Date: Fri, 8 Mar 2002 11:37:34 +1100 From: "Scott Penno" <scott.penno@gennex.com.au> To: <freebsd-mobile@freebsd.org> Subject: Re: Problems Message-ID: <003b01c1c639$a0dd55a0$0128a8c0@jupiter> References: <002301c1c637$95abf4e0$0128a8c0@jupiter> <200203071634070462.018CDBE4@smtp.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The bridge is being reported as a O2micro 6933 PCI-Cardbus Bridge, so I
thought that the warning message might not apply in this particular case.
Scott.
----- Original Message -----
From: "Greg Smith" <freebsd_mail@yahoo.com>
To: "Scott Penno" <scott.penno@gennex.com.au>
Sent: Friday, March 08, 2002 11:34 AM
Subject: Re: Problems
> Scott,
>
> Cardbus cards are not supported under FreeBSD 4.x.
>
> Also the dmesg is not optimistic about your pcic in general:
>
> pcic0: Warning: O2micro OZ68xx chips may not work
>
> It's not fair if a guy from OZ can't run an OZ pcic, is it?
>
> Greg
>
> -----Original Message-----
>
> >Hi there,
> >
> >I've recently upraded from my Toshiba Satellite to a Dell Inspiron
> 2500.
> >After initial problems booting FreeBSD 4.5 on the i2500, I'm now at
> the
> >point where I'd love to have either of my two network cards working.
> One
> >is
> >a 3Com 3C589D and the other is a Xircom RBEM56G-100.
> >When the rc.pccard is run upon booting, the following message appears:
> >pccardc:
> >ioctl (PIOCRWMEM)
> >:
> >Invalid argument
> >
> >When I run pccardc pccardmem <memadd> with any address larger than a
> 16 bit
> >value, the same error is reported. Upon inserting either cards, I
> received
> >the following message:
> >Mar 6 08:52:19 jupiter pccardd[39]: No card in database for
> >"(null)"("(null)")
> >Anyone seen this before or have any tips on what the problem is?
> >Upon inserting the Xircom card I receive the following:
> >pcic0: Card type 32-bit cardbus is unsupported
> >Is the Xircom card (cardbus) supported under FreeBSD 4.5?
> >
> >Entire dmesg attached for reference.
> >
> >Regards,
> >
> >Scott.
> >
> >Copyright (c) 1992-2002 The FreeBSD Project.
> >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> > The Regents of the University of California. All rights reserved.
> >FreeBSD 4.5-RELEASE #2: Wed Mar 6 08:46:44 EST 2002
> > root@jupiter.gennex.com.au:/usr/src/sys/compile/JUPITER
> >Timecounter "i8254" frequency 1193182 Hz
> >CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x68a Stepping = 10
> >
> >Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
> CMOV,
> >PAT,PSE36,MMX,FXSR,SSE>
> >real memory = 266797056 (260544K bytes)
> >avail memory = 256188416 (250184K bytes)
> >Preloaded elf kernel "kernel" at 0xc0360000.
> >Pentium Pro MTRR support enabled
> >Using $PIR table, 7 entries at 0xc00fdf50
> >npx0: <math processor> on motherboard
> >npx0: INT 16 interface
> >pcib0: <Host to PCI bridge> on motherboard
> >pci0: <PCI bus> on pcib0
> >pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 10
> >pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
> pci0
> >pci1: <PCI bus> on pcib1
> >pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.0 on pci1
> >pcic0: PCI Memory allocated: 0x44000000
> >pcic0: Warning: O2micro OZ68xx chips may not work
> >pccard0: <PC Card bus (classic)> on pcic0
> >pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.1 on pci1
> >pcic1: PCI Memory allocated: 0x44001000
> >pcic1: Warning: O2micro OZ68xx chips may not work
> >pccard1: <PC Card bus (classic)> on pcic1
> >isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on
> pci0
> >isa0: <ISA bus> on isab0
> >atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device
> 31.1
> >on
> >pci0
> >ata0: at 0x1f0 irq 14 on atapci0
> >ata1: at 0x170 irq 15 on atapci0
> >uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> 0x1820-0x183f
> >irq 5 at device 31.2 on pci0
> >usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> >usb0: USB revision 1.0
> >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >uhub0: 2 ports with 2 removable, self powered
> >pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
> >uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> 0x1880-0x189f
> >irq 5 at device 31.4 on pci0
> >usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> >usb1: USB revision 1.0
> >uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >uhub1: 2 ports with 2 removable, self powered
> >pcm0: <Intel 82801BA (ICH2)> port 0x1840-0x187f,0x1c00-0x1cff irq 5 at
> >device 31.5 on pci0
> >orm0: <Option ROMs> at iomem
> >0xc0000-0xcbfff,0xd0000-0xd3fff,0xd4000-0xd7fff
> >on isa0
> >fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0
> >fdc0: FIFO enabled, 8 bytes threshold
> >fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> >kbd0 at atkbd0
> >psm0: <PS/2 Mouse> irq 12 on atkbdc0
> >psm0: model IntelliMouse, device ID 3
> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> >sc0: <System console> at flags 0x100 on isa0
> >sc0: VGA <16 virtual consoles, flags=0x300>
> >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> >sio0: type 16550A
> >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> >ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> >ppc0: FIFO with 16/16/8 bytes threshold
> >lpt0: <Printer> on ppbus0
> >lpt0: Interrupt-driven port
> >ad0: 19077MB <HITACHI_DK23CA-20> [38760/16/63] at ata0-master UDMA100
> >acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master using PIO4
> >Mounting root from ufs:/dev/ad0s2a
> >pccard: card inserted, slot 0
> >pccard: card removed, slot 0
> >pcic0: Card type 32-bit cardbus is unsupported
> >swapon: adding /dev/ad0s2b as swap device
> >swapon: adding /dev/ad0s2e as swap device
> >Automatic boot in progress...
> >/dev/ad0s2a:
> >FILESYSTEM CLEAN; SKIPPING CHECKS
> >/dev/ad0s2a:
> >clean, 4371441 free
> >(13185 frags, 544782 blocks, 0.3% fragmentation)
> >Setup PC-CARD:
> >pccardc:
> >ioctl (PIOCRWMEM)
> >:
> >Invalid argument
> > beep
> > pccardd
> >.
> >Doing initial network setup:
> > hostname
> >.
> >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> > inet 127.0.0.1 netmask 0xff000000
> >Additional routing options:
> > TCP keepalive=YES
> >.
> >Routing daemons:
> >.
> >Additional daemons:
> > syslogd
> >.
> >Doing additional network setup:
> >.
> >Starting final network daemons:
> >.
> >ELF ldconfig path: /usr/lib /usr/lib/compat
> >a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
> >Starting standard daemons:
> > inetd
> > cron
> > sshd
> >.
> >Initial rc.i386 initialization:
> >.
> >Configuring syscons:
> > blanktime
> >.
> >Additional ABI support:
> >.
> >Local package initialization:
> >.
> >Additional TCP options:
> >.
> >
> >Wed Mar 6 08:50:33 EST 2002
> >Mar 6 08:50:49 jupiter login: ROOT LOGIN (root) ON ttyv1
> >pcic0: Card type 32-bit cardbus is unsupported
> >pccard: card inserted, slot 0
> >Mar 6 08:52:19 jupiter pccardd[39]: No card in database for
> >"(null)"("(null)")
> >pccard: card removed, slot 0
> >
> >
> >
> >
> >
> >
> >To Unsubscribe: send mail to majordomo@FreeBSD.org
> >with "unsubscribe freebsd-mobile" in the body of the message
>
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003b01c1c639$a0dd55a0$0128a8c0>