Date: Fri, 6 Apr 2001 06:38:22 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Ken Menzel <kenm@icarz.com> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: can't use sa0 (tape) on -stable-rc1 fresh install Message-ID: <Pine.BSF.4.21.0104060636500.24435-100000@beppo.feral.com> In-Reply-To: <009f01c0be9c$8d5e0a60$711663cf@icarz.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Have you a tape inserted? Build a CAMDEBUG kernel and do camcontrol debug -Ic 0:6:0 do the 'mt stat', with a tape inserted, and send me the output. -matt On Fri, 6 Apr 2001, Ken Menzel wrote: > I am re-posting this on the 'freebsd-scsi' as I got no answers on > freebsd-stable. (I also changed the subject line to be more clear). > sa0 doesn't work! > > Thought I would try out my new FreeBSD release. I just installed > FreeBSD on two new Dell servers here. (The same as all my other > servers). But the tapes drives won't work! Any ideas on what I did > wrong? I have three other servers running FreeBSD-stable with the same > DELL hardware (2400) and tape drives that work fine (Installed on > FBSD4.2) > . Here is the error: > janeway# mt status > mt: /dev/nsa0: Device not configured > janeway# > > However dmesg says differently: > > Waiting 15 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 6 lun 0 > sa0: <SONY TSL-11000 L0u6> Removable Sequential Access SCSI-2 device > sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > pass1 at ahc0 bus 0 target 6 lun 1 > pass1: <SONY TSL-11000 L0u6> Removable Changer SCSI-2 device > pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > pass4 at asr0 bus 0 target 6 lun 0 > pass4: <DELL 1x4 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device > > > output of uname > > FreeBSD janeway.icarz.com 4.3-RC FreeBSD 4.3-RC #0: Thu Apr 5 > 12:24:51 EDT 2001 > sysadm@janeway.icarz.com:/usr/obj/usr/src/sys/GENERIC i386 > > I tried rebuilding the kernel and sh MAKEDEV all, and a cvsup to > today. > > What else should I do? Any suggestions appreciated! > > Thanks! > > ----------------------------------------------------- > Ken Menzel ICQ# 9325188 > www.icarz.com kenm@icarz.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0104060636500.24435-100000>