Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Oct 2001 23:09:39 -0600
From:      "Kenneth D. Merry" <ken@kdm.org>
To:        Tim <tim@futuresouth.com>
Cc:        freebsd-scsi@FreeBSD.ORG
Subject:   Re: Exabyte EXB-210 tape changer
Message-ID:  <20011023230939.A32580@panzer.kdm.org>
In-Reply-To: <20011023234149.A29746@futuresouth.com>; from tim@futuresouth.com on Tue, Oct 23, 2001 at 11:41:49PM -0500
References:  <20011023234149.A29746@futuresouth.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Oct 23, 2001 at 23:41:49 -0500, Tim wrote:
> Does anybody have an Exabyte EXB-210 tape changer working with FreeBSD
> 4.x? I get the following with chio.  It doesn't look like chio.c or
> scsi_ch.c has been changed recently so I don't think updating the OS would
> help.


Try using 'chio ielem' before you try to move things around.

It may be that the changer doesn't know where things are without being
prompted to look.

> % uname -a
> FreeBSD hades.number8.net 4.4-PRERELEASE FreeBSD 4.4-PRERELEASE #1: Thu Aug 16 19:04:26 CDT 2001 root@hades.number8.net:/usr/src/sys/compile/BACKUP  i386
> % dmesg
> [..]
> sa0 at ahc0 bus 0 target 1 lun 0
> sa0: <EXABYTE Mammoth2 v02r> Removable Sequential Access SCSI-2 device
> sa0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
> Mounting root from ufs:/dev/ad0s1a
> ch0 at ahc0 bus 0 target 0 lun 0
> ch0: <EXABYTE EXB-210 1.07> Removable Changer SCSI-2 device
> ch0: 3.300MB/s transfers
> ch0: 7 slots, 1 drive, 1 picker, 0 portals
> (ch0:ahc0:0:0:0): MOVE MEDIUM. CDB: a5 0 0 56 0 52 0 1 0 0 0 0
> (ch0:ahc0:0:0:0): NOT READY asc:4,8e
> (ch0:ahc0:0:0:0): Vendor Specific ASCQ
> (ch0:ahc0:0:0:0): MOVE MEDIUM. CDB: a5 0 0 56 0 52 0 1 0 0 0 0
> (ch0:ahc0:0:0:0): NOT READY asc:4,8e
> (ch0:ahc0:0:0:0): Vendor Specific ASCQ
> (ch0:ahc0:0:0:0): MOVE MEDIUM. CDB: a5 0 0 56 0 2 0 52 0 0 0 0
> (ch0:ahc0:0:0:0): NOT READY asc:4,8e
> (ch0:ahc0:0:0:0): Vendor Specific ASCQ
> (ch0:ahc0:0:0:0): MOVE MEDIUM. CDB: a5 0 0 56 0 52 0 1 0 0 0 0
> (ch0:ahc0:0:0:0): NOT READY asc:4,8e
> (ch0:ahc0:0:0:0): Vendor Specific ASCQ
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-scsi" in the body of the message

Ken
-- 
Kenneth Merry
ken@kdm.org

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011023230939.A32580>