Date: Tue, 24 Apr 2018 01:40:21 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: freebsd-mips@freebsd.org Cc: Bernd Walter <ticso@cicely7.cicely.de> Subject: WDR-4300 problems Message-ID: <20180423234020.GW85060@cicely7.cicely.de>
next in thread | raw e-mail | index | archive | help
I'm running a TP-Link WDR4300 on an image I'd build end of 2015 with
freebsd-wifi-build.
Now I want another system (and later on update the other one), but I
also never liked the mini OS and I need a few more features on it.
Since I never had success with stable rootfs on USB drives on any
Atheros based system I like to go nfsroot instead.
Now that's where my problem begin.
I also started with freebsd-wifi-build as I remembered that it created
a perfectly fine root tree.
I've started with current (r332885) and fresh checked out freebsd-wifi-build
(9d8dfe08a6bccd6f94b742b23c6cf0952691e149).
I did the following changes:
[70]cicely7> svn diff
Index: TL-WDR4300
===================================================================
--- TL-WDR4300 (revision 332885)
+++ TL-WDR4300 (working copy)
@@ -39,8 +39,8 @@
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
-device geom_uzip
-options GEOM_UZIP
+#device geom_uzip
+#options GEOM_UZIP
# Used for the static uboot partition map
device geom_map
@@ -51,4 +51,10 @@
options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
-options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
+options BOOTP
+options BOOTP_NFSROOT
+options BOOTP_NFSV3
+options BOOTP_WIRED_TO=arge0
+options BOOTP_COMPAT
+options ROOTDEVNAME=\"nfs:10.1.1.16/data/apx1.cicely.de\"
+
Index: std.AR934X
===================================================================
--- std.AR934X (revision 332885)
+++ std.AR934X (working copy)
@@ -27,12 +27,17 @@
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
-#options INET6 #InterNETworking
+options INET6 #InterNETworking
options TCP_HHOOK # hhook(9) framework for TCP
#options NFSCL #Network Filesystem Client
options PSEUDOFS #Pseudo-filesystem framework
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+options NFSCL # Network Filesystem Client
+options NFSD # Network Filesystem Server
+options NFSLOCKD # Network Lock Manager
+options NFS_ROOT # NFS usable as /, requires NFSCL
+
# PMC
options HWPMC_HOOKS
@@ -43,9 +48,9 @@
#options WITNESS
#options WITNESS_SKIPSPIN
options FFS #Berkeley Fast Filesystem
-#options SOFTUPDATES #Enable FFS soft updates support
+options SOFTUPDATES #Enable FFS soft updates support
#options UFS_ACL #Support for access control lists
-#options UFS_DIRHASH #Improve performance on big directories
+options UFS_DIRHASH #Improve performance on big directories
options NO_FFS_SNAPSHOT # We don't require snapshot support
include "std.AR_MIPS_BASE"
I created build/cfg/tl-wdr4300 based on wdr3600:
[182]cicely1# diff -u build/cfg/tl-wdr3600 build/cfg/tl-wdr4300
--- build/cfg/tl-wdr3600 2018-04-23 15:59:36.616020809 +0200
+++ build/cfg/tl-wdr4300 2018-04-23 18:07:13.158492990 +0200
@@ -5,8 +5,8 @@
# The configuration load/save script needs to know the
# configuration partition name and location.
-BIN_CFG_PARTITION="/dev/map/cfg"
-BIN_CFG_SIZE="65536"
+#BIN_CFG_PARTITION="/dev/map/cfg"
+#BIN_CFG_SIZE="65536"
RECOVERY_PIN="16"
RECOVERY_PIN_ACTIVE="0"
@@ -57,15 +57,15 @@
TPLINK_IMG_NAME="FreeBSD"
TPLINK_IMG_VERSION="FreeBSD-HEAD"
# New-style board config
-TPLINK_HARDWARE_ID=0x36000001
+TPLINK_HARDWARE_ID=0x43000001
TPLINK_HARDWARE_VER=1
TPLINK_HARDWARE_FLASHID=8M
TPLINK_FIRMWARE_RESERV=0x40000
# Building the firmware image
-X_BUILD_BUILD_IMG_DEFAULTS="fetchpkgs mfsroot makepkgs addpkgs fsimage tplink"
+X_BUILD_BUILD_IMG_DEFAULTS="fetchpkgs mfsroot makepkgs addpkgs tplink"
# Configuration file overrides
X_CFG_DEFAULT_ETHER="arge0"
X_CFG_DEFAULT_HOSTNAME="freebsd-tl-wdr3600"
-X_PACKAGELIST="dropbear dnsmasq lua lzo2 openvpn"
+#X_PACKAGELIST="dropbear dnsmasq lua lzo2 openvpn"
Initially I only changed the HARDWARE_ID, but it failed somewhere with
dropbear and since I didn't need that part, I'd disabled it.
Now my problems - and there are a few of them.
USB controller and the external USB hub are found, but the system didn't
notice when I plug an USB stick in.
Maybe neither da nor ugen is compiled in, have to reinstall the rootfs to test.
A freebsd-wifi-build commit mentions USB support was removed, so maybe the
config in the OS tree gets modified somewhere as da is within std.AR934X
The root/mips_ap/ tree lacks propper file properties (user, permission, ...),
even when build as root.
This is a minor issue to handle but anyway.
I think this problem also exists in my 2015 build.
Maybe I should create it with a standard cross build run instead?
Also missing was /bin/cc - there is no compiler and therefor I can't compile
any ports, but at least packages worked.
The 2015 build had a compiler in the tree.
devmatch coredumps:
devmatch: Can't read linker hints file.
Apr 23 20:22:57 apx1 kernel: BAD_PAGE_FAULT: pid 696 tid 100049 (devmatch), uid 0: pc 0x400e60 got a read fault (type 0x2) at 0
Apr 23 20:22:57 apx1 kernel: Trapframe Register Dump:
Apr 23 20:22:57 apx1 kernel: zero: 0 at: 0 v0: 0xfffffffffffffffc v1: 0
Apr 23 20:22:57 apx1 kernel: a0: 0x7fffeabc a1: 0x40441968 a2: 0x404419c8 a3: 0x404417a8
Apr 23 20:22:57 apx1 kernel: t0: 0 t1: 0 t2: 0x4 t3: 0
Apr 23 20:22:57 apx1 kernel: t4: 0x5851f42d t5: 0x1 t6: 0x20 t7: 0x402398
Apr 23 20:22:57 apx1 kernel: t8: 0xd t9: 0x400e50 s0: 0x406123c4 s1: 0x4043a00a
Apr 23 20:22:57 apx1 kernel: s2: 0x4043a008 s3: 0x40441940 s4: 0x404419c8 s5: 0
Apr 23 20:22:57 apx1 kernel: s6: 0x410000 s7: 0x410000 k0: 0 k1: 0
Apr 23 20:22:57 apx1 kernel: gp: 0x41b130 sp: 0x7fffe898 s8: 0x410000 ra: 0x40144c
Apr 23 20:22:57 apx1 kernel: sr: 0xfc13 mullo: 0x5fd8 mulhi: 0xfd badvaddr: 0
Apr 23 20:22:57 apx1 kernel: cause: 0x8 pc: 0x400e60
Apr 23 20:22:57 apx1 kernel: Page table info for pc address 0x400e60: pde = 0x80f6f000, pte = 0xa01a2c5a
Apr 23 20:22:57 apx1 kernel: Dumping 4 words starting at pc address 0x400e60:
Apr 23 20:22:57 apx1 kernel: 8c620000 24630004 03e00008 ac830000
Apr 23 20:22:57 apx1 kernel: Page table info for bad address 0: pde = 0, pte = 0
Segmentation fault (core dumped)
Yes, there is no kernel.hints, even after renaming the kernel directory from
kernel.*WDR4300* to kernel.
Ethernet worked fine and also nfs rootfs worked well so far.
But there are no WiFi devices.
dmesg mentions none and net.wlan.devices doesn't exist.
Then I tried building stable, but it failed during the build itsself:
/usr/local/bin/mips-unknown-freebsd11.0-ld: Warning: libc.so.7.full uses -mhard-float (set by /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/crti.o), /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/libcompiler_rt.a(ffsdi2.o) uses -msoft-float
/usr/local/bin/mips-unknown-freebsd11.0-ld: Warning: libc.so.7.full uses -mhard-float (set by /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/crti.o), /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/libcompiler_rt.a(floatunsidf.o) uses -msoft-float
/usr/local/bin/mips-unknown-freebsd11.0-ld: Warning: libc.so.7.full uses -mhard-float (set by /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/crti.o), /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/libcompiler_rt.a(fixunsdfsi.o) uses -msoft-float
/usr/local/bin/mips-unknown-freebsd11.0-ld: Warning: libc.so.7.full uses -mhard-float (set by /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/crti.o), /data/builder-new/builder/wdr-4300/11/../obj/mips_ap//mips.mips/data/builder-new/builder/wdr-4300/11/tmp/usr/lib/crtendS.o uses -msoft-float
collect2: error: ld returned 1 exit status
--- libc.so.7.full ---
*** [libc.so.7.full] Error code 1
make[4]: stopped in /data/builder-new/builder/wdr-4300/11/lib/libc
1 error
make[4]: stopped in /data/builder-new/builder/wdr-4300/11/lib/libc
--- lib/libc__L ---
*** [lib/libc__L] Error code 2
make[3]: stopped in /data/builder-new/builder/wdr-4300/11
1 error
make[3]: stopped in /data/builder-new/builder/wdr-4300/11
--- libraries ---
*** [libraries] Error code 2
make[2]: stopped in /data/builder-new/builder/wdr-4300/11
1 error
make[2]: stopped in /data/builder-new/builder/wdr-4300/11
--- _libraries ---
*** [_libraries] Error code 2
make[1]: stopped in /data/builder-new/builder/wdr-4300/11
1 error
make[1]: stopped in /data/builder-new/builder/wdr-4300/11
--- buildworld ---
*** [buildworld] Error code 2
make: stopped in /data/builder-new/builder/wdr-4300/11
1 error
make: stopped in /data/builder-new/builder/wdr-4300/11
202.912u 60.836s 3:26.91 127.4% 22727+876k 12+45659io 5482pf+0w
Exit 1
[67]cicely7# pwd
/data/builder-new/builder/wdr-4300/11
This is the dmesg with current, which was missing the WiFi devices:
U-Boot 1.1.4 (Jun 17 2013 - 12:31:57)
U-boot DB120
DRAM: 128 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment
PCIe Reset OK!!!!!!
In: serial
Out: serial
Err: serial
Net: ag934x_enet_initialize...
No valid address in Flash. Using fixed address
wasp reset mask:c03300
WASP ----> S17 PHY *
: cfg1 0x7 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
athrs17_reg_init: complete
eth0 up
eth0
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... OK
Starting kernel ...
ar934x_chip_detect_sys_frequency: mdio=100MHz
CPU platform: Atheros AR9344 rev 2
CPU Frequency=560 MHz
CPU DDR Frequency=450 MHz
CPU AHB Frequency=225 MHz
platform frequency: 560 MHz
CPU reference clock: 40 MHz
CPU MDIO clock: 100 MHz
arguments:
a0 = 00000007
a1 = a7f8ffb0
a2 = 08000000
a3 = 00000008
Cmd line:argv is invalid
Environment:
envp is invalid
Cache info:
picache_stride = 4096
picache_loopcount = 16
pdcache_stride = 4096
pdcache_loopcount = 8
max line size = 32
cpu0: MIPS Technologies processor v76.151
MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
L2 cache: disabled
Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config2=0x80001000
Config3=0x2c20<ULRI>
Config7=0x80000800<WII>
Physical memory chunk(s):
0x625000 - 0x7ffffff, 127774720 bytes (31195 pages)
Maxmem is 0x8000000
ar934x_chip_init_gmac: gmac_cfg=0x00000001
ar934x_configure_gmac: ETH_CFG=0x00000001
ar71xx: Overriding MAC from EEPROM
ar71xx: Board MAC: c4:e9:84:7d:cc:1a
ar71xx: devid 'ath.0', MAC offset '0'
hint.ath.0.macaddr => c4:e9:84:7d:cc:1a
ar71xx: devid 'ath.1', MAC offset '-1'
hint.ath.1.macaddr => c4:e9:84:7d:cc:19
ar71xx: devid 'arge.0', MAC offset '-2'
hint.arge.0.macaddr => c4:e9:84:7d:cc:18
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #2 r332885M: Mon Apr 23 19:36:21 CEST 2018
ticso@cicely7.cicely.de:/data/builder-new/builder/wdr-4300/obj/mips_ap/data/builder-new/builder/wdr-4300/head/mips.mips/sys/TL-WDR4300 mips
gcc version 6.3.0 (FreeBSD Ports Collection for mips)
Preloaded elf kernel "kernel" at 0x8061ec7c.
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x006b9000 - 0x07de1fff, 124948480 bytes (30505 pages)
avail memory = 124514304 (118MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
nfslock: pseudo-device
nexus0: <MIPS32 root nexus>
ar71xx_caldata: ar71xx_caldata0 already exists; skipping it
nexus0: failed to add child: ar71xx_caldata0
random: harvesting attach, 8 bytes (4 bits) from nexus0
ar71xx_caldata0 on nexus0
ar71xx_caldata0: map.0.ath_fixup_addr=0x1fff0000; size=16384
ar71xx_caldata0: EEPROM firmware: 0x1fff0000 @ 16384 bytes
firmware: 'ar71xx_caldata.0.map.0.eeprom_firmware' version 1: 16384 bytes loaded at 0xc086a000
ar71xx_caldata0: device EEPROM 'ar71xx_caldata.0.map.0.eeprom_firmware' registered
random: harvesting attach, 8 bytes (4 bits) from ar71xx_caldata0
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0
mdio0: <MDIO> on argemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
random: harvesting attach, 8 bytes (4 bits) from mdioproxy0
arswitch0: <Atheros AR8327 Ethernet Switch (ver 1 rev 4)> on mdio0
arswitch0: ar8327_fetch_pdata_port: port 0: speed=3, duplex=1, txpause=1, rxpause=1
arswitch0: ar8327_fetch_pdata_pad: pad 0: mode=6, rxclk_sel=0, txclk_sel=0, txclk_delay_sel=1, rxclk_delay_sel=2, txclk_delay_en=1, rxclk_enable_en=1, sgmii_delay_en=0, pipe_rxclk_sel=0
arswitch0: ar8327_phy_fixup: called; phy=0; chiprev=4
arswitch0: ar8327_phy_fixup: called; phy=1; chiprev=4
arswitch0: ar8327_phy_fixup: called; phy=2; chiprev=4
arswitch0: ar8327_phy_fixup: called; phy=3; chiprev=4
arswitch0: ar8327_phy_fixup: called; phy=4; chiprev=4
arswitch0: ar8327_atu_learn_default: TODO!
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0003, rev. 4
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0003, rev. 4
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0003, rev. 4
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0003, rev. 4
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy3
random: harvesting attach, 8 bytes (4 bits) from miibus3
miibus4: <MII bus> on arswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00c82e, model 0x0003, rev. 4
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy4
random: harvesting attach, 8 bytes (4 bits) from miibus4
etherswitch0: <Switch controller> on arswitch0
random: harvesting attach, 8 bytes (4 bits) from etherswitch0
mdio1: <MDIO> on arswitch0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
random: harvesting attach, 8 bytes (4 bits) from mdioproxy1
random: harvesting attach, 8 bytes (4 bits) from mdio1
random: harvesting attach, 8 bytes (4 bits) from arswitch0
random: harvesting attach, 8 bytes (4 bits) from mdio0
random: harvesting attach, 8 bytes (4 bits) from argemdio0
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0
mdio2: <MDIO> on argemdio1
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2
random: harvesting attach, 8 bytes (4 bits) from mdioproxy2
arswitch1: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio2
arswitch1: ar9340_hw_global_setup: GMII
arswitch1: ar9340_hw_global_setup: PHY4 - Local
miibus5: <MII bus> on arswitch1
ukphy5: <Generic IEEE 802.3u media interface> PHY 0 on miibus5
ukphy5: OUI 0x00c82e, model 0x0004, rev. 2
ukphy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy5
random: harvesting attach, 8 bytes (4 bits) from miibus5
miibus6: <MII bus> on arswitch1
ukphy6: <Generic IEEE 802.3u media interface> PHY 1 on miibus6
ukphy6: OUI 0x00c82e, model 0x0004, rev. 2
ukphy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy6
random: harvesting attach, 8 bytes (4 bits) from miibus6
miibus7: <MII bus> on arswitch1
ukphy7: <Generic IEEE 802.3u media interface> PHY 2 on miibus7
ukphy7: OUI 0x00c82e, model 0x0004, rev. 2
ukphy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy7
random: harvesting attach, 8 bytes (4 bits) from miibus7
miibus8: <MII bus> on arswitch1
ukphy8: <Generic IEEE 802.3u media interface> PHY 3 on miibus8
ukphy8: OUI 0x00c82e, model 0x0004, rev. 2
ukphy8: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy8
random: harvesting attach, 8 bytes (4 bits) from miibus8
miibus9: <MII bus> on arswitch1
ukphy9: <Generic IEEE 802.3u media interface> PHY 4 on miibus9
ukphy9: OUI 0x00c82e, model 0x0004, rev. 2
ukphy9: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy9
random: harvesting attach, 8 bytes (4 bits) from miibus9
etherswitch1: <Switch controller> on arswitch1
random: harvesting attach, 8 bytes (4 bits) from etherswitch1
mdio3: <MDIO> on arswitch1
mdioproxy3: <MII/MDIO proxy, MDIO side> on mdio3
random: harvesting attach, 8 bytes (4 bits) from mdioproxy3
random: harvesting attach, 8 bytes (4 bits) from mdio3
random: harvesting attach, 8 bytes (4 bits) from arswitch1
random: harvesting attach, 8 bytes (4 bits) from mdio2
random: harvesting attach, 8 bytes (4 bits) from argemdio1
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 280000000 Hz quality 800
Event timer "MIPS32" frequency 280000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart0
random: harvesting attach, 8 bytes (4 bits) from apb0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1b0010ff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from ehci0
pcib0 at irq 0 on nexus0
pcib0: ar724x_pci_slot_fixup: checking dev pcib0, 0/0/0
pcib0: found EEPROM at 0x1fff4000 on 0.0.0
pcib0: EEPROM firmware: 0x1fff4000 @ 16384 bytes
firmware: 'pcib.0.bus.0.0.0.eeprom_firmware' version 1: 16384 bytes loaded at 0xc0892000
pcib0: device EEPROM 'pcib.0.bus.0.0.0.eeprom_firmware' registered
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x168c, dev=0x0033, revid=0x01
domain=0, bus=0, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D1 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0, size 17, enabled
pci0: <network> at device 0.0 (no driver attached)
random: harvesting attach, 8 bytes (4 bits) from pci0
random: harvesting attach, 8 bytes (4 bits) from pcib0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC address from environment: 'c4:e9:84:7d:cc:18'
arge0: arge_fetch_pll_config: pll_1000 = 0x6000000
arge0: arge_attach: overriding MII mode to 'RGMII'
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null
arge0: bpf attached
arge0: Ethernet address: c4:e9:84:7d:cc:18
random: harvesting attach, 8 bytes (4 bits) from arge0
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: arge_attach: overriding MII mode to 'GMII'
arge1: Generating random ethernet address.
mii_attach_proxy: not attaching, no mdio device hint for arge1
arge1: finishing attachment, phymask 0000, proxy null
arge1: bpf attached
arge1: Ethernet address: 62:73:64:9c:90:ef
random: harvesting attach, 8 bytes (4 bits) from arge1
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type w25q64, size 8192K in 128 sectors of 64K, erase size 4K
random: harvesting attach, 8 bytes (4 bits) from mx25l0
random: harvesting attach, 8 bytes (4 bits) from spibus0
random: harvesting attach, 8 bytes (4 bits) from spi0
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
arswitch0port5: link state changed to DOWN
arswitch1port1: link state changed to DOWN
arswitch1port2: link state changed to DOWN
arswitch1port3: link state changed to DOWN
arswitch1port4: link state changed to DOWN
arswitch1port5: link state changed to DOWN
GEOM: new disk flash/spi0
MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/u-boot"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x20000, step 0x10000
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: flash/spi0: 20000x1b0000, data=0x1b0000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x20000, step 0x10000
MAP: flash/spi0: 1d0000x600000, data=0x600000 "/dev/map/rootfs"
MAP: flash/spi0: 7d0000x10000, data=0x10000 "/dev/map/cfg"
MAP: flash/spi0: 7e0000x10000, data=0x10000 "/dev/map/mib0"
MAP: flash/spi0: 7f0000x10000, data=0x10000 "/dev/map/ART"
bootpc_init: wired to interface 'arge0'
Sending DHCP Discover packet from interface arge0 (c4:e9:84:7d:cc:18)
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
arswitch0: arswitch_miipollstat: port 1: port -> UP
arswitch0port2: link state changed to UP
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0
Received DHCP Offer packet on arge0 from 10.1.1.16 (accepted)
uhub1: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub1
Sending DHCP Request packet from interface arge0 (c4:e9:84:7d:cc:18)
Received DHCP Ack packet on arge0 from 10.1.1.16 (accepted) (got root path)
arge0 at 10.1.1.129 server 10.1.1.16 server name cicely11.cicely.de boot file pxeboot
subnet mask 255.255.255.0 router 10.1.1.4 rootfs 10.1.1.16:/data/apx1.cicely.de/ hostname dyn1-129.cicely.de
Adjusted interface arge0
Trying to mount root from nfs: []...
NFS ROOT: 10.1.1.16:/data/apx1.cicely.de/
Warning: no time-of-day clock registered, system time will not be set accurately
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Interface arge0 IP-Address 10.1.1.129 Broadcast 10.1.1.255
Setting hostuuid: 1b19873c-1dd2-11b2-91a8-c4e9847dcc18.
Setting hostid: 0xe603710b.
No suitable dump device was found.
Starting file system checks:
random: unblocking device.
mount_nfs: can't update /var/db/mounttab for 10.1.1.16:/data/apx1.cicely.de
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Setting hostname: apx1.cicely.de.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
...
--
B.Walter <bernd@bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180423234020.GW85060>