Date: Thu, 13 Dec 2001 19:57:04 -0500 From: Jacob Frelinger <jolly@thecoffinclub.com> To: freebsd-questions@freebsd.org Subject: mt: /dev/nsa0: Device not configured Message-ID: <20011213195704.A28371@thecoffinclub.com>
next in thread | raw e-mail | index | archive | help
--+HP7ph2BbKc20aGI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline i'm having trouble getting a dat drive working in freebsd-stable (4.4). its a seagate turbodat autoloader (dds2), and the kernel probes it happily (see attached dmesg) and the scsi chain is correctly terminated. any commands that access the tape drive come back with " /dev/nsa0: Device not configured" please cc me in replies as i'm not currently supscribed to freebsd-questions -- Jacob "I'm Brainy For Zombie Pops" Frelinger Resident Psycho http://www.thecoffinclub.com Jolly at TheCoffinClub dot Com --+HP7ph2BbKc20aGI Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #1: Thu Sep 27 18:44:35 EDT 2001 root@eve.thecoffinclub.com:/usr/obj/usr/src/sys/EVE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (199.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping = 7 Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV> real memory = 100663296 (98304K bytes) config> q avail memory = 94552064 (92336K bytes) Preloaded elf kernel "kernel" at 0xc035a000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035a09c. Pentium Pro MTRR support enabled md0: Malloc disk apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 vx0: <3COM 3C595 Fast Etherlink III PCI> port 0x7f80-0x7f9f irq 10 at device 9.0 on pci0 utp/tx[*tx*]: disable 'auto select' with DOS util! address 00:a0:24:cd:af:6b vx0: driver is using old-style compatibility shims ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xffaff000-0xffafffff irq 11 at device 10.0 on pci0 aic7880: Ultra Single Channel A, SCSI Id=7, 16/255 SCBs isa0: too many dependant configs (8) isa0: unexpected small tag 14 orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xf1000-0xf1fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 pcm0: <SB16 DSP 4.16> on sbc0 ad0: 9641MB <Maxtor 91010D6> [19590/16/63] at ata0-master WDMA2 Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 4 lun 0 sa0: <ARCHIVE 4586XX 28887-XXX 0420> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) pass2 at ahc0 bus 0 target 4 lun 1 pass2: <ARCHIVE 4586XX 28887-XXX 0420> Removable Changer SCSI-2 device pass2: 5.000MB/s transfers (5.000MHz, offset 15) Mounting root from ufs:/dev/ad0s1a cd0 at ahc0 bus 0 target 1 lun 0 cd0: <SONY CD-ROM CDU-76S 1.1c> Removable CD-ROM SCSI-2 device cd0: 5.681MB/s transfers (5.681MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 5 lun 0 da0: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device da0: 3.300MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present --+HP7ph2BbKc20aGI-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011213195704.A28371>