Date: Thu, 13 Sep 2012 14:42:26 +0300 From: Arkadiy Dudevich <dudevitch@englerllc.com> To: Quentin SCHWERKOLT <develloper.unix@hotmail.fr> Cc: "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org> Subject: Re: Laptop battery status on FreeBSD9 Message-ID: <201209131442.26574.dudevitch@englerllc.com> In-Reply-To: <BAY002-W15057A21BA44FEDB061B24D84910@phx.gbl> References: <201209131321.53472.dudevitch@englerllc.com> <BAY002-W15057A21BA44FEDB061B24D84910@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On 13 =D1=81=D0=B5=D0=BD=D1=82=D1=8F=D0=B1=D1=80=D1=8F 2012 14:21:06 Quenti= n SCHWERKOLT wrote: > Hi, >=20 > My HP EliteBook 8540p running FreeBSD 9.1-PRERELEASE has a not > dischargeable battery too. ;-) Some time, acpi is working fine (there is > about 3 weeks for the last time), the data provided by acpiconf was > reactualized and the kernel said when ac power was plugged/unplugged. > Currently the kernel said only when I unplug ac power and lid status. >=20 I was looking through the latest posts in the thread. Many problems it with= =20 HP. I checked on another laptop (Lenovo E530/3259A33) - everything is working=20 fine. > Cordially. > Q. Schwerkolt >=20 > > From: dudevitch@englerllc.com > > To: freebsd-acpi@freebsd.org > > Date: Thu, 13 Sep 2012 13:21:53 +0300 > > Subject: Laptop battery status on FreeBSD9 > >=20 > > Good day, > > Laptop HP 6720S. Battery status is updated only at the time of reboot. > > # uname -a > > FreeBSD ark 9.1-RC1 FreeBSD 9.1-RC1 #0 r240390: Wed Sep 12 17:16:19 EEST > > 2012 amd64 > > At the 9th release was the same. Tried to load FreeBSD7 with USB drive. > > Everything is normal. > > I specifically checked. Cut off the AC adapter for an hour. > > Indications apm-l && acpiconf-i 0 unchanged. > >=20 > > With AC supply: > > # acpiconf -i 0 > > Design capacity: 4638 mAh > > Last full capacity: 4638 mAh > > Technology: secondary (rechargeable) > > Design voltage: 10800 mV > > Capacity (warn): 232 mAh > > Capacity (low): 47 mAh > > Low/warn granularity: 100 mAh > > Warn/full granularity: 100 mAh > > Model number: Primary > > Serial number: 03554 2012/02/17 > > Type: LIon > > OEM info: Hewlett-Packard > > State: high > > Remaining capacity: 95% > > Remaining time: unknown > > Present rate: 1291 mA (15874 mW) > > Present voltage: 12296 mV > >=20 > > Without AC supply(after 20 min): > > acpiconf -i 0 > > Design capacity: 4638 mAh > > Last full capacity: 4638 mAh > > Technology: secondary (rechargeable) > > Design voltage: 10800 mV > > Capacity (warn): 232 mAh > > Capacity (low): 47 mAh > > Low/warn granularity: 100 mAh > > Warn/full granularity: 100 mAh > > Model number: Primary > > Serial number: 03554 2012/02/17 > > Type: LIon > > OEM info: Hewlett-Packard > > State: high > > Remaining capacity: 95% > > Remaining time: unknown > > Present rate: 1291 mA (15874 mW) > > Present voltage: 12296 mV > >=20 > > What information is needed? =2D-=20 Best regards, Arkadiy Dudevich, ENGLER UKRAINE LLC mailto: dudevitch@englerllc.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201209131442.26574.dudevitch>