Date: Thu, 30 Apr 2009 09:23:34 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: Anton Shterenlikht <mexas@bristol.ac.uk> Cc: freebsd-x11@freebsd.org, freebsd-current@freebsd.org Subject: Re: Intel i845 - drm error: Message-ID: <1241101414.1761.17.camel@balrog.2hip.net> In-Reply-To: <20090430125204.GA77491@mech-cluster238.men.bris.ac.uk> References: <20090430125204.GA77491@mech-cluster238.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-9Q8yTSoRnXkLopnRCzVJ Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable On Thu, 2009-04-30 at 13:52 +0100, Anton Shterenlikht wrote: > On i386 8.0-current, with intel i845 chipset, with=20 >=20 > Option "AccelMethod" "UXA" >=20 > in device section of xorg.conf I get this error: >=20 > error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called > without lock held UXA doesn't work for us... I haven't tracked this fully, but I'm fairly certain that UXA requires GEM. I get the same error when I attempt to enable UXA. I'll look at it some more... > and these 3 lines at the bottom of the Xorg.0.log: >=20 > (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled > (WW) intel(0): Existing errors found in hardware state. > _fence_emit_internal: drm_i915_irq_emit: 22 >=20 > If I don't use UXA I get a warning in the X log file that it must be > enabled for DRI2. >=20 > Should I submit a PR? Yes, go ahead and file one... I keep losing track of issues, so I need to start getting people to file PRs... I don't know if I can do much about this one yet though... robert. > xorg.conf, dmesg, and Xorg.0.log are below. >=20 > many thanks > anton >=20 > ******************* > dmesg > ******************* >=20 > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-CURRENT #0: Thu Apr 30 13:16:01 BST 2009 > mexas@mech-Anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/EDGE > WARNING: WITNESS option enabled, expect reduced performance. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.10-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=3D0x400<CNXT-ID> > real memory =3D 536870912 (512 MB) > avail memory =3D 507289600 (483 MB) > acpi0: <INTEL D845GRG2> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 1f700000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xffa80000-0x= ffafffff irq 11 at device 2.0 on pci0 > agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0 > agp0: detected 8060k stolen memory > agp0: aperture size is 128M > drm0: <Intel i845G GMCH> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] AGP at 0xf0000000 128MB > info: [drm] Initialized i915 1.6.0 20080730 > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq= 11 at device 29.0 on pci0 > uhci0: [ITHREAD] > uhci0: LegSup =3D 0x0f30 > usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq= 3 at device 29.1 on pci0 > uhci1: [ITHREAD] > uhci1: LegSup =3D 0x0f30 > usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq= 5 at device 29.2 on pci0 > uhci2: [ITHREAD] > uhci2: LegSup =3D 0x0f30 > usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffa7fc00-0xffa= 7ffff irq 9 at device 29.7 on pci0 > ehci0: [ITHREAD] > usbus3: EHCI version 1.0 > usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xff8ff000= -0xff8fffff irq 10 at device 0.0 on pci1 > ahc0: [ITHREAD] > aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs > fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xdc00-0xdc3f mem 0= xff8fe000-0xff8fefff irq 11 at device 8.0 on pci1 > miibus0: <MII bus> on fxp0 > inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:07:e9:e7:41:dc > fxp0: [ITHREAD] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x1= 77,0x376,0xffa0-0xffaf at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pci0: <multimedia, audio> at device 31.5 (no driver attached) > acpi_button0: <Sleep Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,= 0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppc0: [ITHREAD] > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: [ITHREAD] > lpt0: <Printer> on ppbus0 > lpt0: [ITHREAD] > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model IntelliMouse, device ID 3 > cpu0: <ACPI CPU> on acpi0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xcb800-0xcbfff pnpid ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2400101316 Hz quality 800 > Timecounters tick every 1.000 msec > Waiting 5 seconds for SCSI devices to settle > (probe0:ahc0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe0:ahc0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe1:ahc0:0:1:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe1:ahc0:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe2:ahc0:0:2:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe2:ahc0:0:2:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe3:ahc0:0:3:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe4:ahc0:0:4:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe4:ahc0:0:4:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe5:ahc0:0:5:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe5:ahc0:0:5:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe6:ahc0:0:6:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe6:ahc0:0:6:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe7:ahc0:0:8:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe7:ahc0:0:8:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe8:ahc0:0:9:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe8:ahc0:0:9:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe9:ahc0:0:10:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe9:ahc0:0:10:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe10:ahc0:0:11:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe10:ahc0:0:11:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe11:ahc0:0:12:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe11:ahc0:0:12:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe12:ahc0:0:13:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe12:ahc0:0:13:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe13:ahc0:0:14:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe13:ahc0:0:14:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > (probe14:ahc0:0:15:0): Probe PROBE_INVALID to PROBE_INQUIRY > (probe14:ahc0:0:15:0): INQUIRY. CDB: 12 0 0 0 24 0=20 > usbus3: 480Mbps High Speed USB v2.0 > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > ad0: 76319MB <WDC WD800BB-00CAA1 17.07W17> at ata0-master UDMA100 > ugen3.1: <Intel> at usbus3 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen0.1: <Intel> at usbus0 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > acd0: DVDROM <DVD-ROM DDU1621/VER S2.9> at ata1-master UDMA33 > acd1: CDRW <SONY CD-RW CRX210E1/2YS2> at ata1-slave UDMA33 > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > GEOM: ad0s1: geometry does not match label (255h,63s !=3D 16h,63s). > GEOM_LABEL: Label for provider ad0s1a is ufsid/48db6d0a9566784c. > GEOM_LABEL: Label for provider ad0s1d is ufsid/48db6d0ec04acd6f. > GEOM_LABEL: Label for provider ad0s1e is ufsid/48db6d0a1b5ea852. > GEOM_LABEL: Label for provider ad0s1f is ufsid/48db6d0a9c3d25b3. > uhub0: 6 ports with 6 removable, self powered > WARNING: WITNESS option enabled, expect reduced performance. > Trying to mount root from ufs:/dev/ad0s1a > GEOM_LABEL: Label ufsid/48db6d0a9566784c removed. > GEOM_LABEL: Label for provider ad0s1a is ufsid/48db6d0a9566784c. > GEOM_LABEL: Label ufsid/48db6d0a1b5ea852 removed. > GEOM_LABEL: Label for provider ad0s1e is ufsid/48db6d0a1b5ea852. > GEOM_LABEL: Label ufsid/48db6d0a9c3d25b3 removed. > GEOM_LABEL: Label for provider ad0s1f is ufsid/48db6d0a9c3d25b3. > GEOM_LABEL: Label ufsid/48db6d0ec04acd6f removed. > GEOM_LABEL: Label for provider ad0s1d is ufsid/48db6d0ec04acd6f. > GEOM_LABEL: Label ufsid/48db6d0a9566784c removed. > GEOM_LABEL: Label ufsid/48db6d0a1b5ea852 removed. > GEOM_LABEL: Label ufsid/48db6d0a9c3d25b3 removed. > GEOM_LABEL: Label ufsid/48db6d0ec04acd6f removed. > pid 1068 (Xorg), uid 0: exited on signal 11 (core dumped) > drm0: [ITHREAD] > error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called without l= ock held > pid 1104 (Xorg), uid 0: exited on signal 6 (core dumped) > error: [drm:pid1109:i915_irq_emit] *ERROR* i915_irq_emit called without l= ock held > pid 1109 (Xorg), uid 0: exited on signal 6 (core dumped) >=20 >=20 > ********************** > xorg.conf > ********************** >=20 > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > Option "DontZap" "false" > EndSection >=20 > Section "Files" > ModulePath "/usr/local/lib/xorg/modules" > FontPath "/usr/local/lib/X11/fonts/misc/" > FontPath "/usr/local/lib/X11/fonts/TTF/" > FontPath "/usr/local/lib/X11/fonts/OTF" > FontPath "/usr/local/lib/X11/fonts/Type1/" > FontPath "/usr/local/lib/X11/fonts/100dpi/" > FontPath "/usr/local/lib/X11/fonts/75dpi/" > EndSection >=20 > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > EndSection >=20 > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "ColorKey" # <i> > #Option "CacheLines" # <i> > #Option "Dac6Bit" # [<bool>] > #Option "DRI" # [<bool>] > #Option "NoDDC" # [<bool>] > #Option "ShowCache" # [<bool>] > #Option "XvMCSurfaces" # <i> > #Option "PageFlip" # [<bool>] > Option "AccelMethod" "UXA" > Identifier "Card0" > Driver "intel" > VendorName "Intel Corporation" > BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Devic= e" > BusID "PCI:0:2:0" > EndSection >=20 > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection >=20 >=20 > ***************************** > Xorg.0.log > ***************************** >=20 > X.Org X Server 1.6.0 > Release Date: 2009-2-25 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT i386=20 > Current Operating System: FreeBSD mech-Anton240.men.bris.ac.uk 8.0-CURREN= T FreeBSD 8.0-CURRENT #0: Thu Apr 30 13:16:01 BST 2009 mexas@mech-Anton= 240.men.bris.ac.uk:/usr/obj/usr/src/sys/EDGE i386 > Build Date: 06 April 2009 10:59:19AM > =20 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (=3D=3D) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 30 13:40:14 2009 > (++) Using config file: "xorg.conf" > (=3D=3D) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) Option "DontZap" "false" > (=3D=3D) Automatically adding devices > (=3D=3D) Automatically enabling devices > (**) FontPath set to: > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > built-ins > (**) ModulePath set to "/usr/local/lib/xorg/modules" > (II) Cannot locate a core pointer device. > (II) Cannot locate a core keyboard device. > (II) The server relies on HAL to provide the list of input devices. > If no devices become available, reconfigure HAL or disable AllowEmptyInp= ut. > (II) Loader magic: 0x6a0 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 5.0 > X.Org XInput driver : 4.0 > X.Org Server Extension : 2.0 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 >=20 > (--) PCI:*(0@0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset I= ntegrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524= 288, BIOS @ 0x????????/65536 > (II) System resource ranges: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) LoadModule: "extmod" > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "dbe" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (=3D=3D) AIGLX disabled > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "dri" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so > (II) Module dri2: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "intel" > (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so > (II) Module intel: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 2.6.3 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 5.0 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, > 965GM, 965GME/GLE, G33, Q35, Q33, > Mobile Intel=C2=AE GM45 Express Chipset, > Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 0.1.0 > ABI class: X.Org Video Driver, version 5.0 > (=3D=3D) intel(0): Depth 24, (--) framebuffer bpp 32 > (=3D=3D) intel(0): RGB weight 888 > (=3D=3D) intel(0): Default visual is TrueColor > (**) intel(0): Option "AccelMethod" "UXA" > (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G > (--) intel(0): Chipset: "845G" > (--) intel(0): Linear framebuffer at 0xF0000000 > (--) intel(0): IO registers at addr 0xFFA80000 > (**) intel(0): Using UXA for acceleration > (II) intel(0): 1 display pipe available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Monitor0 > (II) intel(0): I2C bus "DVODDC_D" initialized. > (II) Loading sub module "sil164" > (II) LoadModule: "sil164" > (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so > (II) Module sil164: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7xxx" > (II) LoadModule: "ch7xxx" > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so > (II) Module ch7xxx: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ivch" > (II) LoadModule: "ivch" > (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so > (II) Module ivch: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_B" initialized. > (II) Loading sub module "tfp410" > (II) LoadModule: "tfp410" > (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so > (II) Module tfp410: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_B" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7017" > (II) LoadModule: "ch7017" > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7017.so > (II) Module ch7017: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVODDC_D" removed. > (=3D=3D) intel(0): Write-combining range (0xa0000,0x10000) was already cl= ear > (II) intel(0): Resizable framebuffer: available (1 4) > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered a= t address 0x60. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "@@@", prod id 0 > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 = 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 = 603 625 +hsync +vsync (35.2 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 4= 84 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 4= 92 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 4= 86 525 -hsync -vsync (35.0 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 4= 92 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 4= 14 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 = 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 = 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 = 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 = 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 = 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 = 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): EDID vendor "@@@", prod id 0 > (II) intel(0): Output VGA connected > (II) intel(0): Using exact sizes for initial modes > (II) intel(0): Output VGA using initial mode 1024x768 > (=3D=3D) intel(0): Write-combining range (0xa0000,0x10000) was already cl= ear > (II) intel(0): detected 128 kB GTT. > (II) intel(0): detected 8060 kB stolen memory. > (=3D=3D) intel(0): video overlay key set to 0x101fe > (=3D=3D) intel(0): Will not try to enable page flipping > (=3D=3D) intel(0): Triple buffering disabled > (=3D=3D) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (**) intel(0): Display dimensions: (300, 230) mm > (**) intel(0): DPI set to (86, 84) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor=3D"X.Org Foundation" > compiled for 1.6.0, module version =3D 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (II) intel(0): Comparing regs from server start up to After PreInit > (=3D=3D) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 112640 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 450560 kB available > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: drmOpenMinor returns 11 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) intel(0): [DRI2] Setup complete > (**) intel(0): Framebuffer compression disabled > (**) intel(0): Tiling enabled > (=3D=3D) intel(0): VideoRam: 131072 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (II) intel(0): Tiled allocation successful. > (II) intel(0): Page Flipping disabled > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0= x0000 > (=3D=3D) intel(0): Write-combining range (0xa0000,0x10000) was already cl= ear > (II) UXA(0): Driver registered support for the following operations: > (II) solid > (II) copy > (II) composite (RENDER acceleration) > (=3D=3D) intel(0): Backing store disabled > (=3D=3D) intel(0): Silken mouse enabled > (II) intel(0): Initializing HW Cursor > (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x007df000 (pgoffset 201= 5) > (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x00800000 (pgoffset 20= 48) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB) > (II) intel(0): 0x00025000-0x00124fff: fake bufmgr (1024 kB) > (II) intel(0): 0x007df000: end of stolen memory > (II) intel(0): 0x007df000-0x007dffff: overlay registers (4 kB, 0x00000000= 0cdc8000 physical > ) > (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) > (II) intel(0): 0x08000000: end of aperture > (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled > (WW) intel(0): Existing errors found in hardware state. > _fence_emit_internal: drm_i915_irq_emit: 22 >=20 >=20 --=20 Robert Noland <rnoland@FreeBSD.org> FreeBSD --=-9Q8yTSoRnXkLopnRCzVJ Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAkn5tGYACgkQM4TrQ4qfROP0ZACaAjiiX7SoKVTN+KFvkJ2ga8XH DXoAoIkCsmZVi+GuEUObQSxwBkSDuYUD =cWER -----END PGP SIGNATURE----- --=-9Q8yTSoRnXkLopnRCzVJ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1241101414.1761.17.camel>