} >> >> But the more-automated way (fully configured by dhcp) should work too, at >> least if you don't have dhcp and tftp on different servers >> > > > Thank you. > I've managed to boot NanoPC-T4 board with your patches using loader.efi on > fat partition on SD card: > > http://dpaste.com/0Y00M4B > > I used rk3399-rockpro64.dtb, as rk3399-nanopi4-rev00.dtb is somehow not > working for me. > Finally managed to do network boot to multiuser: http://dpaste.com/2573EV8 Maybe will try again rk3399-nanopi4-rev00.dtb. Ganbold > > Ganbold > > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xM9XtNXnvUCzuLkM7dHESoZVfjcJw1o8h_wcTs81eL_fQ>