Date: Sun, 02 Jan 2022 21:07:30 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 260868] possible i386 regression after ce35a3bc852d25cb989bc1f3dc4ddb723d7d5117 Message-ID: <bug-260868-227-pgxQ0LYohZ@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-260868-227@https.bugs.freebsd.org/bugzilla/> References: <bug-260868-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D260868 --- Comment #12 from mike@sentex.net --- Arggg, very sorry. My fault, I was not paying attention to !scp this AM as I was sending the built image to the wrong location to burn the resultant ima= ge. Anyways, I can confirm the boot looks good with your patch! OK boot -v ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-STABLE #1 stable/13-682886d11-dirty: Sun Jan 2 15:52:05 EST 2= 022 =20=20=20 mdtancsa@nano13-i386.sentex.ca:/usr/obj/nanobsd.alix2b/usr/src/i386.i386/sy= s/alix i386 FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 Preloaded elf kernel "/boot/kernel/kernel" at 0x132c000. Preloaded elf module "/boot/kernel/u3g.ko" at 0x13348ac. Preloaded boot_entropy_cache "/boot/entropy" at 0x1334cf4. Preloaded TSLOG data "TSLOG" at 0x1334d40. Early TSC frequency 498077420Hz calibrated from 8254 PIT CPU: Geode(TM) Integrated Processor by AMD PCS (498.08-MHz 586-class CPU) Origin=3D"AuthenticAMD" Id=3D0x5a2 Family=3D0x5 Model=3D0xa Stepping= =3D2 Features=3D0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX> AMD Features=3D0xc0400000<MMX+,3DNow!+,3DNow!> L1 2MB data TLB: 0 entries, 0-way associative L1 2MB instruction TLB: 0 entries, 0-way associative L1 4KB data TLB: 16 entries, fully associative L1 4KB instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative L1 instruction cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associa= tive L2 2MB unified TLB: 4 entries, disabled/not present L2 4KB unified TLB: 0 entries, disabled/not present L2 unified cache: 128 kbytes, 32 bytes/line, 1 lines/tag, 4-way associative Write Allocate Disable real memory =3D 268435456 (256 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000007fffff, 7340032 bytes (1792 pages) 0x0000000001429000 - 0x000000000fbb4fff, 242794496 bytes (59276 pages) avail memory =3D 249569280 (238 MB) bios32: Found BIOS32 Service Directory header at 0x4fd110 bios32: Entry =3D 0xfd0e4 (4fd0e4) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xcf35 pnpbios: Bad PnP BIOS data checksum Other BIOS signatures found: random: read 4096 bytes from preloaded cache random: unblocking device. hostuuid: using 00000000-0000-0000-0000-000000000000 ULE: setup cpu 0 random: entropy device external interface null: <full device, null device, zero device> io: <I/O> crypto: <crypto core> kbd0 at kbdmux0 mem: <memory> K6-family MTRR support enabled (2 registers) vtvga0: <VT VGA driver> crypto: assign cryptosoft0 driver id 0, flags 0x6000000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 1 [class=3D060000] [hdr=3D80] is there (id=3D20801= 022) pcibios: BIOS version 2.10 pcib0 pcibus 0 pci0: <PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x2080, revid=3D0x33 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0220, cachelnsz=3D8 (dwords) lattimer=3D0xf8 (7440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n= s) map[10]: type I/O Port, range 32, base 0xac1c, size 2, enabled found-> vendor=3D0x1022, dev=3D0x2082, revid=3D0x00 domain=3D0, bus=3D0, slot=3D1, func=3D2 class=3D10-10-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x02a0, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 map[10]: type Memory, range 32, base 0xefff4000, size 14, enabled found-> vendor=3D0x1106, dev=3D0x3053, revid=3D0x96 domain=3D0, bus=3D0, slot=3D9, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 (20= 00 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled map[14]: type Memory, range 32, base 0xe0000000, size 8, enabled found-> vendor=3D0x1106, dev=3D0x3053, revid=3D0x96 domain=3D0, bus=3D0, slot=3D10, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 (20= 00 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x1400, size 8, enabled map[14]: type Memory, range 32, base 0xe0040000, size 8, enabled found-> vendor=3D0x1106, dev=3D0x3053, revid=3D0x96 domain=3D0, bus=3D0, slot=3D11, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 (20= 00 ns) intpin=3Da, irq=3D15 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled map[14]: type Memory, range 32, base 0xe0080000, size 8, enabled found-> vendor=3D0x1022, dev=3D0x2090, revid=3D0x03 domain=3D0, bus=3D0, slot=3D15, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0009, statreg=3D0x02a0, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n= s) map[10]: type I/O Port, range 32, base 0x6000, size 3, enabled map[14]: type I/O Port, range 32, base 0x6100, size 8, enabled map[18]: type I/O Port, range 32, base 0x6200, size 6, enabled map[20]: type I/O Port, range 32, base 0x9d00, size 7, enabled map[24]: type I/O Port, range 32, base 0x9c00, size 6, enabled found-> vendor=3D0x1022, dev=3D0x209a, revid=3D0x01 domain=3D0, bus=3D0, slot=3D15, func=3D2 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x02a0, cachelnsz=3D8 (dwords) lattimer=3D0xf8 (7440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n= s) map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=3D0x1022, dev=3D0x2094, revid=3D0x02 domain=3D0, bus=3D0, slot=3D15, func=3D4 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0230, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xefffe000, size 12, enabled found-> vendor=3D0x1022, dev=3D0x2095, revid=3D0x02 domain=3D0, bus=3D0, slot=3D15, func=3D5 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0230, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xefffd000, size 12, enabled Geode LX: PC Engines ALIX.2 v0.99m tinyBIOS V1.4a (C)1997-2007 MFGPT bar: f00100006200 pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached) vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0 vr0: Quirks: 0x2 vr0: Revision: 0x96 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: OUI 0x0002c6, model 0x0034, rev. 3 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-f= low vr0: bpf attached vr0: Ethernet address: 00:0d:b9:36:c3:1c vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0 vr1: Quirks: 0x2 vr1: Revision: 0x96 miibus1: <MII bus> on vr1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x0002c6, model 0x0034, rev. 3 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-f= low vr1: bpf attached vr1: Ethernet address: 00:0d:b9:36:c3:1d vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0 vr2: Quirks: 0x2 vr2: Revision: 0x96 miibus2: <MII bus> on vr2 ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy2: OUI 0x0002c6, model 0x0034, rev. 3 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-f= low vr2: bpf attached vr2: Ethernet address: 00:0d:b9:36:c3:1e isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at de= vice 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0 usbus0 on ohci0 ohci0: usbpf: Attached ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xefffd000-0xefffdfff ir= q 12 at device 15.5 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 ehci0: usbpf: Attached cpu0 pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0 sc0 failed to probe on isa0 vga0 failed to probe on isa0 atkbdc0 failed to probe at port 0x60 on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 uart1: fast interrupt uart1: PPS capture mode: DCD isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 498077420 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached stray irq7 crypto: <crypto device> IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 pflog0: bpf attached ugen1.1: <AMD EHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <AMD OHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 Trying to mount root from ufs:/dev/ada0s1a [ro]... ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff Root mount waiting for: CAM usbus0 usbus1 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <CF 2GB 20110221> ATA-7 device ada0: Serial Number TSS50037130117092408 ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes) ada0: 1919MB (3931200 512 byte sectors) GEOM: new disk ada0 pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <CF 2GB 20110221> ATA-7 device pass0: Serial Number TSS50037130117092408 pass0: 100.000MB/s transfers (UDMA5, PIO 512bytes) uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.2: <Sierra Wireless, Incorporated MC7700> at usbus1 u3g0 on uhub0 u3g0: <Sierra Wireless, Incorporated MC7700, class 0/0, rev 2.00/0.06, addr= 2> on usbus1 u3g0: port 3 supports modem control u3g0: port 4 supports modem control u3g0: port 5 supports modem control u3g0: Found 6 ports. mountroot: waiting for device /dev/ada0s1a... atrtc0: providing initial system time start_init: trying /sbin/init Starting file system checks: /dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ada0s1a: clean, 362308 free (1844 frags, 45058 blocks, 0.1% fragmentat= ion) /dev/ada0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ada0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation) /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, genera= ting a new one Setting hostuuid: b9fd83f3-6c0e-11ec-8cdb-000db936c31c. Setting hostid: 0xd68a03f8. Mounting local filesystems:. Setting hostname: kernpatch2.sentex.ca. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,AT= TACH,CACHED Feeding entropy: dd: /boot/entropy: Read-only file system . ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE /etc/rc: WARNING: $swapfile is obsolete. Ignored. lo0: link state changed to UP vr0: link state changed to DOWN vr1: link state changed to DOWN vr2: link state changed to DOWN Starting Network: lo0 vr0 vr1 vr2. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 groups: lo ndvr0: link state changed to UP 6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> vr0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTAT= E> ether 00:0d:b9:36:c3:1c media: Ethernet autoselect (100baseTX <full-duplex>) status: active nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> vr1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTAT= E> ether 00:0d:b9:36:c3:1d inet 192.168.241.129 netmask 0xffffff00 broadcast 192.168.241.255 media: Ethernet autoselect (none) status: no carrier nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> vr2: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTAT= E> ether 00:0d:b9:36:c3:1e inet 192.168.1.51 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (none) status: no carrier nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Starting devd. Starting dhclient. DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 13 DHCPOFFER from 192.168.0.12 DHCPREQUEST on vr0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.12 arp: 00:0d:b9:20:f6:b4 is using my IP address 192.168.254.2 on vr0! bound to 192.168.0.90 -- renewal in 1800 seconds. Starting pflog. pflog0: promiscuous mode enabled add host 127.0.0.1: gateway lo0 fib 0: route already in table 2022-01-02T15:58:42.765039-05:00 kernpatch2.sentex.ca pflogd 556 - - [priv]: msg PRIV_OPEN_LOG received Additional inet routing options: gateway=3DYES. add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Enabling pf. Clearing /tmp (X related). Creating and/or trimming log files. Updating /var/run/os-release done. Updating motd:. Starting syslogd. Mounting late filesystems:. Starting inetd. Configuring vt: blanktime. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Sun Jan 2 15:59:08 EST 2022 FreeBSD/i386 (kernpatch2.sentex.ca) (ttyu0) login:=20 0(kernpatch2)# sysctl -a kern.timecounter kern.timecounter.tsc_shift: 1 kern.timecounter.invariant_tsc: 0 kern.timecounter.fast_gettime: 1 kern.timecounter.tick: 1 kern.timecounter.choice: TSC(800) i8254(0) dummy(-1000000) kern.timecounter.hardware: TSC kern.timecounter.alloweddeviation: 5 kern.timecounter.timehands_count: 2 kern.timecounter.stepwarnings: 0 kern.timecounter.tc.TSC.quality: 800 kern.timecounter.tc.TSC.frequency: 498077420 kern.timecounter.tc.TSC.counter: 168552419 kern.timecounter.tc.TSC.mask: 4294967295 kern.timecounter.tc.i8254.quality: 0 kern.timecounter.tc.i8254.frequency: 1193182 kern.timecounter.tc.i8254.counter: 47506 kern.timecounter.tc.i8254.mask: 65535 0(kernpatch2)# --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-260868-227-pgxQ0LYohZ>