Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 9 Feb 2005 13:18:25 +0100
From:      Wilko Bulte <wb@freebie.xs4all.nl>
To:        Willy Offermans <W.K.Offermans@TUe.nl>
Cc:        freebsd-hardware@freebsd.org
Subject:   Re: NetMos NM9805 1284 Printer port
Message-ID:  <20050209121825.GA9807@freebie.xs4all.nl>
In-Reply-To: <20050209120827.GD39864@tom.chem.tue.nl>
References:  <20050209120827.GD39864@tom.chem.tue.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
I'll stick it in -current later today.

Wilko

-- 
Wilko Bulte				wilko@FreeBSD.org



On Wed, Feb 09, 2005 at 01:08:27PM +0100, Willy Offermans wrote..
> Dear FreeBSD friends,
> 
> I have sent the following e-mail 3 times before. I believe always to
> freebsd-hackers, but I'm not sure.
> 
> I'm running 5.3-RELEASE-p5 and downloaded the source yesterday. I
> compiled the source and it works great, believe me. My boss is so
> proud....
> 
> But I encounter a minor but annoying problem:
> 
> <<<this is begin of the old e-mail>>>>
> 
> I have an additional LPT port:
> 
> puc0@pci3:13:0: class=0x078000 card=0x00101000 chip=0x98059710 rev=0x01 hdr=0x00
>     vendor   = 'MosChip Semiconductors (Was: Netmos Technology)'
>     device   = 'Nm9805 PCI + 1284 Printer Port'
>     class    = simple comms
> 
> I was able to get it work by adding the following to /usr/src/sys/dev/puc/pucdata.c
> 
>          /* Added by Willy@Rompen.nl 06/05/2004 */
>          /* recommended by john@feith.com       */
> 
>          /* NetMos 0S1P PCI : 0S, 1P */
>          {   "NetMos NM9805 1284 Printer port",
>                  {   0x9710, 0x9805, 0,      0       },
>                  {   0xffff, 0xffff, 0,      0       },
>                  {
>                          { PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
>                  },
>          },
> 
> and to enable the puc driver in the kernel of course.
> 
> Is it possible to add the data to /usr/src/sys/dev/puc/pucdata.c permanently?
> 
> Thnx a lot,
> 
> <<<this is end of the old e-mail>>>>
> 
> This time I will sent it to three mailinglist at the same time, hoping
> that someone picks it up. I was also looking for the maintainer of the
> puc driver, but I couldn't figure out how to reach her or him.
> 
> -- 
> Met vriendelijke groeten,
> With kind regards,
> Mit freundlichen Gruessen,
> De jrus wah,
> 
> Willy
> 
> *************************************
> W.K. Offermans
> Eindhoven University of Technology
> Department of Chemical Engineering
> Laboratory of Catalysis (SKA)
> building ST-W 4.27, PO Box 513
> 5600 MB  Eindhoven, Netherlands
> Tel:    +31 40 247 37 81
> Fax:    +31 40 245 50 54
> Home:   +31 45 544 49 44
> Mobile: +31 653 119 666
> e-mail: w.k.offermans@tue.nl
> http://www.catalysis.nl
> 
>                                        Powered by ....
> 
>                                             (__)
>                                          \\\'',)
>                                            \/  \ ^
>                                            .\._/_)
> 
>                                        www.FreeBSD.org
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
--- end of quoted text ---

-- 
Wilko Bulte				wilko@FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050209121825.GA9807>