Date: Tue, 23 Mar 1999 23:13:41 -0500 From: Mark Fullmer <maf@net.ohio-state.edu> To: dg@root.com Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Mylex DAC960SX question Message-ID: <19990323231341.A24357@net.ohio-state.edu> In-Reply-To: <199903230038.QAA19330@implode.root.com>; from David Greenman on Mon, Mar 22, 1999 at 04:38:30PM -0800 References: <19990322164245.A16014@net.ohio-state.edu> <199903230038.QAA19330@implode.root.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Looks like the DAC960SX is misconfigured. I use that RAID controller on > wcarchive and it works fine if properly configured. It shouldn't be reporting > unused LUNs for one thing. Also, you might try changing something in the > Adaptec SCSI BIOS config and saving the results. I've found that there seems > to be an parameter initialization problem (with FreeBSD) on new ahc boards if > you don't do this first. Something was confused, I'm not sure what though. After creating a DOS boot floppy with the Adaptec ASPI drivers on it and rebuilding the array with RAIDfx everything appears normal. da1 at ahc0 bus 0 target 1 lun 0 da1: <MYLEX DAC960SX246673B5 4332> Fixed Direct Access SCSI2 device da1: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 246673MB (505186304 512 byte sectors: 255H 63S/T 31446C) /dev/da1s1e 503089182 2 462842046 0% /home/crunch1/c Thanks. -- mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990323231341.A24357>