Date: Mon, 4 Mar 2013 17:33:59 +0000 (UTC) From: Dru Lavigne <dru@FreeBSD.org> To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r41083 - head/en_US.ISO8859-1/books/handbook/install Message-ID: <201303041733.r24HXxaT040899@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: dru Date: Mon Mar 4 17:33:58 2013 New Revision: 41083 URL: http://svnweb.freebsd.org/changeset/doc/41083 Log: This patch removes 7.x, floppies, and QIC. The next patch will make igor happy, fix "you", and cleanup wording. Approved by: bcr (mentor) Modified: head/en_US.ISO8859-1/books/handbook/install/chapter.xml Modified: head/en_US.ISO8859-1/books/handbook/install/chapter.xml ============================================================================== --- head/en_US.ISO8859-1/books/handbook/install/chapter.xml Mon Mar 4 15:52:06 2013 (r41082) +++ head/en_US.ISO8859-1/books/handbook/install/chapter.xml Mon Mar 4 17:33:58 2013 (r41083) @@ -27,7 +27,8 @@ <!-- January 2000 --> </chapterinfo> - <title>Installing &os; 8.<replaceable>X</replaceable> and Earlier</title> + <title>Installing &os; 8.<replaceable>X</replaceable> + </title> <sect1 id="install-synopsis"> <title>Synopsis</title> @@ -97,7 +98,7 @@ <para>A summary of this information is given in the following sections. Depending on the method you choose to install &os;, you may - also need a floppy drive, a supported CDROM drive, and in some + also need a USB drive, a supported CDROM drive, and in some case a network adapter. This will be covered by the <xref linkend="install-boot-media"/>.</para> @@ -546,14 +547,6 @@ <listitem> <para>A &ms-dos; partition on the same computer</para> </listitem> - - <listitem> - <para>A SCSI or QIC tape</para> - </listitem> - - <listitem> - <para>Floppy disks</para> - </listitem> </itemizedlist> <itemizedlist> @@ -591,9 +584,8 @@ computer into the FreeBSD installer—it is not a program you run within another operating system. Your computer normally boots using the operating system installed on your hard disk, but it can also be - configured to use a <quote>bootable</quote> floppy disk. - Most modern computers can also - boot from a CDROM in the CDROM drive or from a USB disk.</para> + configured to boot from a CDROM in the CDROM drive or from a + USB disk.</para> <tip> <para>If you have FreeBSD on CDROM or DVD (either one you purchased @@ -612,14 +604,14 @@ <title>Acquire the Memory Stick Image</title> <para>Memory stick images for - &os; 8.<replaceable>X</replaceable> and earlier can be downloaded from - the <filename class="directory">ISO-IMAGES/</filename> - directory at + &os; 8.<replaceable>X</replaceable> can be + downloaded from <filename + class="directory">ISO-IMAGES/</filename> at <literal>ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/<replaceable>arch</replaceable>/ISO-IMAGES/<replaceable>version</replaceable>/&os;-<replaceable>version</replaceable>-RELEASE-<replaceable>arch</replaceable>-memstick.img</literal>. Replace <replaceable>arch</replaceable> and <replaceable>version</replaceable> with the - architecture and the version number which you want to - install, respectively. For example, the memory stick + architecture and the version number to install, + respectively. For example, the memory stick images for &os;/&arch.i386; &rel2.current;-RELEASE are available from <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/&arch.i386;/ISO-IMAGES/&rel2.current;/&os;-&rel2.current;-RELEASE-&arch.i386;-memstick.img"></ulink>.</para>; @@ -718,123 +710,6 @@ </step> </procedure> - <para>To create boot floppy images, follow these steps:</para> - - <procedure> - <step> - <title>Acquire the Boot Floppy Images</title> - - <important> - <para>Please note, as of &os; 8.<replaceable>X</replaceable>, floppy disk images are - no longer available. Please see above for instructions - on how to install &os; using a USB memory stick or just - use a CDROM or a DVD.</para> - </important> - - <para>The boot disks are available on your installation media - in the <filename>floppies/</filename> directory, and - can also be downloaded from the floppies directory, - <literal>ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/<replaceable>arch</replaceable>/<replaceable>version</replaceable>-RELEASE/floppies/</literal>. - Replace <replaceable>arch</replaceable> and - <replaceable>version</replaceable> - with the architecture and the version number - which you want to install, respectively. - For example, the boot floppy images for - &os;/&arch.i386; &rel2.current;-RELEASE are available - from <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/i386/&rel2.current;-RELEASE/floppies/"></ulink>.</para>; - - <para>The floppy images have a <filename>.flp</filename> extension. - The <filename>floppies/</filename> directory contains a number of - different images, and the ones you will need to use depends on the - version of FreeBSD you are installing, and in some cases, the - hardware you are installing to. - In most cases you will need four - floppies, <filename>boot.flp</filename>, - <filename>kern1.flp</filename>, - <filename>kern2.flp</filename>, and - <filename>kern3.flp</filename>. Check - <filename>README.TXT</filename> in the same directory for the - most up to date information about these floppy images.</para> - - <important> - <para>Your FTP program must use <emphasis>binary mode</emphasis> - to download these disk images. Some web browsers have been - known to use <emphasis>text</emphasis> (or - <emphasis>ASCII</emphasis>) mode, which will be apparent if you - cannot boot from the disks.</para> - </important> - </step> - - <step> - <title>Prepare the Floppy Disks</title> - - <para>You must prepare one floppy disk per image file you had to - download. It is imperative that these disks are free from - defects. The easiest way to test this is to format the disks - for yourself. Do not trust pre-formatted floppies. The format - utility in &windows; will not tell about the presence of - bad blocks, it simply marks them as <quote>bad</quote> - and ignores them. It is advised that you use brand new - floppies if choosing this installation route.</para> - - <important> - <para>If you try to install FreeBSD and the installation - program crashes, freezes, or otherwise misbehaves, one of - the first things to suspect is the floppies. Try writing - the floppy image files to new disks and try - again.</para> - </important> - </step> - - <step> - <title>Write the Image Files to the Floppy Disks</title> - - <para>The <filename>.flp</filename> files are - <emphasis>not</emphasis> regular files you copy to the disk. - They are images of the complete contents of the - disk. This means that you <emphasis>cannot</emphasis> simply - copy files from one disk to another. - Instead, you must use specific tools to write the - images directly to the disk.</para> - - <indexterm><primary>DOS</primary></indexterm> - <para>If you are creating the floppies on a computer running - &ms-dos; / &windows;, then we provide a tool to do - this called <command>fdimage</command>.</para> - - <para>If you are using the floppies from the CDROM, and your - CDROM is the <devicename>E:</devicename> drive, then you would - run this:</para> - - <screen><prompt>E:\></prompt> <userinput>tools\fdimage floppies\boot.flp A:</userinput></screen> - - <para>Repeat this command for each <filename>.flp</filename> - file, replacing the floppy disk each time, being sure to label - the disks with the name of the file that you copied to them. - Adjust the command line as necessary, depending on where you have - placed the <filename>.flp</filename> files. If you do not have - the CDROM, then <command>fdimage</command> can be downloaded from - the <ulink - url="ftp://ftp.FreeBSD.org/pub/FreeBSD/tools/"><filename class="directory">tools</filename> - directory</ulink> on the FreeBSD FTP site.</para> - - <para>If you are writing the floppies on a &unix; system (such as - another FreeBSD system) you can use the &man.dd.1; command to - write the image files directly to disk. On FreeBSD, you would - run:</para> - - <screen>&prompt.root; <userinput>dd if=boot.flp of=/dev/fd0</userinput></screen> - - <para>On FreeBSD, <filename>/dev/fd0</filename> refers to the - first floppy disk (the <devicename>A:</devicename> drive). - <filename>/dev/fd1</filename> would be the - <devicename>B:</devicename> drive, and so on. Other &unix; - variants might have different names for the floppy disk - devices, and you will need to check the documentation for the - system as necessary.</para> - </step> - </procedure> - <para>You are now ready to start installing FreeBSD.</para> </sect2> </sect1> @@ -893,11 +768,10 @@ We can take no responsibility for lost d <literal>First Hard Disk</literal>, and so on.</para> <para>If you are booting from the CDROM then make sure that - the CDROM is selected. If you are booting from a USB disk or - a floppy disk then - make sure that is selected instead. In case of doubt, you - should consult the manual that came with your computer, and/or its - motherboard.</para> + the CDROM is selected. If you are booting from a USB + disk, make sure that is selected instead. In case of + doubt, consult the manual that came with the computer, + and/or its motherboard.</para> <para>Make the change, then save and exit. The computer should now restart.</para> @@ -912,15 +786,6 @@ We can take no responsibility for lost d the computer, and insert the CDROM at the first opportunity.</para> - <note> - <para>For &os; 7.<replaceable>X</replaceable>, installation - boot floppies are available and can be prepared as - described in <xref linkend="install-boot-media"/>. One of - them will be the first boot disc: - <filename>boot.flp</filename>. Put this disc in your - floppy drive and boot the computer.</para> - </note> - <para>If your computer starts up as normal and loads your existing operating system, then either:</para> @@ -969,35 +834,10 @@ FreeBSD/i386 bootstrap loader, Revision Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x64daa0 data=0xa4e80+0xa9e40 syms=[0x4+0x6cac0+0x4+0x88e9d] \</screen> - - <para>If you are booting from floppy disc, you will see a display - similar to this (version information omitted):</para> - - <screen>Booting from Floppy... -Uncompressing ... done - -BTX loader 1.00 BTX version is 1.01 -Console: internal video/keyboard -BIOS drive A: is disk0 -BIOS drive C: is disk1 -BIOS 639kB/261120kB available memory - -FreeBSD/i386 bootstrap loader, Revision 1.1 - -Loading /boot/defaults/loader.conf -/kernel text=0x277391 data=0x3268c+0x332a8 | - -Insert disk labelled "Kernel floppy 1" and press any key...</screen> - - <para>Follow these instructions by removing the - <filename>boot.flp</filename> disc, insert the - <filename>kern1.flp</filename> disc, and press - <keycap>Enter</keycap>. Boot from first floppy; - when prompted, insert the other disks as required.</para> </step> <step> - <para>Whether you booted from CDROM, USB stick or floppy, the + <para>Whether you booted from CDROM or USB stick, the boot process will then get to the &os; boot loader menu:</para> @@ -3067,31 +2907,6 @@ Press [Enter] now to invoke an editor on the post-installation configuration.</para> </sect2> - <sect2 id="linuxcomp"> - <title>Linux Compatibility</title> - - <note> - <para>This part only applies to &os; 7.<replaceable>X</replaceable> - installation, if you install &os; 8.<replaceable>X</replaceable> - this screen will not be proposed.</para> - </note> - - <screen> User Confirmation Requested - Would you like to enable Linux binary compatibility? - - [ Yes ] No</screen> - - <para>Selecting &gui.yes; and pressing - <keycap>Enter</keycap> will allow - running Linux software on FreeBSD. The install will add - the appropriate packages for Linux compatibility.</para> - - <para>If installing by FTP, the machine will need to be connected to - the Internet. Sometimes a remote ftp site will not have all the - distributions like the Linux binary compatibility. This can - be installed later if necessary.</para> - </sect2> - <sect2 id="mouse"> <title>Mouse Settings</title> @@ -4114,8 +3929,8 @@ Please press any key to reboot.</screen> <qandaentry> <question> <para>My system hangs while probing hardware during boot, - or it behaves strangely during install, or the floppy - drive is not probed.</para> + or it behaves strangely during install, or the drive + is not probed.</para> </question> <answer> <para>&os; makes extensive use of the system @@ -4473,11 +4288,6 @@ Please press any key to reboot.</screen> <screen>&prompt.root; <userinput>cu -l /dev/cuau0</userinput></screen> - <para>On &os; 7.<replaceable>X</replaceable> use the following command - instead:</para> - - <screen>&prompt.root; <userinput>cu -l /dev/cuad0</userinput></screen> - </step> </procedure> @@ -4597,7 +4407,7 @@ Please press any key to reboot.</screen> off USB drives. It also supports booting into a <quote>livefs</quote> based rescue mode. The documentation packages are provided but no other - packages. This image is not available for &os; 7.<replaceable>X</replaceable>.</entry> + packages.</entry> </row> <row> @@ -4642,14 +4452,6 @@ Please press any key to reboot.</screen> </tgroup> </table> - <note> - <para>&os; 7.<replaceable>X</replaceable> releases before - &os; 7.3 and &os; 8.0 used a - different naming convention. The names of their ISO - images are not prefixed with - <literal>&os;-</literal>.</para> - </note> - <para>You <emphasis>must</emphasis> download one of either the <literal>bootonly</literal> ISO image, or the image of <literal>disc1</literal>. Do not download @@ -4740,12 +4542,11 @@ Please press any key to reboot.</screen> the install.</para> <note> - <para>If the boot media (floppy disks, usually) for your FTP - clients is not precisely the same version as that provided - by the local FTP site, then <application>sysinstall</application> - will not let you - complete the installation. If the versions are not similar and - you want to override this, you must go into the + <para>If the boot media for the FTP clients is not precisely + the same version as that provided by the local FTP site, + then <application>sysinstall</application> will not complete + the installation. If the versions are not similar and + you want to override this, go into the <guimenu>Options</guimenu> menu and change distribution name to <guimenuitem>any</guimenuitem>.</para> </note> @@ -4760,74 +4561,7 @@ Please press any key to reboot.</screen> </warning> </sect2> - <sect2> - <title>Creating Installation Floppies</title> - - <indexterm> - <primary>installation</primary> - <secondary>floppies</secondary> - </indexterm> - - <para>If you must install from floppy disk (which we suggest you - do <emphasis>not</emphasis> do), either due to unsupported - hardware or simply because you insist on doing things the hard - way, you must first prepare some floppies for the installation.</para> - - <para>At a minimum, you will need as many 1.44 MB floppies - as it takes to hold all the files in the - <filename>base</filename> (base distribution) directory. If - you are preparing the floppies from &ms-dos;, then they - <emphasis>must</emphasis> be formatted using the &ms-dos; - <command>FORMAT</command> command. If you are using &windows;, - use Explorer to format the disks (right-click on the - <devicename>A:</devicename> drive, and select - <quote>Format</quote>).</para> - - <para>Do <emphasis>not</emphasis> trust factory pre-formatted - floppies. Format them again yourself, just to be sure. Many - problems reported by our users in the past have resulted from - the use of improperly formatted media, which is why we are - making a point of it now.</para> - - <para>If you are creating the floppies on another FreeBSD machine, - a format is still not a bad idea, though you do not need to put - a &ms-dos; filesystem on each floppy. You can use the - <command>bsdlabel</command> and <command>newfs</command> - commands to put a UFS filesystem on them instead, as the - following sequence of commands (for a 3.5" 1.44 MB floppy) - illustrates:</para> - - <screen>&prompt.root; <userinput>fdformat -f 1440 fd0.1440</userinput> -&prompt.root; <userinput>bsdlabel -w fd0.1440 floppy3</userinput> -&prompt.root; <userinput>newfs -t 2 -u 18 -l 1 -i 65536 /dev/fd0</userinput></screen> - - <para>Then you can mount and write to them like any other - filesystem.</para> - - <para>After you have formatted the floppies, you will need to copy - the files to them. The distribution files are split into chunks - conveniently sized so that five of them will fit on a conventional - 1.44 MB floppy. Go through all your floppies, packing as many - files as will fit on each one, until you have all of the - distributions you want packed up in this fashion. Each - distribution should go into a subdirectory on the floppy, e.g.: - <filename>a:\base\base.aa</filename>, - <filename>a:\base\base.ab</filename>, and so on.</para> - - <important> - <para>The <filename>base.inf</filename> file also needs to go on the - first floppy of the <filename>base</filename> set since it is read - by the installation program in order to figure out how many - additional pieces to look for when fetching and concatenating the - distribution.</para> - </important> - - <para>Once you come to the Media screen during the install - process, select <guimenuitem>Floppy</guimenuitem> and you - will be prompted for the rest.</para> - </sect2> - - <sect2 id="install-msdos"> + <sect2 id="install-msdos"> <title>Installing from an &ms-dos; Partition</title> <indexterm> @@ -4893,7 +4627,7 @@ Please press any key to reboot.</screen> <note> <para>When starting the installation, the tape must be in the drive <emphasis>before</emphasis> booting from the boot - floppy. The installation probe may otherwise fail to find + media. The installation probe may otherwise fail to find it.</para> </note> </sect2>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201303041733.r24HXxaT040899>