Date: Sun, 17 Jan 2021 17:24:40 +0100 From: Torfinn Ingolfsen <torfinn.ingolfsen@getmail.no> To: freebsd-arm@FreeBSD.org Subject: Re: Getting RPi4b (8GB) to boot from a microSD card? Message-ID: <20210117172440.fea7f9ed48a68bc3faa90e66@getmail.no> In-Reply-To: <F6309BC4-E435-4B2F-B449-4ADC01AD8FA1@googlemail.com> References: <20210116223141.49336596dcac9970e3c0442b@getmail.no> <20210116232736.2002f4dd4a18faa6beed0289@getmail.no> <2868BA35-B046-4EC4-B0B7-A6B0717E1EE4@googlemail.com> <20210117152548.30ab864e92385bd4ced120f7@getmail.no> <F6309BC4-E435-4B2F-B449-4ADC01AD8FA1@googlemail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 17 Jan 2021 16:32:55 +0100 Klaus K=FCchemann <maciphone2@googlemail.com> wrote: > Hi Torfinn, >=20 > your eeprom is O.K.,=20 > I have now checked the current upstream state of Firmware : > >> bcm2711-rpi-4-b.dtb > is meanwhile O.K. upstream , so I abandoned=20 > >> https://reviews.freebsd.org/D26853 >=20 > What is currently NOT O.K:=20 > fixup4.dat AND start4.elf in upstream . >=20 > So you should be fine with reverting fixup4.dat AND start4.elf to older v= ersion. Thanks - using older versions helped. > https://sourceforge.net/projects/d26853-bcm2711-rpi-4-b-dtb/files/=20 > (inside the rpi4_pack_freebsd.zip) Using fixup4.dat and start4.elf from this zip file works, with one caveat: = if the usb receiver for my keyboard and mouse (Rapoo E9100P) is in a usb port when the boot starts, the boot (at least some of the console = output) goes extremely slowly and eventually fails. If I insert it after the kernel has booted (after the login prompt shows up= ) the usb keyboard and mouse works normally. usbconfig output: root@generic:~ # usbconfig ugen0.1: <0x1106 XHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DSUPER (5= .0Gbps) pwr=3DSAVE (0mA) ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH= (480Mbps) pwr=3DSAVE (100mA) ugen0.3: <RAPOO RAPOO 5G Wireless Device> at usbus0, cfg=3D0 md=3DHOST spd= =3DFULL (12Mbps) pwr=3DON (200mA) --=20 Torfinn Ingolfsen <torfinn.ingolfsen@getmail.no>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20210117172440.fea7f9ed48a68bc3faa90e66>