Date: Tue, 21 Mar 2017 15:26:49 +0300 From: =?UTF-8?B?w5Z6a2FuIEtJUklL?= <ozkan.kirik@gmail.com> To: "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: if_epair altq support problem Message-ID: <CAAcX-AFJ4mmFQt2k3gdsG4c8g3d-ypzSFpypQLQF_3Jdw0W3ew@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I sent this email also to freebsd-pf list. But I think that the main problem is belongs to sys/net/if_epair.c. I'm using FreeBSD 10.3-p17 amd64. epair pseudo device is listed as supperted deviced at the Man page of altq(4). >From man page of altq : *SUPPORTED DEVICES <https://www.freebsd.org/cgi/man.cgi?query=3Daltq#end>* The driver modifications described in altq(9) <https://www.freebsd.org/cgi/man.cgi?query=3Daltq&sektion=3D9&apropos=3D0&m= anpath=3DFreeBSD+11.0-RELEASE+and+Ports> are required to use a cer- tain network card with *ALTQ*. They have been applied to the followin= g hardware drivers: ae(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dae&sektion=3D4&apropos=3D0&man= path=3DFreeBSD+11.0-RELEASE+and+Ports>, age(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dage&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, alc(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dalc&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, ale(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dale&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, an(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dan&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, ath(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dath&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, aue(4) <https://www.freebsd.org/cgi/man.cgi?query=3Daue&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, axe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Daxe&sektion=3D4&ap= ropos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, bce(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbce&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, bfe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbfe&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, bge(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbge&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, bxe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbxe&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, cas(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dcas&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, cxgbe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dcxgbe&sektion=3D4&apr= opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, dc(4) <https://www.freebsd.org/cgi/man.cgi?query=3Ddc&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, de(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dde&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, ed(4) <https://www.freebsd.org/cgi/man.cgi?query=3Ded&sektion=3D4&apro= pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, em(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dem&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, ep(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dep&sektion=3D4&apropos= =3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, epair(4) <https://www.freebsd.org/cgi/man.cgi?query=3Depair&sektion=3D4&apr= opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, .... But while trying to use it the system says that it's not suppoerted. I tried on FreeBSD 11 also. The output is below: pf.conf : altq on epair0b hfsc bandwidth 1Mb queue { ftp, ssh, icmp, other } queue ftp bandwidth 30% priority 0 hfsc (upperlimit 99%) queue ssh bandwidth 30% priority 2 hfsc (upperlimit 99%) queue icmp bandwidth 10% priority 2 hfsc (upperlimit 99%) queue other bandwidth 30% priority 1 hfsc (default upperlimit 99%) # ifconfig epair0 create # ifconfig epair0a up # ifconfig epair0b up # pfctl -f pf.conf pfctl: epair0b: driver does not support altq # sysctl -a | grep ALTQ options ALTQ_NOPCC options ALTQ_PRIQ options ALTQ_CDNR options ALTQ_HFSC options ALTQ_RIO options ALTQ_RED options ALTQ_CBQ options ALTQ I have a look on /usr/src/sys/net/if_epair.c, and found the ALTQ section: 514 #ifdef ALTQ 515 /* Support ALTQ via the clasic if_start() path. */ 516 IF_LOCK(&ifp->if_snd); 517 if (ALTQ_IS_ENABLED(&ifp->if_snd)) { 518 ALTQ_ENQUEUE(&ifp->if_snd, m, NULL, error); 519 if (error) 520 ifp->if_snd.ifq_drops++; 521 IF_UNLOCK(&ifp->if_snd); 522 if (!error) { 523 ifp->if_obytes +=3D len; 524 if (mflags & (M_BCAST|M_MCAST)) 525 ifp->if_omcasts++; 526 527 if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) =3D= =3D 0) 528 epair_start_locked(ifp); 529 else 530 (void)epair_add_ifp_for_draining(ifp); 531 } 532 return (error); 533 } 534 IF_UNLOCK(&ifp->if_snd); 535 #endif I have no idea that why it says that it doesn't support altq altough the source code contains ALTQ section. Regards =C3=96zkan KIRIK
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAcX-AFJ4mmFQt2k3gdsG4c8g3d-ypzSFpypQLQF_3Jdw0W3ew>