Date: Mon, 25 Aug 1997 16:13:37 -0500 (CDT) From: tphan@asl.dl.nec.com (Timothy Phan) To: aic7xxx@freebsd.org (AIC7770 List) Subject: multiple scsi device Message-ID: <199708252113.QAA00414@aslws174.asl.dl.nec.com>
next in thread | raw e-mail | index | archive | help
Hi,
I hope that I'm sending this problem to the right group. Is there
some limitation or restriction on connect multiple scsi
devices and lenght of the scsi cable onto the adaptec?
I'm currently have 2 internal harddrive, an internal
CDROM, and 2 external harddrive (total of 5) connected to the
adaptec control. Everything is recognized by the
control in Linux without any problem. In the last
few days, I've tried to add one addition external
harddrive (to make it 6 in total) and it is not being
recognized.
If I removed one of the other, then it would be ok.
I've check the SCSI ID for each and they all have
its own uniq ID. All the cable I used seem to be OK because
if it is hooked up individually, then no problem.
Each of the external cable is about 2 feet in length and
the internal cable has 7 connector and I do not remember
its length.
Thanks.
--
-------------------- Timothy C. Phan (tphan@asl.dl.nec.com)
-------------------- NEC America, Inc. ASL
-------------------- 1525 Walnut Hill Ln. Irving, TX 75038
-------------------- tel: (214)-518-3437 fax: (214)-518-3499
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708252113.QAA00414>