Date: Sat, 17 Feb 2001 23:36:52 -0500 (EST) From: Mike Squires <mikes@ct980320-b.blmngtn1.in.home.com> To: Bob Greene <rgreene@tclme.org> Cc: FreeBSD questions <freebsd-questions@freebsd.org> Subject: Re: Trouble adding second SCSI drive Message-ID: <200102180436.f1I4aqt74706@ct980320-b.blmngtn1.in.home.com> In-Reply-To: <3A8F3D55.E2E0A398@tclme.org> "from Bob Greene at Feb 17, 2001 09:11:17 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> I'm having trouble configuring a second SCSI drive on the same chain as All 4 of my disks are on a single chain under 4.2-STABLE; however, they were all installed at the same time, when the system was installed. Do you have a FreeBSD partition on the new disk? relevant portion of dmesg... dpt0: <DPT Caching SCSI RAID Controller> port 0xef20-0xef3f irq 5 at device 14.0 on pci0 dpt0: DPT PM3334UDW FW Rev. 07L5, 3 channels, 64 CCBs da0 at dpt0 bus 0 target 0 lun 0 da0: <SEAGATE ST410800WSUN9.0G 0407> Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 8669MB (17755613 512 byte sectors: 255H 63S/T 1105C) da1 at dpt0 bus 0 target 1 lun 0 da1: <SEAGATE ST410800WSUN9.0G 0407> Fixed Direct Access SCSI-2 device da1: Tagged Queueing Enabled da1: 8669MB (17755613 512 byte sectors: 255H 63S/T 1105C) da2 at dpt0 bus 0 target 2 lun 0 da2: <SEAGATE ST410800WSUN9.0G 0407> Fixed Direct Access SCSI-2 device da2: Tagged Queueing Enabled da2: 8669MB (17755613 512 byte sectors: 255H 63S/T 1105C) da3 at dpt0 bus 0 target 3 lun 0 da3: <SEAGATE ST410800WSUN9.0G 0407> Fixed Direct Access SCSI-2 device da3: Tagged Queueing Enabled da3: 8669MB (17755613 512 byte sectors: 255H 63S/T 1105C) Mike Squires To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102180436.f1I4aqt74706>