From owner-freebsd-hackers  Tue Mar 18 00:09:24 1997
Return-Path: <owner-hackers>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id AAA12505
          for hackers-outgoing; Tue, 18 Mar 1997 00:09:24 -0800 (PST)
Received: from sinbin.demos.su (sinbin.demos.su [194.87.0.31])
          by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id AAA12498
          for <hackers@freebsd.org>; Tue, 18 Mar 1997 00:09:18 -0800 (PST)
Received: by sinbin.demos.su id LAA24272;
  (8.6.12/D) Tue, 18 Mar 1997 11:08:39 +0300
From: bag@sinbin.demos.su (Alex G. Bulushev)
Message-Id: <199703180808.LAA24272@sinbin.demos.su>
Subject: Re: cvs commit:  src/sys/pci if_fxp.c if_fxpreg.h
To: davidg@freefall.freebsd.org (David Greenman)
Date: Tue, 18 Mar 1997 11:08:39 +0300 (MSK)
Cc: hackers@freebsd.org, mishania@demos.su
In-Reply-To: <199703171108.DAA05042@freefall.freebsd.org> from "David Greenman" at Mar 17, 97 03:08:22 am
X-Mailer: ELM [version 2.4 PL24 ME7a]
Content-Type: text
Sender: owner-hackers@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

> 
> davidg      97/03/17 03:08:21
> 
>   Modified:    sys/pci   if_fxp.c if_fxpreg.h
>   Log:
>   Fixed two deficiencies in the driver that have existed since it was
>   written:
>   
>   1) Full duplex mode is now supported (and works!)
>   2) The 10Mbps-only PCI Pro/10 should now work (untested, however)
>   
>   Thanks to Justin Gibbs for providing a PCI bus analyzer trace while the
>   Intel Windows driver was configuring the board...this made it possible
>   to figure out the mystery bit that I wasn't setting in the PHY for full
>   duplex to work.
>   
>   Revision  Changes    Path
>   1.30      +89 -22    src/sys/pci/if_fxp.c
>   1.7       +27 -1     src/sys/pci/if_fxpreg.h
> 
> 

we check this driver for 2.2-R,
but before compiling kernel i change line 1101 in if_fxp.c from
	error = ether_ioctl(ifp, command, data);
to
	ether_ioctl(ifp, command, data);
	^^^^^^^^^^^ is void in 2.2-R

after this kernel compiled without any problems ...

but full duplex mode not work properly ...

in half duplex we have 2400 KBytes/sec via ftp
in full duplex we have   20 KBytes/sec as for previous revision of driver ...

we have 82557 rev 1

   Alex.