Date: Wed, 06 Jun 2007 15:20:43 +0200 From: Mikael Batard <support@wanagain.net> To: freebsd-isdn@freebsd.org Subject: Re: Digium b410p with i4b Message-ID: <4666B4AB.4090908@wanagain.net> In-Reply-To: <200706061455.21425.hselasky@c2i.net> References: <4665CAFA.3080801@wanagain.net> <200706060916.48120.hselasky@c2i.net> <46667DD4.3010609@wanagain.net> <200706061455.21425.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06.06.2007 14:55, Hans Petter Selasky wrote : > On Wednesday 06 June 2007 11:26, Mikael Batard wrote: >> On 06.06.2007 09:16, Hans Petter Selasky wrote : >>> This entry should be under "double_clock" = 0. >> OK, why ? > > It related to the X-tal used with the chip. OK >>> You need to use "chan_capi" from the SVN repo, and not "zaptel", to get >>> the ISDN cards detected under Asterisk. Also I4B has a new Fast Fourier >>> Transform Based Acoustic Echo Canceller. Did you try that? >> Didn't try yet, how does it work ? > > In the file: > > /usr/src/sys/i4b/include/i4b_global.h > > You can set: > > #define I4B_ECHO_CANCEL_P_COMPLEX (9) > > to 10, to cancel more of the far echo. After changing this variable you have > to recompile the kernel. > > Use "isdnconfig -u 8 -c 1 dump_ec" and "isdnconfig -u 8 -c 2 dump_ec" to dump > the Echo Cancel FIR filter directly to Matlab or Octave. OK, I'm gonna try this later, but not on the Digium b410p, because this card has an hardware echo cancellation. So I'll enable this on the cheap Passive ISDN BRI card. >> My capi.conf (ISDN1 = Passive ISDN BRI, ISDN2 = Digium B410P): >> >> [general] >> >> nationalprefix=0 >> internationalprefix=00 >> rxgain=0.8 >> txgain=0.8 >> alaw=yes >> >> [ISDN1] >> >> isdnmode=msn >> incomingmsn=* >> controller=0 >> group=1 >> softdtmf=1 >> relaxdtmf=on >> accountcode= >> context=capi-in >> holdtype=local >> echocancel=yes >> echosquelch=no >> devices=2 >> dtmf_generate=yes >> >> >> [ISDN2] >> >> isdnmode=MSN >> incomingmsn=* >> controller=8 >> group=1 >> softdtmf=0 >> relaxdtmf=off >> accountcode= >> context=capi-in >> holdtype=local >> echocancel=yes >> echosquelch=no >> devices=2 >> > > Config looks OK. > > You might want to use "bridge=yes" if you want that calls should be bridged in > hardware on the HFC-4S. OK thanks. Regards, -- Mikael Batard Wan Again 12 Route de l'Isle 84510 Caumont sur Durance Tel: +33 (0)4 90 01 26 86 Fax: +33 (0)4 90 23 58 05 http://www.wanagain.fr/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4666B4AB.4090908>