Date: Mon, 13 Apr 1998 09:48:18 +0300 From: Ruslan Ermilov <ru@ucb.crimea.ua> To: freebsd-questions@FreeBSD.ORG Subject: Re: Cyclades Cyclom-16Ye problem Message-ID: <19980413094818.52972@ucb.crimea.ua> In-Reply-To: <Pine.BSF.3.96.980413020326.545A-100000@gv.tdd.lt>; from Gediminas Vilutis on Mon, Apr 13, 1998 at 02:35:26AM %2B0200 References: <Pine.BSF.3.96.980413020326.545A-100000@gv.tdd.lt>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Apr 13, 1998 at 02:35:26AM +0200, Gediminas Vilutis wrote: > Hello, > > Can't make Cyclades Cyclom-16Ye multiport card (ISA interface card with > external 16 port module) to work with 2.2.6-RELEASE. > > Tried this card on two different computers (machines without any > "special" features - NE2000 compatible network cards, S3 video). > Card is detected by kernel without any problem. But when I try > to connect a modem or some other serial device to it, I can't get > any response at all, or get garbage. When I connect modem and try > to type AT commands to it, TX and RX lights twinkle, but I don't get > response into my terminal program. When I connect cisco console > to it, i get only garbage. Various experiments with port settings > (with stty) and compile time settings in cy.c didn't change anything. > > This does not seem to be a hardware problem. Card works perfectly in > Linux (kernel 2.0.33 + patches from Cyclades) and DOS on same machine. > So, I assume, something wrong is with driver or there is some special > setup procedure. Maybe hardware changed (my interface card is v. 2.03) > since driver was written? Anybody has this card working under FreeBSD? > > Any help would be greatly appreciated. I'm using Cyclom-8Ye on 2.2.6-STABLE without any problems. But my card's firmware is less than 2.03 (I don't remember exactly). Have you tried to test it with cyctest.exe? Regards, -- Ruslan Ermilov System Administrator ru@ucb.crimea.ua United Commercial Bank +380-652-247647 Simferopol, Crimea 2426679 ICQ Network, UIN To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980413094818.52972>