Date: Fri, 4 Jan 2013 20:24:30 +0100 From: Monthadar Al Jaberi <monthadar@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org, freebsd-mips@freebsd.org Subject: Re: ath0: could not map interrupt Message-ID: <CA%2BsBSoKSqODze7VxsP-vN1D93K=4YYy7mc3PUHvnuuO1zy32Sw@mail.gmail.com> In-Reply-To: <CAJ-Vmo=_rakJQu5o1E63BcC34t%2Bd36a75qBmaFYz1R4vveZ0EQ@mail.gmail.com> References: <CA%2BsBSoKs9s0SxAOyf91pcPv0MZMx3LCHh%2B_dTN-2mEQdYdH45g@mail.gmail.com> <CA%2BsBSo%2BpxqvWkrMjd8pmJSYUBdr0HuMW4eARJFcaFrG5tEYqBg@mail.gmail.com> <CAJ-Vmon%2BGzpXYkfE%2Bu7CDoXqmpH=zeJPcQdrukxAa9QH-2GazQ@mail.gmail.com> <CA%2BsBSoJg%2B%2BNo1ApSfUVnh1dDVgqEUPLpFJZPv3Ac%2BvaMno01sQ@mail.gmail.com> <CA%2BsBSoJY7AHjN=cMv6sfXHF4R0_z60c4q9BXEo20jCq6BJGEPg@mail.gmail.com> <CA%2BsBSoJgO6VWwc_43_SkThxG1ZcRh6iEJZdZ3yandNfEd8LNZw@mail.gmail.com> <CAJ-Vmon5pe4-7wN_0b46hyK-jiojaKC=7BWeCLH6L_viTsochg@mail.gmail.com> <CA%2BsBSoK519AFeHRXNPFozzmiToDW-dK%2B4NL-M-JDvpzrdEQkLw@mail.gmail.com> <CAJ-Vmo=_rakJQu5o1E63BcC34t%2Bd36a75qBmaFYz1R4vveZ0EQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 4, 2013 at 8:13 PM, Adrian Chadd <adrian@freebsd.org> wrote: > Ok. The magic you need to try hacking is in ar71xx_pci.c. There's the > 7 PCI windows and the 3 interrupt lines that are configured. > > The IRQ only gets unmasked when a slot claims it as a resource. So > you'll have to fiddle with that mapping a little. > > Look at ar71xx_pci_route_interrupt(). Maybe set it up so > AR71XX_PCI_BASE_SLOT is 18 instead of 17? Works!!! :D The slot is not the issue I think. The code seems to iterate through a couple, and when one fails it just checks the other. What it seems is wrong is that the interrupts are mapped wrong. Linux assigned IRQ 0 to slot 18, while FreeBSD assignes IRQ 1. We need a mapping just like openwrt. Code re-write? :D We need this: Slot 18 IRQ 0, Slot 19 IRQ 1, Slot 20 IRQ 2 I don't know really what "slots" are physcially. Does the PCI bridge have many slots (ports)? > > > > Adrian > > > On 4 January 2013 06:48, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >> Attached is two boot logs with debug on for resource manager of RB433AH >> and RSPRO respectively. Also attached boot log from openWRT as a >> reference (on RB433AH). >> >> I installed an ath(4) in first slot in each board according to the marki= ng on >> each PCB. You will notice that RB433AH starts from slot 18. >> >> I looked at openWRT and it seems they setup a special IRQ map for the RB= 4XX. >> For RSPRO they don't seem to do anything special, and use the generic ma= ppings >> of three IRQ and slots 17 to 19. >> While RB433AH lists the slots for the IRQ from slot 17 to 23. >> >> RB433AH: >> CPU platform: Atheros AR7161 rev 2 >> CPU Frequency=3D680 MHz >> CPU DDR Frequency=3D340 MHz >> CPU AHB Frequency=3D170 MHz >> platform frequency: 680000000 >> arguments: >> a0 =3D 00000008 >> a1 =3D a0871c00 >> a2 =3D 00000000 >> a3 =3D 00000000 >> Cmd line: console=3DttyS0,115200 gpio=3D4031 HZ=3D340000000 mem=3D128M >> kmac=3DD4:CA:6D:57:DC:D3 board=3D433 boot=3D1 mlc=3D2 >> Environment: >> envp is invalid >> Cache info: >> picache_stride =3D 4096 >> picache_loopcount =3D 16 >> pdcache_stride =3D 4096 >> pdcache_loopcount =3D 8 >> cpu0: MIPS Technologies processor v116.147 >> MMU: Standard TLB, 16 entries >> L1 i-cache: 4 ways of 512 sets, 32 bytes per line >> L1 d-cache: 4 ways of 256 sets, 32 bytes per line >> Config1=3D0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> >> Config3=3D0x20 >> KDB: debugger backends: ddb >> KDB: current backend: ddb >> Copyright (c) 1992-2013 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved= . >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 10.0-CURRENT #172: Fri Jan 4 16:40:48 CET 2013 >> root@mechy:/usr/obj/mips.mips/usr/src/sys/RB433AH_MFS mips >> WARNING: WITNESS option enabled, expect reduced performance. >> MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: >> MEMGUARD map base: 0xc0400000 >> MEMGUARD map limit: 0xc6a67000 >> MEMGUARD map size: 104860 KBytes >> real memory =3D 134217728 (131072K bytes) >> avail memory =3D 123133952 (117MB) >> random device not loaded; using insecure entropy >> wlan: mac acl policy registered >> rman_manage_region: <Hardware IRQs> request: start 0, end 0x5 >> rman_manage_region: <Memory addresses> request: start 0, end 0xffffffff >> nexus0: <MIPS32 root nexus> >> clock0: <Generic MIPS32 ticker> on nexus0 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x5, 0x5], >> length 0x1, flags 2, device clock0 >> considering [0, 0x5] >> truncated region: [0x5, 0x5]; size 0x1 (requested 0x1) >> candidate region: [0x5, 0x5], size 0x1 >> allocating at the end >> Timecounter "MIPS32" frequency 340000000 Hz quality 800 >> Event timer "MIPS32" frequency 340000000 Hz quality 800 >> apb0 at irq 4 on nexus0 >> rman_manage_region: <APB memory window> request: start 0x18000000, end >> 0x1dffffff >> rman_manage_region: <APB IRQ> request: start 0, end 0x7 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x4, 0x4], >> length 0x1, flags 6, device apb0 >> considering [0, 0x4] >> truncated region: [0x4, 0x4]; size 0x1 (requested 0x1) >> candidate region: [0x4, 0x4], size 0x1 >> allocating at the end >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> uart0: <16550 or compatible> on apb0 >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> rman_reserve_resource_bound: <APB IRQ> request: [0x3, 0x3], length >> 0x1, flags 6, device uart0 >> considering [0, 0x7] >> truncated region: [0x3, 0x3]; size 0x1 (requested 0x1) >> candidate region: [0x3, 0x3], size 0x1 >> splitting region in three parts: [0, 0x2]; [0x3, 0x3]; [0x4, 0x7] >> uart0: console (115200,n,8,1) >> ehci0: <AR71XX Integrated USB 2.0 controller> at mem >> 0x1b000000-0x1bffffff irq 1 on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x1b000000, >> 0x1bffffff], length 0x1000000, flags 2, device ehci0 >> considering [0, 0xffffffff] >> truncated region: [0x1b000000, 0x1bffffff]; size 0x1000000 (requested 0x= 1000000) >> candidate region: [0x1b000000, 0x1bffffff], size 0x1000000 >> splitting region in three parts: [0, 0x1affffff]; [0x1b000000, >> 0x1bffffff]; [0x1c000000, 0xffffffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x1, 0x1], >> length 0x1, flags 2, device ehci0 >> considering [0, 0x3] >> truncated region: [0x1, 0x1]; size 0x1 (requested 0x1) >> candidate region: [0x1, 0x1], size 0x1 >> splitting region in three parts: [0, 0]; [0x1, 0x1]; [0x2, 0x3] >> usbus0: set host controller mode >> usbus0: EHCI version 1.0 >> usbus0: set host controller mode >> usbus0 on ehci0 >> pcib0 at irq 0 on nexus0 >> rman_manage_region: <ar71xx PCI memory window> request: start >> 0x10000000, end 0x16ffffff >> rman_manage_region: <ar71xx PCI IRQs> request: start 0, end 0x2 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0, 0], length >> 0x1, flags 6, device pcib0 >> considering [0, 0] >> truncated region: [0, 0]; size 0x1 (requested 0x1) >> candidate region: [0, 0], size 0x1 >> candidate region is entire chunk >> pci0: <PCI bus> on pcib0 >> ath0: <Atheros 5413> irq 1 at device 18.0 on pci0 >> rman_reserve_resource_bound: <ar71xx PCI memory window> request: [0, >> 0xffffffff], length 0x10000, flags 16384, device ath0 >> considering [0x10000000, 0x16ffffff] >> truncated region: [0x10000000, 0x16ffffff]; size 0x7000000 (requested 0x= 10000) >> candidate region: [0x10000000, 0x16ffffff], size 0x7000000 >> allocating from the beginning >> rman_reserve_resource_bound: <ar71xx PCI IRQs> request: [0x1, 0x1], >> length 0x1, flags 6, device ath0 >> considering [0, 0x2] >> truncated region: [0x1, 0x1]; size 0x1 (requested 0x1) >> candidate region: [0x1, 0x1], size 0x1 >> splitting region in three parts: [0, 0]; [0x1, 0x1]; [0x2, 0x2] >> ath0: AR5413 mac 10.5 RF5413 phy 6.1 >> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 >> arge0: <Atheros AR71xx built-in ethernet interface> at mem >> 0x19000000-0x19000fff irq 2 on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x19000000, >> 0x19000fff], length 0x1000, flags 6, device arge0 >> considering [0, 0x1affffff] >> truncated region: [0x19000000, 0x19000fff]; size 0x1000 (requested 0x100= 0) >> candidate region: [0x19000000, 0x19000fff], size 0x1000 >> splitting region in three parts: [0, 0x18ffffff]; [0x19000000, >> 0x19000fff]; [0x19001000, 0x1affffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x2, 0x2], >> length 0x1, flags 6, device arge0 >> considering [0x2, 0x3] >> truncated region: [0x2, 0x2]; size 0x1 (requested 0x1) >> candidate region: [0x2, 0x2], size 0x1 >> allocating from the beginning >> arge0: finishing attachment, phymask 0010, proxy null >> miibus0: <MII bus> on arge0 >> ukphy1: <Generic IEEE 802.3u media interface> PHY 4 on miibus0 >> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> arge0: Ethernet address: d4:ca:6d:57:dc:d4 >> arge1: <Atheros AR71xx built-in ethernet interface> at mem >> 0x1a000000-0x1a000fff irq 3 on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x1a000000, >> 0x1a000fff], length 0x1000, flags 6, device arge1 >> considering [0x19001000, 0x1affffff] >> truncated region: [0x1a000000, 0x1a000fff]; size 0x1000 (requested 0x100= 0) >> candidate region: [0x1a000000, 0x1a000fff], size 0x1000 >> splitting region in three parts: [0x19001000, 0x19ffffff]; >> [0x1a000000, 0x1a000fff]; [0x1a001000, 0x1affffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x3, 0x3], >> length 0x1, flags 6, device arge1 >> considering [0x3, 0x3] >> truncated region: [0x3, 0x3]; size 0x1 (requested 0x1) >> candidate region: [0x3, 0x3], size 0x1 >> candidate region is entire chunk >> arge1: finishing attachment, phymask 0000, proxy null >> arge1: Ethernet address: d4:ca:6d:57:dc:d3 >> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x1f000000, >> 0x1f00000f], length 0x10, flags 2, device spi0 >> considering [0x1c000000, 0xffffffff] >> truncated region: [0x1f000000, 0x1f00000f]; size 0x10 (requested 0x10) >> candidate region: [0x1f000000, 0x1f00000f], size 0x10 >> splitting region in three parts: [0x1c000000, 0x1effffff]; >> [0x1f000000, 0x1f00000f]; [0x1f000010, 0xffffffff] >> spibus0: <spibus bus> on spi0 >> mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 >> Unknown SPI flash device. Vendor: ef, device id: 3011 >> device_attach: mx25l0 attach returned 6 >> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >> Timecounters tick every 1.000 msec >> usbus0: 480Mbps High Speed USB v2.0 >> bootpc_init: wired to interface 'arge1' >> Sending DHCP Discover packet from interface arge1 (d4:ca:6d:57:dc:d3) >> >> >> >> RSPRO: >> CPU platform: Atheros AR7161 rev 2 >> CPU Frequency=3D720 MHz >> CPU DDR Frequency=3D360 MHz >> CPU AHB Frequency=3D180 MHz >> platform frequency: 720000000 >> arguments: >> a0 =3D 00000002 >> a1 =3D 80050028 >> a2 =3D 80050000 >> a3 =3D 0000000a >> Cmd line: =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD = =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF= =BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD=EF=BF= =BD=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF= =BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF= =BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD >> Environment: >> memsize =3D 0x08000000 >> modetty0 =3D 0,n,8,1,hw >> ethaddr =3D 00.15.6d.c8.c9.2c >> board =3D RouterStation PRO >> Cache info: >> picache_stride =3D 4096 >> picache_loopcount =3D 16 >> pdcache_stride =3D 4096 >> pdcache_loopcount =3D 8 >> cpu0: MIPS Technologies processor v116.147 >> MMU: Standard TLB, 16 entries >> L1 i-cache: 4 ways of 512 sets, 32 bytes per line >> L1 d-cache: 4 ways of 256 sets, 32 bytes per line >> Config1=3D0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> >> Config3=3D0x20 >> KDB: debugger backends: ddb >> KDB: current backend: ddb >> Copyright (c) 1992-2013 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved= . >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 10.0-CURRENT #9: Fri Jan 4 16:52:15 CET 2013 >> root@mechy:/usr/obj/mips.mips/usr/src/sys/RSPRO_NFS mips >> WARNING: WITNESS option enabled, expect reduced performance. >> MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: >> MEMGUARD map base: 0xc0400000 >> MEMGUARD map limit: 0xc6a67000 >> MEMGUARD map size: 104860 KBytes >> real memory =3D 134217728 (131072K bytes) >> avail memory =3D 122871808 (117MB) >> random device not loaded; using insecure entropy >> rman_manage_region: <Hardware IRQs> request: start 0, end 0x5 >> rman_manage_region: <Memory addresses> request: start 0, end 0xffffffff >> nexus0: <MIPS32 root nexus> >> clock0: <Generic MIPS32 ticker> on nexus0 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x5, 0x5], >> length 0x1, flags 2, device clock0 >> considering [0, 0x5] >> truncated region: [0x5, 0x5]; size 0x1 (requested 0x1) >> candidate region: [0x5, 0x5], size 0x1 >> allocating at the end >> Timecounter "MIPS32" frequency 360000000 Hz quality 800 >> Event timer "MIPS32" frequency 360000000 Hz quality 800 >> apb0 at irq 4 on nexus0 >> rman_manage_region: <APB memory window> request: start 0x18000000, end >> 0x1dffffff >> rman_manage_region: <APB IRQ> request: start 0, end 0x7 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x4, 0x4], >> length 0x1, flags 6, device apb0 >> considering [0, 0x4] >> truncated region: [0x4, 0x4]; size 0x1 (requested 0x1) >> candidate region: [0x4, 0x4], size 0x1 >> allocating at the end >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> uart0: <16550 or compatible> on apb0 >> rman_reserve_resource_bound: <APB memory window> request: [0x18020003, >> 0x1802001a], length 0x18, flags 2, device uart0 >> considering [0x18000000, 0x1dffffff] >> truncated region: [0x18020003, 0x1802001a]; size 0x18 (requested 0x18) >> candidate region: [0x18020003, 0x1802001a], size 0x18 >> splitting region in three parts: [0x18000000, 0x18020002]; >> [0x18020003, 0x1802001a]; [0x1802001b, 0x1dffffff] >> rman_reserve_resource_bound: <APB IRQ> request: [0x3, 0x3], length >> 0x1, flags 6, device uart0 >> considering [0, 0x7] >> truncated region: [0x3, 0x3]; size 0x1 (requested 0x1) >> candidate region: [0x3, 0x3], size 0x1 >> splitting region in three parts: [0, 0x2]; [0x3, 0x3]; [0x4, 0x7] >> uart0: console (115200,n,8,1) >> gpio0: <Atheros AR71XX GPIO driver> on apb0 >> rman_reserve_resource_bound: <APB memory window> request: [0x18040000, >> 0x18040fff], length 0x1000, flags 2, device gpio0 >> considering [0x1802001b, 0x1dffffff] >> truncated region: [0x18040000, 0x18040fff]; size 0x1000 (requested 0x100= 0) >> candidate region: [0x18040000, 0x18040fff], size 0x1000 >> splitting region in three parts: [0x1802001b, 0x1803ffff]; >> [0x18040000, 0x18040fff]; [0x18041000, 0x1dffffff] >> rman_reserve_resource_bound: <APB IRQ> request: [0x2, 0x2], length >> 0x1, flags 6, device gpio0 >> considering [0, 0x2] >> truncated region: [0x2, 0x2]; size 0x1 (requested 0x1) >> candidate region: [0x2, 0x2], size 0x1 >> allocating at the end >> gpio0: [GIANT-LOCKED] >> gpio0: function_set: 0x0 >> gpio0: function_clear: 0x0 >> gpio0: gpio pinmask=3D0xff >> gpioc0: <GPIO controller> on gpio0 >> gpiobus0: <GPIO bus> on gpio0 >> gpioled0: <GPIO led> at pin(s) 2 on gpiobus0 >> ehci0: <AR71XX Integrated USB 2.0 controller> at mem >> 0x1b000000-0x1bffffff irq 1 on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x1b000000, >> 0x1bffffff], length 0x1000000, flags 2, device ehci0 >> considering [0, 0xffffffff] >> truncated region: [0x1b000000, 0x1bffffff]; size 0x1000000 (requested 0x= 1000000) >> candidate region: [0x1b000000, 0x1bffffff], size 0x1000000 >> splitting region in three parts: [0, 0x1affffff]; [0x1b000000, >> 0x1bffffff]; [0x1c000000, 0xffffffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x1, 0x1], >> length 0x1, flags 2, device ehci0 >> considering [0, 0x3] >> truncated region: [0x1, 0x1]; size 0x1 (requested 0x1) >> candidate region: [0x1, 0x1], size 0x1 >> splitting region in three parts: [0, 0]; [0x1, 0x1]; [0x2, 0x3] >> usbus0: set host controller mode >> usbus0: EHCI version 1.0 >> usbus0: set host controller mode >> usbus0 on ehci0 >> pcib0 at irq 0 on nexus0 >> rman_manage_region: <ar71xx PCI memory window> request: start >> 0x10000000, end 0x16ffffff >> rman_manage_region: <ar71xx PCI IRQs> request: start 0, end 0x2 >> rman_reserve_resource_bound: <Hardware IRQs> request: [0, 0], length >> 0x1, flags 6, device pcib0 >> considering [0, 0] >> truncated region: [0, 0]; size 0x1 (requested 0x1) >> candidate region: [0, 0], size 0x1 >> candidate region is entire chunk >> pci0: <PCI bus> on pcib0 >> ath0: <Atheros 5413> irq 0 at device 17.0 on pci0 >> rman_reserve_resource_bound: <ar71xx PCI memory window> request: [0, >> 0xffffffff], length 0x10000, flags 16384, device ath0 >> considering [0x10000000, 0x16ffffff] >> truncated region: [0x10000000, 0x16ffffff]; size 0x7000000 (requested 0x= 10000) >> candidate region: [0x10000000, 0x16ffffff], size 0x7000000 >> allocating from the beginning >> rman_reserve_resource_bound: <ar71xx PCI IRQs> request: [0, 0], length >> 0x1, flags 6, device ath0 >> considering [0, 0x2] >> truncated region: [0, 0]; size 0x1 (requested 0x1) >> candidate region: [0, 0], size 0x1 >> allocating from the beginning >> ath0: AR5413 mac 10.5 RF5413 phy 6.1 >> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 >> arge0: <Atheros AR71xx built-in ethernet interface> at mem >> 0x19000000-0x19000fff irq 2 on nexus0 >> arge0: arge_attach: overriding MII mode to 'RGMII' >> rman_reserve_resource_bound: <Memory addresses> request: [0x19000000, >> 0x19000fff], length 0x1000, flags 6, device arge0 >> considering [0, 0x1affffff] >> truncated region: [0x19000000, 0x19000fff]; size 0x1000 (requested 0x100= 0) >> candidate region: [0x19000000, 0x19000fff], size 0x1000 >> splitting region in three parts: [0, 0x18ffffff]; [0x19000000, >> 0x19000fff]; [0x19001000, 0x1affffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x2, 0x2], >> length 0x1, flags 6, device arge0 >> considering [0x2, 0x3] >> truncated region: [0x2, 0x2]; size 0x1 (requested 0x1) >> candidate region: [0x2, 0x2], size 0x1 >> allocating from the beginning >> arge0: finishing attachment, phymask 0010, proxy null >> miibus0: <MII bus> on arge0 >> ukphy0: <Generic IEEE 802.3u media interface> PHY 4 on miibus0 >> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >> arge0: Ethernet address: 00:15:6d:c8:c9:2c >> arge1: <Atheros AR71xx built-in ethernet interface> at mem >> 0x1a000000-0x1a000fff irq 3 on nexus0 >> arge1: arge_attach: overriding MII mode to 'RGMII' >> rman_reserve_resource_bound: <Memory addresses> request: [0x1a000000, >> 0x1a000fff], length 0x1000, flags 6, device arge1 >> considering [0x19001000, 0x1affffff] >> truncated region: [0x1a000000, 0x1a000fff]; size 0x1000 (requested 0x100= 0) >> candidate region: [0x1a000000, 0x1a000fff], size 0x1000 >> splitting region in three parts: [0x19001000, 0x19ffffff]; >> [0x1a000000, 0x1a000fff]; [0x1a001000, 0x1affffff] >> rman_reserve_resource_bound: <Hardware IRQs> request: [0x3, 0x3], >> length 0x1, flags 6, device arge1 >> considering [0x3, 0x3] >> truncated region: [0x3, 0x3]; size 0x1 (requested 0x1) >> candidate region: [0x3, 0x3], size 0x1 >> candidate region is entire chunk >> arge1: finishing attachment, phymask 0000, proxy null >> arge1: Ethernet address: 00:15:6d:c8:c9:2d >> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >> rman_reserve_resource_bound: <Memory addresses> request: [0x1f000000, >> 0x1f00000f], length 0x10, flags 2, device spi0 >> considering [0x1c000000, 0xffffffff] >> truncated region: [0x1f000000, 0x1f00000f]; size 0x10 (requested 0x10) >> candidate region: [0x1f000000, 0x1f00000f], size 0x10 >> splitting region in three parts: [0x1c000000, 0x1effffff]; >> [0x1f000000, 0x1f00000f]; [0x1f000010, 0xffffffff] >> spibus0: <spibus bus> on spi0 >> mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 >> mx25l0: mx25ll128, sector 65536 bytes, 256 sectors >> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >> Timecounters tick every 1.000 msec >> usbus0: 480Mbps High Speed USB v2.0 >> ugen0.1: <Atheros> at usbus0 >> uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbu= s0 >> g_dev_taste: make_dev_p() failed (gp->name=3Dredboot/RedBoot config, err= or=3D22) >> g_dev_taste: make_dev_p() failed (gp->name=3Dredboot/FIS directory, erro= r=3D22) >> bootpc_init: wired to interface 'arge0' >> Sending DHCP Discover packet from interface arge0 (00:15:6d:c8:c9:2c) >> >> OpenWRT: >> [ 0.000000] Linux version 3.3.8 (monthadar.aljaberi@bane) (gcc >> version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #5 Fri >> Dec 21 16:41:32 CET 2012 >> [ 0.000000] bootconsole [early0] enabled >> [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) >> [ 0.000000] SoC: Atheros AR7161 rev 2 >> [ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, >> Ref:40.000MHz >> [ 0.000000] Determined physical RAM map: >> [ 0.000000] memory: 08000000 @ 00000000 (usable) >> [ 0.000000] User-defined physical RAM map: >> [ 0.000000] memory: 08000000 @ 00000000 (usable) >> [ 0.000000] Initrd not found or empty - disabling initrd >> [ 0.000000] Zone PFN ranges: >> [ 0.000000] Normal 0x00000000 -> 0x00008000 >> [ 0.000000] Movable zone start PFN for each node >> [ 0.000000] Early memory PFN ranges >> [ 0.000000] 0: 0x00000000 -> 0x00008000 >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> Total pages: 32512 >> [ 0.000000] Kernel command line: console=3DttyS0,115200 gpio=3D4031 >> HZ=3D340000000 mem=3D128M kmac=3DD4:CA:6D:57:DC:D3 board=3D433 boot=3D1 = mlc=3D2 >> rootfstype=3Dyaffs noinitrd >> [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) >> [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 b= ytes) >> [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 byt= es) >> [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 = bytes. >> [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, >> linesize 32 bytes >> [ 0.000000] Writing ErrCtl register=3D00000080 >> [ 0.000000] Readback ErrCtl register=3D00000080 >> [ 0.000000] Memory: 125360k/131072k available (2063k kernel code, >> 5712k reserved, 417k data, 1468k init, 0k highmem) >> [ 0.000000] SLUB: Genslabs=3D9, HWalign=3D32, Order=3D0-3, MinObjects= =3D0, >> CPUs=3D1, Nodes=3D1 >> [ 0.000000] NR_IRQS:51 >> [ 0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=3D2260992) >> [ 0.060000] pid_max: default: 32768 minimum: 301 >> [ 0.060000] Mount-cache hash table entries: 512 >> [ 0.070000] NET: Registered protocol family 16 >> [ 0.070000] gpiochip_add: registered GPIOs 0 to 15 on device: ath79 >> [ 0.080000] MIPS: machine is MikroTik RouterBOARD 433/AH >> [ 0.780000] registering PCI controller with io_map_base unset >> [ 0.790000] bio: create slab <bio-0> at 0 >> [ 0.800000] PCI host bridge to bus 0000:00 >> [ 0.800000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ff= ffff] >> [ 0.810000] pci_bus 0000:00: root bus resource [io 0x0000] >> [ 0.810000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x1000f= fff] >> [ 0.820000] pci 0000:00:12.0: using irq 40 for pin 1 >> [ 0.820000] Switching to clocksource MIPS >> [ 0.830000] NET: Registered protocol family 2 >> [ 0.830000] IP route cache hash table entries: 1024 (order: 0, 4096 b= ytes) >> [ 0.830000] TCP established hash table entries: 4096 (order: 3, 32768= bytes) >> [ 0.840000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >> [ 0.840000] TCP: Hash tables configured (established 4096 bind 4096) >> [ 0.850000] TCP reno registered >> [ 0.850000] UDP hash table entries: 256 (order: 0, 4096 bytes) >> [ 0.860000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >> [ 0.860000] NET: Registered protocol family 1 >> [ 2.330000] msgmni has been set to 244 >> [ 2.330000] io scheduler noop registered >> [ 2.340000] io scheduler deadline registered (default) >> [ 2.340000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled >> [ 2.370000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq =3D 11) is a = 16550A >> [ 2.370000] console [ttyS0] enabled, bootconsole disabled >> [ 2.370000] console [ttyS0] enabled, bootconsole disabled >> [ 2.390000] gpiochip_add: registered GPIOs 32 to 40 on device: spi-rb= 4xx-cpld >> [ 2.390000] m25p80 spi0.0: pm25lv512 (64 Kbytes) >> [ 2.400000] Creating 4 MTD partitions on "spi0.0": >> [ 2.400000] 0x000000000000-0x00000000b000 : "routerboot" >> [ 2.410000] 0x00000000b000-0x00000000c000 : "hard_config" >> [ 2.420000] 0x00000000d000-0x00000000f000 : "bios" >> [ 2.420000] 0x00000000f000-0x000000010000 : "soft_config" >> [ 2.430000] NAND flash driver for RouterBoard 4xx series version 0.2.= 0 >> [ 2.440000] NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 >> (Samsung NAND 64MiB 3,3V 8-bit) >> [ 2.450000] Scanning device for bad blocks >> [ 2.610000] Bad eraseblock 947 at 0x000000ecc000 >> [ 2.640000] Bad eraseblock 1093 at 0x000001114000 >> [ 2.690000] Bad eraseblock 1353 at 0x000001524000 >> [ 2.730000] Bad eraseblock 1565 at 0x000001874000 >> [ 2.740000] Bad eraseblock 1566 at 0x000001878000 >> [ 2.860000] Bad eraseblock 2261 at 0x000002354000 >> [ 2.860000] Bad eraseblock 2262 at 0x000002358000 >> [ 2.870000] Bad eraseblock 2277 at 0x000002394000 >> [ 2.880000] Bad eraseblock 2278 at 0x000002398000 >> [ 2.880000] Bad eraseblock 2279 at 0x00000239c000 >> [ 2.890000] Bad eraseblock 2280 at 0x0000023a0000 >> [ 2.890000] Bad eraseblock 2283 at 0x0000023ac000 >> [ 2.900000] Bad eraseblock 2284 at 0x0000023b0000 >> [ 2.900000] Bad eraseblock 2286 at 0x0000023b8000 >> [ 2.910000] Bad eraseblock 2288 at 0x0000023c0000 >> [ 2.910000] Bad eraseblock 2289 at 0x0000023c4000 >> [ 2.920000] Bad eraseblock 2291 at 0x0000023cc000 >> [ 2.920000] Bad eraseblock 2293 at 0x0000023d4000 >> [ 2.920000] Bad eraseblock 2294 at 0x0000023d8000 >> [ 2.930000] Bad eraseblock 2299 at 0x0000023ec000 >> [ 2.940000] Bad eraseblock 2300 at 0x0000023f0000 >> [ 2.940000] Bad eraseblock 2303 at 0x0000023fc000 >> [ 2.950000] Bad eraseblock 2306 at 0x000002408000 >> [ 2.950000] Bad eraseblock 2307 at 0x00000240c000 >> [ 2.950000] Bad eraseblock 2308 at 0x000002410000 >> [ 2.960000] Bad eraseblock 2309 at 0x000002414000 >> [ 2.970000] Bad eraseblock 2335 at 0x00000247c000 >> [ 2.970000] Bad eraseblock 2336 at 0x000002480000 >> [ 2.980000] Bad eraseblock 2355 at 0x0000024cc000 >> [ 3.000000] Bad eraseblock 2429 at 0x0000025f4000 >> [ 3.000000] Bad eraseblock 2433 at 0x000002604000 >> [ 3.010000] Bad eraseblock 2436 at 0x000002610000 >> [ 3.010000] Bad eraseblock 2439 at 0x00000261c000 >> [ 3.020000] Bad eraseblock 2442 at 0x000002628000 >> [ 3.020000] Bad eraseblock 2443 at 0x00000262c000 >> [ 3.030000] Bad eraseblock 2446 at 0x000002638000 >> [ 3.030000] Bad eraseblock 2449 at 0x000002644000 >> [ 3.040000] Bad eraseblock 2453 at 0x000002654000 >> [ 3.040000] Bad eraseblock 2456 at 0x000002660000 >> [ 3.050000] Bad eraseblock 2457 at 0x000002664000 >> [ 3.050000] Bad eraseblock 2459 at 0x00000266c000 >> [ 3.060000] Bad eraseblock 2462 at 0x000002678000 >> [ 3.060000] Bad eraseblock 2465 at 0x000002684000 >> [ 3.070000] Bad eraseblock 2468 at 0x000002690000 >> [ 3.070000] Bad eraseblock 2470 at 0x000002698000 >> [ 3.080000] Bad eraseblock 2473 at 0x0000026a4000 >> [ 3.080000] Bad eraseblock 2475 at 0x0000026ac000 >> [ 3.090000] Bad eraseblock 2476 at 0x0000026b0000 >> [ 3.250000] Bad eraseblock 3371 at 0x0000034ac000 >> [ 3.380000] Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit": >> [ 3.380000] 0x000000000000-0x000000040000 : "booter" >> [ 3.390000] 0x000000040000-0x000000400000 : "kernel" >> [ 3.390000] 0x000000400000-0x000004000000 : "rootfs" >> [ 3.400000] mtd: partition "rootfs" set to be root filesystem >> [ 3.410000] split_squashfs: no squashfs found in "NAND 64MiB 3,3V 8-b= it" >> [ 3.420000] IP17xx: Found IP175D at ag71xx-mdio.0:00 >> [ 3.420000] ag71xx_mdio: probed >> [ 3.430000] eth0: Atheros AG71xx at 0xba000000, irq 5 >> [ 3.730000] ag71xx ag71xx.1: eth0: connected to PHY at >> ag71xx-mdio.0:04 [uid=3D02430d80, driver=3DGeneric PHY] >> [ 3.740000] eth1: Atheros AG71xx at 0xb9000000, irq 4 >> [ 4.060000] ag71xx ag71xx.0: eth1: connected to PHY at >> ag71xx-mdio.0:00 [uid=3D02430d80, driver=3DIC+ IP17xx] >> [ 4.070000] TCP cubic registered >> [ 4.070000] NET: Registered protocol family 17 >> [ 4.070000] 8021q: 802.1Q VLAN Support v1.8 >> [ 4.080000] Freeing unused kernel memory: 1468k freed >> - preinit - >> Press the [f] key and hit [enter] to enter failsafe mode >> [ 5.730000] eth0: link up (100Mbps/Full duplex) >> - regular preinit - >> [ 7.700000] eth0: link down >> - init - >> [ 7.870000] Compat-drivers backport release: >> compat-drivers-2012-09-04-2-gddac993 >> [ 7.880000] Backport based on wireless-testing.git master-2012-09-07 >> [ 7.890000] compat.git: wireless-testing.git >> [ 7.910000] cfg80211: Calling CRDA to update world regulatory domain >> [ 7.910000] cfg80211: World regulatory domain updated: >> [ 7.920000] cfg80211: (start_freq - end_freq @ bandwidth), >> (max_antenna_gain, max_eirp) >> [ 7.930000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 7.930000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), >> (300 mBi, 2000 mBm) >> [ 7.940000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), >> (300 mBi, 2000 mBm) >> [ 7.950000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 7.960000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 8.030000] PCI: Enabling device 0000:00:12.0 (0000 -> 0002) >> [ 8.040000] ath5k 0000:00:12.0: registered as 'phy0' >> [ 8.690000] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0= x61) >> [ 8.690000] cfg80211: Calling CRDA for country: US >> [ 8.700000] cfg80211: Regulatory domain changed to country: US >> [ 8.700000] cfg80211: (start_freq - end_freq @ bandwidth), >> (max_antenna_gain, max_eirp) >> [ 8.710000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), >> (300 mBi, 2700 mBm) >> [ 8.720000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), >> (300 mBi, 1700 mBm) >> [ 8.730000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 8.740000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 8.740000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), >> (300 mBi, 2000 mBm) >> [ 8.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), >> (300 mBi, 3000 mBm) >> [ 8.790000] PPP generic driver version 2.4.2 >> [ 8.820000] ip_tables: (C) 2000-2006 Netfilter Core Team >> [ 8.900000] NET: Registered protocol family 24 >> [ 8.910000] nf_conntrack version 0.5.0 (1981 buckets, 7924 max) >> >> Please press Enter to activate this console. [ 10.870000] device >> eth1 entered promiscuous mode >> [ 12.060000] eth1: link up (100Mbps/Full duplex) >> [ 12.060000] br-lan: port 1(eth1) entered forwarding state >> [ 12.070000] br-lan: port 1(eth1) entered forwarding state >> [ 12.760000] eth0: link up (100Mbps/Full duplex) >> [ 14.070000] br-lan: port 1(eth1) entered forwarding state >> >> >> On Fri, Jan 4, 2013 at 5:59 AM, Adrian Chadd <adrian@freebsd.org> wrote: >>> ... wow. How the hell is that happening?! >>> >>> >>> >>> >>> Adrian >>> >>> >>> On 3 January 2013 20:54, Monthadar Al Jaberi <monthadar@gmail.com> wrot= e: >>>> Maybe this is the root of the problem. >>>> >>>> On RSPRO the PCI start slot enumerating from 17. While RB433AH start >>>> from 18. That can explain why Slot 20 of RB433AH won't even attach >>>> (AR7161 only has 3 slots, slot 17 to 19). That can also explain why I >>>> get device_timeout on slot 18 and 19 cause they are miss aligned. And >>>> don't see any interrupts from ath(4) when enabling interrupt >>>> debugging. >>>> >>>> I will keep digging into why they won't start enumerating correct. >>>> >>>> br, >>>> >>>> On Fri, Jan 4, 2013 at 2:28 AM, Monthadar Al Jaberi <monthadar@gmail.c= om> wrote: >>>>> Hi, >>>>> >>>>> I am wondering if anyone can confirm that any ath5k (preferably >>>>> AR5413) series miniPCI wifi works on RB433/AH/UAH. >>>>> >>>>> Thank you in advance >>>>> >>>>> On Wed, Jan 2, 2013 at 10:29 PM, Monthadar Al Jaberi >>>>> <monthadar@gmail.com> wrote: >>>>>> On Wed, Jan 2, 2013 at 9:43 PM, Adrian Chadd <adrian@freebsd.org> wr= ote: >>>>>>> ... sounds like a definite interrupt routing issue. >>>>>>> >>>>>>> Who's been knee deep in the interrupt handling code in MIPS lately?= Grrr. >>>>>>> I know there's been some FDT work in MIPS and that's touched some >>>>>>> interrupt code.. maybe that's interfering? >>>>>> >>>>>> I am not sure, I just re-compiled my kernel for RSPRO and it seems t= o work. >>>>>> >>>>>> I install openwrt on rb433ah and ath0 associated ok. and I could pin= g >>>>>> between RSPRO(FreeBSD) and RB433AH(Openwrt). RSPRO and non working >>>>>> RB433AH running same kernel r243866. >>>>>> >>>>>> Attached is my kernel config & hints. ( I am "playing around" with t= he >>>>>> ar71xx_spi but that should not effect the pci code, I hope). >>>>>> >>>>>> # >>>>>> # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 7= 1xx systems >>>>>> # >>>>>> # This includes all the common drivers for the AR71XX boards along w= ith >>>>>> # the usb, net80211 and atheros driver code. >>>>>> # >>>>>> # $FreeBSD$ >>>>>> # >>>>>> >>>>>> machine mips mips >>>>>> ident RB433AH_MFS >>>>>> cpu CPU_MIPS4KC >>>>>> makeoptions KERNLOADADDR=3D0x80050000 >>>>>> options HZ=3D1000 >>>>>> options HWPMC_HOOKS >>>>>> >>>>>> files "../atheros/files.ar71xx" >>>>>> >>>>>> # For now, hints are per-board. >>>>>> >>>>>> hints "RB433AH.hints" >>>>>> >>>>>> makeoptions DEBUG=3D-g #Build kernel with gdb(1) = debug symbols >>>>>> >>>>>> # Build these as modules so small platform builds will have the >>>>>> # modules already built. >>>>>> makeoptions MODULES_OVERRIDE=3D"random gpio ar71xx if_gif if_gre >>>>>> if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip >>>>>> wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci" >>>>>> >>>>>> options DDB >>>>>> options KDB >>>>>> >>>>>> options SCHED_4BSD #4BSD scheduler >>>>>> options INET #InterNETworking >>>>>> #options INET6 # IPv6 >>>>>> >>>>>> # options NFS_CL #Network Filesystem Client >>>>>> >>>>>> options PSEUDOFS #Pseudo-filesystem framework >>>>>> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-tim= e extensions >>>>>> >>>>>> # options NFS_LEGACYRPC >>>>>> # Debugging for use in -current >>>>>> options INVARIANTS >>>>>> options INVARIANT_SUPPORT >>>>>> options WITNESS >>>>>> options WITNESS_SKIPSPIN >>>>>> options DEBUG_REDZONE >>>>>> options DEBUG_MEMGUARD >>>>>> >>>>>> options FFS #Berkeley Fast Filesystem >>>>>> # options SOFTUPDATES #Enable FFS soft updates s= upport >>>>>> # options UFS_ACL #Support for access contro= l lists >>>>>> # options UFS_DIRHASH #Improve performance on bi= g >>>>>> directories >>>>>> # options MSDOSFS # Read MSDOS filesys= tems; useful for USB/CF >>>>>> >>>>>> device pci >>>>>> device ar71xx_pci >>>>>> >>>>>> # RTC - requires hackery in the spibus code to work >>>>>> device pcf2123_rtc >>>>>> >>>>>> # GEOM modules >>>>>> device geom_redboot # to get access to the SPI flash par= titions >>>>>> device geom_uzip # compressed in-memory filesystem ha= ckery! >>>>>> device geom_map >>>>>> options GEOM_UZIP >>>>>> >>>>>> # NANDFS >>>>>> options NANDFS >>>>>> >>>>>> ## Boot from the first MFS uzip >>>>>> #options ROOTDEVNAME=3D\"ufs:md0.uzip\" >>>>>> #options MD_ROOT >>>>>> #options MD_ROOT_SIZE=3D"9000" >>>>>> >>>>>> # Boot from NFS >>>>>> options NFSLOCKD #Network Lock Manager >>>>>> options NFSCLIENT #Network Filesystem Client >>>>>> options NFS_ROOT >>>>>> >>>>>> options BOOTP >>>>>> options BOOTP_NFSROOT >>>>>> options BOOTP_NFSV3 >>>>>> options BOOTP_WIRED_TO=3Darge1 >>>>>> options BOOTP_COMPAT >>>>>> options ROOTDEVNAME=3D\"nfs:172.16.0.101:/usr/obj/rb433ah/nf= s\" >>>>>> >>>>>> >>>>>> # 802.11 framework >>>>>> options IEEE80211_DEBUG >>>>>> options IEEE80211_ALQ >>>>>> options IEEE80211_SUPPORT_MESH >>>>>> # This option is currently broken for if_ath_tx. >>>>>> options IEEE80211_SUPPORT_TDMA >>>>>> options IEEE80211_AMPDU_AGE >>>>>> device wlan # 802.11 support >>>>>> device wlan_wep # 802.11 WEP support >>>>>> device wlan_ccmp # 802.11 CCMP support >>>>>> device wlan_tkip # 802.11 TKIP support >>>>>> device wlan_xauth # 802.11 hostap support >>>>>> device wlan_acl # 802.11 ACL support >>>>>> >>>>>> # Atheros wireless NICs >>>>>> device ath # Atheros interface support >>>>>> device ath_pci # Atheros PCI/Cardbus bus >>>>>> options ATH_DEBUG >>>>>> options ATH_DIAGAPI >>>>>> options ATH_ENABLE_11N >>>>>> options AH_DEBUG >>>>>> options AH_DEBUG_ALQ >>>>>> options ALQ >>>>>> device ath_hal >>>>>> option AH_SUPPORT_AR5416 >>>>>> device ath_rate_sample >>>>>> option AH_RXCFG_SDMAMW_4BYTES >>>>>> option AH_AR5416_INTERRUPT_MITIGATION >>>>>> # There's no DFS radar detection support yet so this won't actually >>>>>> # detect radars. It however does enable the rest of the channel cha= nge >>>>>> # machinery so DFS can be debugged. >>>>>> option ATH_ENABLE_DFS >>>>>> >>>>>> device mii >>>>>> device arge >>>>>> #options ARGE_DEBUG # Enable if_arge debugging f= or now >>>>>> >>>>>> #device usb >>>>>> #options USB_EHCI_BIG_ENDIAN_DESC # handle big= -endian byte order >>>>>> #options USB_DEBUG >>>>>> #options USB_HOST_ALIGN=3D32 # AR71XX (= MIPS in general?) requires this >>>>>> #device ehci >>>>>> >>>>>> device scbus >>>>>> #device umass >>>>>> device da >>>>>> >>>>>> device rb4xx >>>>>> >>>>>> # On-board SPI flash >>>>>> device spibus >>>>>> device ar71xx_spi >>>>>> device mmc >>>>>> device mmcsd >>>>>> device mmcspi >>>>>> device mx25l >>>>>> device nand >>>>>> device ar71xx_wdog >>>>>> >>>>>> device uart >>>>>> device uart_ar71xx >>>>>> >>>>>> device loop >>>>>> device ether >>>>>> device md >>>>>> device bpf >>>>>> device random >>>>>> device if_bridge >>>>>> device gif # ip[46] in ip[46] tunneling protoco= l >>>>>> device gre # generic encapsulation - only for I= Pv4 in IPv4 though atm >>>>>> >>>>>> # Enable GPIO >>>>>> device gpio >>>>>> device gpioled >>>>>> >>>>>> options AR71XX_ROUTERBOOT >>>>>> >>>>>> >>>>>> # $FreeBSD$ >>>>>> hint.apb.0.at=3D"nexus0" >>>>>> hint.apb.0.irq=3D4 >>>>>> >>>>>> # uart0 >>>>>> hint.uart.0.at=3D"apb0" >>>>>> # see atheros/uart_cpu_ar71xx.c why +3 >>>>>> hint.uart.0.maddr=3D0x18020003 >>>>>> hint.uart.0.msize=3D0x18 >>>>>> hint.uart.0.irq=3D3 >>>>>> >>>>>> #ohci >>>>>> #hint.ohci.0.at=3D"apb0" >>>>>> #hint.ohci.0.maddr=3D0x1c000000 >>>>>> #hint.ohci.0.msize=3D0x01000000 >>>>>> #hint.ohci.0.irq=3D6 >>>>>> >>>>>> #ehci >>>>>> #hint.ehci.0.at=3D"nexus0" >>>>>> #hint.ehci.0.maddr=3D0x1b000000 >>>>>> #hint.ehci.0.msize=3D0x01000000 >>>>>> #hint.ehci.0.irq=3D1 >>>>>> >>>>>> # pci >>>>>> hint.pcib.0.at=3D"nexus0" >>>>>> hint.pcib.0.irq=3D0 >>>>>> >>>>>> hint.arge.0.at=3D"nexus0" >>>>>> hint.arge.0.maddr=3D0x19000000 >>>>>> hint.arge.0.msize=3D0x1000 >>>>>> hint.arge.0.irq=3D2 >>>>>> # PHY4 =3D 1 << 4 >>>>>> hint.arge.0.phymask=3D0x10 >>>>>> # Uncomment this hint for RS (not PRO) >>>>>> # PHY20 =3D 1 << 20 >>>>>> # hint.arge.0.phymask=3D0x100000 >>>>>> hint.ukphy.0.at=3D"miibus0" >>>>>> >>>>>> hint.arge.1.at=3D"nexus0" >>>>>> hint.arge.1.maddr=3D0x1a000000 >>>>>> hint.arge.1.msize=3D0x1000 >>>>>> hint.arge.1.irq=3D3 >>>>>> # PHY1, PHY2, PHY3 >>>>>> hint.arge.1.phymask=3D0x00 >>>>>> # should be 100 for RS >>>>>> #hint.arge.1.media=3D100 >>>>>> #hint.arge.1.fduplex=3D1 >>>>>> # Uncomment this hint for RS (not PRO) >>>>>> # hint.arge.1.phymask=3D70000 >>>>>> >>>>>> # SPI flash >>>>>> hint.spi.0.at=3D"nexus0" >>>>>> hint.spi.0.maddr=3D0x1f000000 >>>>>> hint.spi.0.msize=3D0x10 >>>>>> >>>>>> hint.mx25l.0.at=3D"spibus0" >>>>>> hint.mx25l.0.cs=3D1 >>>>>> >>>>>> hint.rb_cpldbus.0.at=3D"spibus0" >>>>>> hint.rb_cpldbus.0.cs=3D1 >>>>>> # >>>>>> hint.onand.0.at=3D"nandbus0" >>>>>> hint.lnand.0.at=3D"nandbus0" >>>>>> hint.snand.0.at=3D"nandbus0" >>>>>> >>>>>> hint.flash.0.at=3D"nand0" >>>>>> hint.flash.0.size=3D"0x40000" >>>>>> hint.flash.0.offset=3D"0" >>>>>> hint.flash.0.name=3D"bootloader" >>>>>> hint.flash.1.at=3D"nand0" >>>>>> hint.flash.1.size=3D"0x3c0000" >>>>>> hint.flash.1.offset=3D"0x40000" >>>>>> hint.flash.1.name=3D"kernelfs" >>>>>> hint.flash.2.at=3D"nand0" >>>>>> hint.flash.2.size=3D"0" >>>>>> hint.flash.2.offset=3D"0x400000" >>>>>> hint.flash.2.name=3D"rootfs" >>>>>> >>>>>> hint.ar71xx_gpio.0.at=3D"nexus0" >>>>>> >>>>>> #hint.rb_nandbusy.0.at=3D"gpiobus0" >>>>>> >>>>>> hint.mmcspi.0.at=3D"spibus0" >>>>>> hint.mmcspi.0.cs=3D2 >>>>>> >>>>>> # Watchdog >>>>>> hint.ar71xx_wdog.0.at=3D"nexus0" >>>>>> >>>>>> >>>>>> br, >>>>>> >>>>>>> >>>>>>> >>>>>>> Adrian >>>>>>> >>>>>>> >>>>>>> On 2 January 2013 12:40, Monthadar Al Jaberi <monthadar@gmail.com> = wrote: >>>>>>>> I tested some more. First I changed the miniPCI slot. Now boot loo= ks like this: >>>>>>>> >>>>>>>> pcib0 at irq 0 on nexus0 >>>>>>>> pci0: <PCI bus> on pcib0 >>>>>>>> ath0: <Atheros 5413> irq 2 at device 19.0 on pci0 >>>>>>>> ath0: AR5413 mac 10.5 RF5413 phy 6.1 >>>>>>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 >>>>>>>> >>>>>>>> >>>>>>>> Then I created a hostap. But none of my other devices sees it (lap= top, iphone). >>>>>>>> >>>>>>>> A scan results in: >>>>>>>> >>>>>>>> # ifconfig wlan0 scan >>>>>>>> wlan0: ieee80211_scanreq: flags 0x1b duration 0x7fffffff mindwell = 0 >>>>>>>> maxdwell 0 nssid 0 >>>>>>>> wlan0: start_scan_locked: active scan, duration 2147483647 mindwel= l 0 >>>>>>>> maxdwell 0, desired mode 11g, append, nopick, once >>>>>>>> wlan0: scan set 11g dwell min 200ms max 200ms >>>>>>>> wlan0: scan_task: chan 11g -> 11g [active, dwell min 200ms max 2= 00ms] >>>>>>>> wlan0: ieee80211_ref_node (ieee80211_send_probereq:1822) >>>>>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 4 >>>>>>>> wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid "= " >>>>>>>> wlan0: scan_task: done, [ticks 2657909, dwell min 200 scanend 2150= 141333] >>>>>>>> wlan0: notify scan done >>>>>>>> root@rb433ah:~ # ath0: device timeout >>>>>>>> >>>>>>>> And when I try to ping a random IP address I get the following. >>>>>>>> Interesting is that it seems to "bail out" when it tries to send >>>>>>>> probe_resp (last in output): >>>>>>>> $ ping -c 1 172.168.3.2 >>>>>>>> PING 172.168.3.2 (172.168.3.2): 56 data bytes >>>>>>>> ath0: device timeout >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 8 >>>>>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [94:0c:6d:ad:61:18] discard frame, not to bss >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 48 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 2 >>>>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: >>>>>>>> 0x9ccca48e6a3b0c7f661c24413d7b9e54c5e59ddbe0c2bd96a2e65410b662f71a >>>>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 5 >>>>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "defau= lt" >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 4 >>>>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "defau= lt" >>>>>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 9 >>>>>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 43 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 45 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 47 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 44 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 51, len 8 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, = id 11, len 5 >>>>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 1= 0 >>>>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 47, len 1 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 74, len 14 >>>>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, = id 127, len 1 >>>>>>>> wlan0: received probe_req from 00:aa:70:77:bd:77 rssi 0 >>>>>>>> wlan0: [00:aa:70:77:bd:77] recv probe req >>>>>>>> wlan0: ieee80211_ref_node (ieee80211_send_proberesp:2489) >>>>>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 5 >>>>>>>> wlan0: send probe resp on channel 11 to 00:aa:70:77:bd:77 >>>>>>>> ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing >>>>>>>> .... >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Jan 1, 2013 at 7:33 PM, Monthadar Al Jaberi <monthadar@gma= il.com> wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> ath(4) failed to attach on my Routerboard RB433AH running FreeBSD >>>>>>>>> current. This is what I got during boo-up. >>>>>>>>> >>>>>>>>> pcib0 at irq 0 on nexus0 >>>>>>>>> pci0: <PCI bus> on pcib0 >>>>>>>>> ath0: <Atheros 5413> irq 3 at device 20.0 on pci0 >>>>>>>>> ath0: could not map interrupt >>>>>>>>> device_attach: ath0 attach returned 6 >>>>>>>>> >>>>>>>>> Any idea why? Anyone else is running ath(4) on this board? My wif= i >>>>>>>>> card is a Ubiquity X2 with AR5413 chip. >>>>>>>>> >>>>>>>>> br, >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Monthadar Al Jaberi >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Monthadar Al Jaberi >>>>>>>> _______________________________________________ >>>>>>>> freebsd-wireless@freebsd.org mailing list >>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>>>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@fre= ebsd.org" >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Monthadar Al Jaberi >>>>> >>>>> >>>>> >>>>> -- >>>>> Monthadar Al Jaberi >>>> >>>> >>>> >>>> -- >>>> Monthadar Al Jaberi >> >> >> >> -- >> Monthadar Al Jaberi --=20 Monthadar Al Jaberi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BsBSoKSqODze7VxsP-vN1D93K=4YYy7mc3PUHvnuuO1zy32Sw>