From owner-freebsd-stable Sun Dec 23 2: 2:19 2001 Delivered-To: freebsd-stable@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id B0B4437B419 for ; Sun, 23 Dec 2001 02:01:56 -0800 (PST) Received: from colt.ncptiddische.net (ppp-317.wobline.de [212.68.71.38]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBNA1c816100; Sun, 23 Dec 2001 11:01:38 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBNA3YX50115; Sun, 23 Dec 2001 11:03:35 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBNA26k01450; Sun, 23 Dec 2001 11:02:06 +0100 (CET) (envelope-from nils) Date: Sun, 23 Dec 2001 11:01:30 +0100 From: Nils Holland To: Matthew Dillon Cc: freebsd-stable@FreeBSD.ORG Subject: Re: NFS problems in 4.5-PRERELEASE Message-ID: <20011223110130.B1269@tisys.org> Mail-Followup-To: Matthew Dillon , freebsd-stable@FreeBSD.ORG References: <20011223005213.A57692@tisys.org> <200112230459.fBN4x0u99894@apollo.backplane.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200112230459.fBN4x0u99894@apollo.backplane.com>; from dillon@apollo.backplane.com on Sat, Dec 22, 2001 at 08:59:00PM -0800 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 10:42AM up 16 mins, 1 user, load averages: 0.04, 0.01, 0.00 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 22, 2001 at 08:59:00PM -0800, Matthew Dillon stood up and spoke: > > This kinda sounds like a memory allocation failure in the kernel, > perhaps the kernel is running out of KVM. I have a couple of > recommendations and questions. > > * post your kernel config > * post your /var/run/dmesg.boot output I've started looking at the problem again, and the interesting thing is that I have now tarred up /japanese/mnews and deleted the directory, which makes my ports tree copy fine. I'll try again, and then untar mnews again and see what happens. I don't have a clue what the japanese mnews port should have to do with causing this problem... Oh, here is my kernel config and dmesg boot: -> # # JODIE -- Ti Systems kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.35 2001/09/27 17:43:06 alfred Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident JODIE maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support #options MFS #Memory Filesystem #options MD_ROOT #MD is a potential root device options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports #device sio0 at isa? port IO_COM1 flags 0x10 irq 4 #device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device wx # Intel Gigabit Ethernet Card (``Wiseman'') #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? port 0x300 # Xircom Ethernet #device xe # PRISM I IEEE 802.11b wireless NIC. #device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) #pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners #device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # More Added Stuff device pcm options SC_DISABLE_REBOOT pseudo-device vn options UFS_DIRHASH --> (dmesg.boot (This is actually boot -v because I booted that way with the hope of probably finding some helpful information this way...) Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #0: Sat Dec 22 10:04:01 CET 2001 root@poison.ncptiddische.net:/usr/obj/usr/src/sys/JODIE Calibrating clock(s) ... TSC clock: 996730453 Hz, i8254 clock: 1193305 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 996633681 Hz CPU: AMD Athlon(tm) processor (996.63-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff AMD Features=0xc0440000<,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 805240832 (786368K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00385000 - 0x2ffe7fff, 801517568 bytes (195683 pages) avail memory = 779407360 (761140K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fad80 bios32: Entry = 0xfb1f0 (c00fb1f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb220 pnpbios: Found PnP BIOS data at 0xc00fbce0 pnpbios: Entry = f0000:bd10 Rev = 1.0 Other BIOS signatures found: ACPI: 000f79d0 Preloaded elf kernel "kernel" at 0xc035e000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) Using $PIR table, 8 entries at 0xc00fdba0 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=0x1106, dev=0x0305, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 27 found-> vendor=0x1106, dev=0x8305, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0686, revid=0x40 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x06 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d000, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x16 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x16 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d800, size 5 found-> vendor=0x1106, dev=0x3057, revid=0x40 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x3058, revid=0x50 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=10 map[10]: type 1, range 32, base 0000dc00, size 8 map[14]: type 1, range 32, base 0000e000, size 2 map[18]: type 1, range 32, base 0000e400, size 2 found-> vendor=0x10ec, dev=0x8029, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000e800, size 5 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x1002, dev=0x474d, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base d8000000, size 24 map[14]: type 1, range 32, base 0000c000, size 8 map[18]: type 1, range 32, base da000000, size 12 pci1: on pcib1 pci1: (vendor=0x1002, dev=0x474d) at 0.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 ata1: mask=03 status0=50 status1=50 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=14 b=eb ata1: mask=03 status0=10 status1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 pci0: (vendor=0x1106, dev=0x3038) at 7.2 irq 5 pci0: (vendor=0x1106, dev=0x3038) at 7.3 irq 5 chip1: at device 7.4 on pci0 pcm0: port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 10 at device 7.5 on pci0 pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721/9723) pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: ac97 primary codec extended features AMAP pcm: setmap 2e9d0000, 1000; 0xc307c000 -> 2e9d0000 pcm: setmap 2e9f2000, 1000; 0xc307e000 -> 2e9f2000 ed0: port 0xe800-0xe81f irq 11 at device 17.0 on pci0 bpf: ed0 attached ed0: address 00:20:18:2f:42:2d, type NE2000 (16 bit) ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number ed-: ed0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: