Date: Wed, 31 Oct 2018 13:13:19 -0700 From: Steve Kargl <sgk@troutmask.apl.washington.edu> To: Johannes Lundberg <johalun0@gmail.com> Cc: freebsd-current@freeebsd.org, x11-list freebsd <freebsd-x11@freebsd.org> Subject: Re: drm2 again Message-ID: <20181031201319.GA896@troutmask.apl.washington.edu> In-Reply-To: <CAECmPwsPzF-bhF0AR9PjLUJoMD7xNF=usJEa3cpnFCSvuEJkuA@mail.gmail.com> References: <20181031172832.GA28293@troutmask.apl.washington.edu> <CAECmPwu3ndCzQa0S2hQHmyOoXQaZRAwaUjGGcApPEX3dZXH%2Byw@mail.gmail.com> <20181031194726.GA957@troutmask.apl.washington.edu> <CAECmPwsPzF-bhF0AR9PjLUJoMD7xNF=usJEa3cpnFCSvuEJkuA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 31, 2018 at 07:56:36PM +0000, Johannes Lundberg wrote: > > Whenever this happens your kernel is out of sync. The best when using > CURRENT is, like Niclas said, to build from source, either ports or the > github repo. > It was a 6-day old kernel. However, after rebuilding and installing a new kernel; and rebuilding and installing a graphics/drm-legacy-kmod, again. % dmesg | grep drm info: [drm] Initialized drm 1.1.0 20060810 drmn0: <Caicos [Radeon HD 6450]> on vgapci0 info: [drm] RADEON_IS_PCIE info: [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1092:0x6450). info: [drm] register mmio base: 0xFEA20000 info: [drm] register mmio size: 131072 info: [drm] radeon_atrm_get_bios: ===> Try ATRM... info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=6779 info: [drm] radeon_atrm_get_bios: Get ACPI device handle info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000 info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes) info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2F07 info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes) info: [drm] ATOM BIOS: C26401 drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF info: [drm] Detected VRAM RAM=1024M, BAR=256M info: [drm] RAM width 64bits DDR info: [drm] radeon: 1024M of VRAM memory ready info: [drm] radeon: 512M of GTT memory ready. info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. info: [drm] MSI enabled 1 message(s) drmn0: info: radeon: using MSI. info: [drm] radeon: irq initialized. info: [drm] GART: num cpu pages 131072, num gpu pages 131072 info: [drm] probing gen 2 caps for device 1002:5a16 = 2/0 info: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 info: [drm] Loading CAICOS Microcode error: [drm:pid109:ni_init_microcode] *ERROR* ni_cp: Failed to load firmware "radeon/CAICOS_pfp.bin" error: [drm:pid109:evergreen_startup] *ERROR* Failed to load firmware! drmn0: error: disabling GPU acceleration drmn0: warning: 0xfffff800061f8c00 unpin not necessary drmn0: warning: 0xfffff800061f8c00 unpin not necessary error: [drm:pid109:evergreen_init] *ERROR* radeon: MC ucode required for NI+. drmn0: error: Fatal error during GPU init info: [drm] radeon: finishing device. info: [drm] radeon: ttm finalized device_attach: drmn0 attach returned 22 -- Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20181031201319.GA896>