Date: Sun, 4 Jul 2004 22:28:57 -0400 From: epilogue <epilogue@allstream.net> To: freebsd-questions@freebsd.org Subject: Connecting a USB Zip drive -- whatever am I doing wrong? Message-ID: <20040704222857.5e18dfc7@localhost>
next in thread | raw e-mail | index | archive | help
hello all, for many moons now, i'll occasionally dedicate a dark day to getting my USB Zip drive to work. i've been through the handbook, faq, relevant man pages, mailing lists and across the colossal googlesphere collecting bits and pieces, none of which seem to get me the desired result. i'm obviously missing something. i'm writing with the hope that, what i have managed to overlook will be so obvious and straighforward, some kind reader will take 2 seconds to point it out, so that i may zip off on my merry way. ### uname -a FreeBSD 4.10-RELEASE-p1 i386 ### relevant lines from kernel device vpo device scbus device da device uhci # uhci related entries show up in dmesg device usb device ugen i have also tried with the ohci device added, but it never generates any dmesg entries. from what i gather, uhci and ohci have an 'either - or' kind of relationship. i'm supposing that uhci is the right device for my system. now, when i boot with the zip device plugged in (whether or not there is a disk loaded), the system will hang until i unplug the usb cable. ### dmesg <snip> atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ##-- hangs about 30 seconds here, but chugs on happily after --## chip0: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0 on pci0 <snip> pccard: card inserted, slot 1 ad0: 17301MB <TOSHIBA MK1814GAV> [35152/16/63] at ata0-master UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master UDMA33 ##-- hangs here *until* i pull the usb plug. after i do, i get the following error messages but the boot finishes nicely. --## umass0: BBB reset failed, IOERROR umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB bulk-in clear stall failed, STALLED umass0: BBB bulk-out clear stall failed, STALLED Mounting root from ufs:/dev/ad0s2a umass0: at uhub0 port 1 (addr 2) disconnected umass0: detached ltmdm0: <Lucent Winmodem> port 0x1800-0x18ff,0x1080-0x1087 mem 0xfc000000-0xfc0000ff irq 5 at device 16.0 on pci0 ltmdm0: type Virtual 16550A umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2 umass0: Get Max Lun not supported (STALLED) umass0: BBB reset failed, IOERROR ### after booting. i plug the usb cable back in and usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, Zip 100(0x0001), Iomega(0x059b), rev 1.00 port 2 powered ### ps auxw | grep -i usb root 99 0.0 0.2 940 604 ?? Is 9:42PM 0:00.00 /usr/sbin/usbd root 4 0.0 0.0 0 0 ?? DL 5:42PM 0:00.00 (usbtask) root 3 0.0 0.0 0 0 ?? DL 5:42PM 0:00.00 (usb0) looks good (i think). ### /var/log/messages Jul 4 21:47:04 /kernel: umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2 Jul 4 21:47:04 /kernel: umass0: Get Max Lun not supported (STALLED) Jul 4 21:48:09 /kernel: umass0: BBB reset failed, IOERROR ### mounting i'm not sure that i 'get' which device the zip maps to nor how to determine this. i have tried about 40 different combinations of mount (mostly gleaned from my research), but i have yet to hit upon the right command. # mount -t msdos /dev/da* /mnt # * = practically every single one msdos: /dev/da0s4: Device not configured of the many combinations tried, /dev/usb0 has provided the most promising error message (i think). # mount -t msdos /dev/usb0 /mnt msdos: /dev/usb0: Block device required ### final notes 1) the Zip drive works on several other non-*nix systems 2) i *have* tried with more than just one disk. i'm guessing that the problem is that i'm just not mounting correctly, but hey, that's just a guess. :) ------ my apologies for the lengthy message. hopefully, it provided some useful troubleshooting info. please let me know if there are any further details i can provide. many thanks, epi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040704222857.5e18dfc7>