Date: Mon, 8 Feb 2010 22:13:09 +0000 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: freebsd-sparc64@freebsd.org Subject: mount_msdosfs fails, but works ok on i386 Message-ID: <20100208221309.GA33339@mech-cluster241.men.bris.ac.uk>
next in thread | raw e-mail | index | archive | help
On 9.0-current sparc64 I'm trying to mount an msdos usb flash drive. I get this error: ugen0.2: <Kingston> at usbus0 umass0: <Kingston DataTraveler II+, class 0/0, rev 2.00/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <Kingston DataTraveler II+ PMAP> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 1967MB (4029440 512 byte sectors: 255H 63S/T 250C) g_vfs_done():da0[READ(offset=512, length=8192)]error = 5 mount_msdosfs: /dev/da0: Input/output error It mounts fine on i386 9.0-current. Please advise many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100208221309.GA33339>