Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Sep 2004 07:40:58 -0700
From:      "Evan Dower" <evantd@hotmail.com>
To:        bettan@nerim.net
Cc:        freebsd-current@freebsd.org
Subject:   Re: netgear wg311 v2 and configuration
Message-ID:  <BAY8-F19mbwkMDnAKJC00019de8@hotmail.com>

next in thread | raw e-mail | index | archive | help
I had no problem giving it an ssid. I did however find that some things 
worked better after fresh after a restart. That is I put the appropriate 
command in /etc/start_if.ndis0 (which gets run automatically) and 
ifconfig_ndis0="DHCP" in /etc/rc.conf. When I restarted, it seemed to me 
that it picked up things it had ignored previously. Of course, you'll need 
to autoload the firmware then as well.
Cheers,
--
Evan Dower
Undergraduate, Computer Science
University of Washington
Public key: http://students.washington.edu/evantd/pgp-pub-key.txt
Key fingerprint = D321 FA24 4BDA F82D 53A9  5B27 7D15 5A4F 033F 887D





>From: "bettan" <bettan@nerim.net>
>To: "Evan Dower" <evantd@hotmail.com>
>Subject: Re: netgear wg311 v2 and configuration
>Date: Thu, 2 Sep 2004 10:02:27 +0200
>
>Can you give a ssid with NDSulator ? I would like know if other people can
>because when i do "ifconfig ndis0 inet 192.168.2.1 netmask 255.255.255.0
>ssid test" i have with ifconfig ndis0 :
>
>ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::209:5bff:fe8f:fa5d%ndis0 prefixlen 64 scopeid 0x8
>         inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
>         ether 00:09:5b:8f:fa:5d
>         media: IEEE 802.11 Wireless Ethernet autoselect
>         status: no carrier
>         ssid ""
>         channel 6 authmode OPEN powersavemode OFF powersavesleep 100
>         rtsthreshold 2312 protmode CTS
>         wepmode OFF weptxkey 1
>
>ssid "" ?
>----- Original Message -----
>From: "Evan Dower" <evantd@hotmail.com>
>To: <bettan@nerim.net>
>Cc: <freebsd-current@freebsd.org>
>Sent: Thursday, September 02, 2004 3:49 AM
>Subject: Re: netgear wg311 v2 and configuration
>
>
> > You may very well be able to. I have no idea whether setting "mediaopt
> > hostap" will work. I have no experience with it. I do know that you 
>cannot
> > set "mode 11g", but that there is no need, because it will automatically
> > associate at the highest speed it can. Since it is not a native driver,
> > things may not work exactly as expected. You should have several sysctls
>to
> > play with, and you may need to use these instead of doing things the
>normal
> > way. I really have no idea. The expert would be Bill Paul (wpaul), since
>he
> > just recently added the support for this card. Perhaps he'll chime in...
> > Sorry I couldn't be of more assistance,
> > --
> > Evan Dower
> > Undergraduate, Computer Science
> > University of Washington
> > Public key: http://students.washington.edu/evantd/pgp-pub-key.txt
> > Key fingerprint = D321 FA24 4BDA F82D 53A9  5B27 7D15 5A4F 033F 887D
> >
> >
> >
> >
> >
> > >From: "bettan" <bettan@nerim.net>
> > >To: "Evan Dower" <evantd@hotmail.com>
> > >Subject: Re: netgear wg311 v2 and configuration
> > >Date: Wed, 1 Sep 2004 22:52:09 +0200
> > >
> > >I can't do an access point with this card ?
> > >----- Original Message -----
> > >From: "Evan Dower" <evantd@hotmail.com>
> > >To: <bettan@nerim.net>; <freebsd-current@freebsd.org>
> > >Sent: Wednesday, September 01, 2004 10:36 PM
> > >Subject: RE: netgear wg311 v2 and configuration
> > >
> > >
> > > > I don't believe there is any need to specify the media (or mode for
>that
> > > > matter). It will simply go as fast as it can. Furthermore, setting 
>the
> > > > stationname is still unsupported and will fail.
> > > > Cheers,
> > > > --
> > > > Evan Dower
> > > > Undergraduate, Computer Science
> > > > University of Washington
> > > > Public key: http://students.washington.edu/evantd/pgp-pub-key.txt
> > > > Key fingerprint = D321 FA24 4BDA F82D 53A9  5B27 7D15 5A4F 033F 887D
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >From: "bettan" <bettan@nerim.net>
> > > > >To: <freebsd-current@freebsd.org>
> > > > >Subject: netgear wg311 v2 and configuration
> > > > >Date: Wed, 1 Sep 2004 21:10:32 +0200
> > > > >
> > > > >hello , i tried to configure my wireless card and when i do :
> > > > >ifconfig ndis0 ssid linux-win.com channel 11 media DS/54Mbps 
>mediaopt
> > > > >hostap up stationname "FreeBSD AP"
> > > > >
> > > > >I have : ifconfig: unknown media subtype: DS/54Mbps
> > > > >
> > > > >  and i don't understand why.FreeBSD supports 54 Mbps no ? Have you 
>a
> > > > >solution ?
> > > > >_______________________________________________
> > > > >freebsd-current@freebsd.org mailing list
> > > > >http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > > > >To unsubscribe, send any mail to
> > >"freebsd-current-unsubscribe@freebsd.org"
> > > >
> > > > _________________________________________________________________
> > > > Express yourself instantly with MSN Messenger! Download today - it's
> > >FREE!
> > > > hthttp://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> > > >
> > >
> >
> > _________________________________________________________________
> > Don't just search. Find. Check out the new MSN Search!
> > http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> >
> > _______________________________________________
> > freebsd-current@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to 
>"freebsd-current-unsubscribe@freebsd.org"
>

_________________________________________________________________
Don’t just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY8-F19mbwkMDnAKJC00019de8>