From owner-freebsd-mobile Thu Mar 11 13:16:26 1999 Delivered-To: freebsd-mobile@freebsd.org Received: from teknos.teknos.com (teknos-gw.nappr.org [216.0.190.254]) by hub.freebsd.org (Postfix) with ESMTP id 3721E152D1 for ; Thu, 11 Mar 1999 13:16:09 -0800 (PST) (envelope-from salaman@teknos.com) Received: by TEKNOS with Internet Mail Service (5.5.2448.0) id ; Thu, 11 Mar 1999 17:23:11 -0400 Message-ID: <608F4F76C94DD211B93100805F29063A8D8F@TEKNOS> From: Victor Salaman To: 'Scott Mitchell' Cc: "'freebsd-mobile@freebsd.org'" , "'freebsd-xircom@lovett.com'" Subject: Cards I have tested with the Xircom driver Date: Thu, 11 Mar 1999 17:23:04 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org CEM2 (CreditCard Ethernet+Modem) (sometimes doesn't work) ------ Code 136 not found Code 136 not found code Unknown ignored Code 137 not found Code 137 not found code Unknown ignored code Manufacturer ID ignored Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 49 000: 04 01 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 45 74 68 65 72 6e 65 74 2b 4d 6f 64 020: 65 6d 20 49 49 00 43 45 4d 32 00 31 2e 30 30 00 030: ff Version = 4.1, Manuf = [Xircom],card vers = [CreditCard Ethernet+Modem II] Addit. info = [CEM2],[1.00] Tuple #4, code = 0x0 (Null tuple), length = 8 000: 49 52 7e 00 00 00 00 00 Tuple #5, code = 0x0 (Null tuple), length = 8 000: 04 06 00 80 c7 49 52 7e Tuple #6, code = 0x0 (Null tuple), length = 5 000: 05 01 0a 11 42 Tuple #7, code = 0x44 (Card init date), length = 4 000: 3c 8c 49 1e Tuple #8, code = 0x1a (Configuration map), length = 5 000: 01 03 00 08 03 Reg len = 2, config register addr = 0x800, last config = 0x3 Registers: XX------ Tuple #9, code = 0x1b (Configuration entry), length = 23 000: c0 c1 bd 0f 55 c5 19 55 3e e0 17 17 ea 60 f8 03 010: 07 70 bc 86 20 00 20 Config index = 0x0(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4 x 1V, ext = 0x19 Maximum operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 23 address lines IRQ modes: IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12 Memory space length = 0xf860 Max twin cards = 3 Misc attr: Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 01 08 ea 60 f8 02 07 Config index = 0x1 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 02 08 ea 60 e8 03 07 Config index = 0x2 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #12, code = 0x1b (Configuration entry), length = 7 000: 03 08 ea 60 e8 02 07 Config index = 0x3 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #13, code = 0x21 (Functional ID), length = 2 000: 02 00 Serial port/modem Tuple #14, code = 0x22 (Functional EXT), length = 4 000: 00 00 0f 7c Serial interface extension: 8250 UART, Parity - Space,Mark,Odd,Even, Tuple #15, code = 0x22 (Functional EXT), length = 9 000: 01 1f 3f 00 04 00 00 04 00 Modem interface capabilities: Tuple #16, code = 0x22 (Functional EXT), length = 12 000: 02 00 06 3e 0f 03 03 08 03 00 00 b5 Data modem services available: Tuple #17, code = 0x22 (Functional EXT), length = 8 000: 03 00 06 0e 00 00 00 b5 Tuple #18, code = 0xff (Terminator), length = 0 2 slots found [CreditCard 10/100] -------------------------- Code 136 not found Code 136 not found code Unknown ignored code Manufacturer ID ignored Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 44 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31 020: 30 2f 31 30 30 00 31 2e 30 30 00 ff Version = 5.0, Manuf = [Xircom],card vers = [CreditCard 10/100] Addit. info = [CE3-10/100],[1.00] Tuple #4, code = 0x0 (Null tuple), length = 8 000: 51 f4 95 00 00 00 00 00 Tuple #5, code = 0x0 (Null tuple), length = 5 000: 05 01 0a 01 43 Tuple #6, code = 0x44 (Card init date), length = 4 000: 0b 3e 2b 21 Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 01 00 08 03 Reg len = 2, config register addr = 0x800, last config = 0x1 Registers: XX------ Tuple #8, code = 0x1b (Configuration entry), length = 25 000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60 010: 00 00 0f 70 bc 8e 10 00 20 Config index = 0x1(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 3.5 x 100mA Max current average over 1 second: 4 x 100mA Max current average over 10 ms: 4 x 100mA Power down supply current: 1 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 23 address lines IRQ modes: IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12 Memory space length = 0x60 Max twin cards = 0 Misc attr: Tuple #9, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 80 c7 51 f4 95 Voice services available: Tuple #11, code = 0x22 (Functional EXT), length = 2 000: 01 02 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 5 000: 02 80 96 98 00 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 5 000: 02 00 e1 f5 05 Data modem services available: Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 03 01 Tuple #15, code = 0x22 (Functional EXT), length = 2 000: 03 03 Tuple #16, code = 0x22 (Functional EXT), length = 2 000: 05 00 Modem interface capabilities: Tuple #17, code = 0xff (Terminator), length = 0 2 slots found [Compaq Card] -------------------------------------------- Code 136 not found Code 136 not found code Unknown ignored code Manufacturer ID ignored Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 53 000: 05 00 43 6f 6d 70 61 71 00 4e 65 74 65 6c 6c 69 010: 67 65 6e 74 20 31 30 2f 31 30 30 20 50 43 20 43 020: 61 72 64 00 43 50 51 2d 31 30 2f 31 30 30 00 31 030: 2e 30 30 00 ff Version = 5.0, Manuf = [Compaq],card vers = [Netelligent 10/100 PC Card] Addit. info = [CPQ-10/100],[1.00] Tuple #4, code = 0x0 (Null tuple), length = 8 000: 80 f6 00 00 00 00 00 00 Tuple #5, code = 0x0 (Null tuple), length = 5 000: 83 01 0a 01 43 Tuple #6, code = 0x44 (Card init date), length = 4 000: da 6c 4e 24 Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 01 00 08 03 Reg len = 2, config register addr = 0x800, last config = 0x1 Registers: XX------ Tuple #8, code = 0x1b (Configuration entry), length = 25 000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60 010: 00 00 0f 70 bc 8e 10 00 20 Config index = 0x1(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 3.5 x 100mA Max current average over 1 second: 4 x 100mA Max current average over 10 ms: 4 x 100mA Power down supply current: 1 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 23 address lines IRQ modes: IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12 Memory space length = 0x60 Max twin cards = 0 Misc attr: Tuple #9, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 80 5f d8 f6 80 Voice services available: Tuple #11, code = 0x22 (Functional EXT), length = 2 000: 01 02 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 5 000: 02 80 96 98 00 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 5 000: 02 00 e1 f5 05 Data modem services available: Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 03 01 Tuple #15, code = 0x22 (Functional EXT), length = 2 000: 03 03 Tuple #16, code = 0x22 (Functional EXT), length = 2 000: 05 00 Modem interface capabilities: Tuple #17, code = 0xff (Terminator), length = 0 2 slots found -----Original Message----- From: Scott Mitchell [mailto:rsm@acm.org] Sent: Tuesday, March 09, 1999 1:42 PM To: Victor Salaman Subject: Xircom driver On Tue, Feb 02, 1999 at 01:55:07PM -0400, Victor Salaman wrote: > I have tested on a Compaq Card 10/100, a CE3 Card and a CE2.... and it > works... Hi Victor, Sorry to bother you again; I'm trying to clear out all the unresolved mail in my Xircom box. Could you confirm that the driver does in fact work on all of the cards you listed above? It would also be helpful if you could mail me a copy of the 'pccardc dumpcis' output for each of those cards, for comparison with hardware that doesn't work :( The best thing is probably to send these to the mailing list at so the other folks hacking on the driver get to see them as well. Have you tried the newer versions of the driver yet? The media selection is (mostly) working now so it should be more pleasant to use. Many thanks in advance, Scott -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just | 0x54B171B9 | like a dried up piece of roast goat" QMW College, London, UK | 0xAA775B8B | -- J. S. Bach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message