Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Jun 1999 20:24:48 +0200 (METDST)
From:      Michal Przybylski <michalp@man.poznan.pl>
To:        questions@FreeBSD.ORG
Subject:   atm problems
Message-ID:  <Pine.SGI.3.95.990614201207.13423A-100000@rose.man.poznan.pl>

next in thread | raw e-mail | index | archive | help
I have fore two PCA 200E PC ATM cards, on pentium 450MHz. 
The utility fore_dnld works very slow, it loads the pca200e.bin file into
card chip, but it takes about 1 minute to download code for each card.
What surprises me, after loading, when i type 
ifconfig -a, i get the following result:

xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 150.254.161.17 netmask 0xfffffff0 broadcast 150.254.161.31
        ether 00:10:4b:b8:4c:7e 
        media: 100baseTX <full-duplex>
        supported media: autoselect 100baseTX <full-duplex> 100baseTX
<half-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
<half-duplex> 10baseT/UTP
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 150.254.170.116 netmask 0xffffffc0 broadcast 150.254.170.127
        ether 00:60:97:52:65:e8 
        media: 10baseT/UTP (10baseT/UTP <half-duplex>)
        supported media: 10base2/BNC 10base5/AUI 10baseT/UTP <full-duplex>
10baseT/UTP <half-duplex> 10baseT/UTP
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
atma0: flags=43<UP,BROADCAST,RUNNING> mtu 9180
        ether 00:00:00:00:00:00 
atmb0: flags=43<UP,BROADCAST,RUNNING> mtu 9180
        inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
        ether 00:00:00:00:00:00 

I wonder why the atm interface does not have ethernet addres
??? Is it caused by wrong microcode file? or is it my mistake?
?
thanks in advance

Michal Przybylski
Poznan Supercomputing & Networking Center
Poland
email: michalp@man.poznan.pl                
tel. +48601567947                        




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SGI.3.95.990614201207.13423A-100000>