Date: Fri, 6 Jul 2001 21:48:25 +0000 (GMT) From: bruno schwander <bruno@tinkerbox.org> To: questions@freebsd.org Subject: XFree86 4.1 Message-ID: <Pine.BSF.4.21.0107062140390.229-100000@duron.bschwand.net>
next in thread | raw e-mail | index | archive | help
Hi all,
I built XFree86 4.1 from the ports and I am unable to make it work. when I
try to run startx as root, it just makes my pc reboot after a few seconds
!
This is on FreeBSD 4.3 stable, athlon 1 gig, matrox G400.
I tried with and without the mga_hal binary downloaded from matrax ftp,
same result. I tried to generate a new XF86Config from the xf86config
script, and then tried with the XF86Config that I had working with 4.0
Any suggestions ?
Thanks
bruno
here is the end of /var/log/XFree86.0.log
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(==) MGA(0): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "mga_hal"
(II) LoadModule: "mga_hal"
(II) Loading
/usr/X11R6/lib/modules/drivers/mga_hal_drv.o
(II) Module mga_hal: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) MGA(0): Matrox HAL module used
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xF6000000
(--) MGA(0): MMIO registers at 0xF4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xF3800000
(--) MGA(0): BIOS at 0xF5FF0000
(II) xf86ReadBIOS(f6000000, 0, Buf, 40)-> 55 aa 40 eb...
(II) xf86ReadBIOS(f6000000, 0, Buf, 10000)-> 55 aa 40 eb...
(--) MGA(0): Video BIOS info block at offset 0x07B20
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xf4000000,0x4000) was already clear
and /etc/X11/XF86Config
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# Load "extmod"
Load "xie"
# Load "pex5"
# Load "glx"
# Load "dri"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # <i>
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # <i>
#Option "Rotate" # [<str>]
#Option "TexturedVideo" # [<bool>]
#Option "Crtc2Half" # [<bool>]
#Option "Crtc2Ram" # <i>
#Option "Int10" # [<bool>]
#Option "AGPMode" # <i>
#Option "DigitalScreen" # [<bool>]
#Option "TV" # [<bool>]
#Option "TVStandard" # [<str>]
#Option "CableType" # [<str>]
#Option "NoHal" # [<bool>]
#Option "SwappedHead" # [<bool>]
#Option "DRI" # [<bool>]
Identifier "Card0"
Driver "mga"
VendorName "Matrox"
BoardName "MGA G400 AGP"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0107062140390.229-100000>