From owner-freebsd-bugs  Thu Feb 27 15:30:06 1997
Return-Path: <owner-bugs>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id PAA24170
          for bugs-outgoing; Thu, 27 Feb 1997 15:30:06 -0800 (PST)
Received: (from gnats@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id PAA24162;
          Thu, 27 Feb 1997 15:30:02 -0800 (PST)
Date: Thu, 27 Feb 1997 15:30:02 -0800 (PST)
Message-Id: <199702272330.PAA24162@freefall.freebsd.org>
To: freebsd-bugs
Cc: 
From: Steve Grandi <grandi@noao.edu>
Subject: Re: kern/2828: Adaptec 2940 Ultra cannot see Exabyte 8505 and loops during boot
Reply-To: Steve Grandi <grandi@noao.edu>
Sender: owner-bugs@FreeBSD.ORG
X-Loop: FreeBSD.org
Precedence: bulk

The following reply was made to PR kern/2828; it has been noted by GNATS.

From: Steve Grandi <grandi@noao.edu>
To: FreeBSD-gnats@freefall.freebsd.org, freebsd-bugs@freefall.freebsd.org
Cc:  Subject: Re: kern/2828: Adaptec 2940 Ultra cannot see Exabyte 8505 and loops during boot
Date: Thu, 27 Feb 1997 11:11:27 -0700 (MST)

 Rob Nelson <rob@mag-net.com> suggested that I tell the Adaptec BIOS to not
 try Wide transfers with the Exabyte.  I did as he suggested and Exabyte was
 found fine!  Thanks Rob!
 
 Steve Grandi, grandi@noao.edu
 
 
 FreeBSD 2.2-970225-GAMMA #0: Wed Feb 26 11:56:29 MST 1997
     grandi@new-www.tuc.noao.edu:/usr/src/sys/compile/WWW
 Calibrating clock(s) relative to mc146818A clock ... i586 clock: 199436527 Hz, i8254 clock: 1193211 Hz
 CPU: Pentium Pro (199.43-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x617  Stepping=7
   Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,<b11>,MTRR,PGE,MCA,CMOV>
 real memory  = 100663296 (98304K bytes)
 avail memory = 94969856 (92744K bytes)
 Probing for devices on PCI bus 0:
 chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
 ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:11
 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
 ahc0 waiting for scsi devices to settle
 (ahc0:1:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
 sd0(ahc0:1:0): Direct-Access 8681MB (17780058 512 byte sectors)
 (ahc0:2:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
 sd1(ahc0:2:0): Direct-Access 8681MB (17780058 512 byte sectors)
 (ahc0:3:0): "MICROP 3391SS P419" type 0 fixed SCSI 2
 sd2(ahc0:3:0): Direct-Access 8681MB (17780058 512 byte sectors)
 ahc0:A:5: refuses WIDE negotiation.  Using 8bit transfers
 (ahc0:5:0): "MATSHITA CD-ROM CR-506 8S04" type 5 removable SCSI 2
 cd0(ahc0:5:0): CD-ROM cd present [253530 x 2048 byte records]
 (ahc0:6:0): "EXABYTE EXB-85058SQANXR1 07T0" type 1 removable SCSI 2
 st0(ahc0:6:0): Sequential-Access density code 0x0,  drive empty
 vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 10 on pci0:15
 mii[*mii*] address 00:60:97:6e:a4:d6
 vga0 <VGA-compatible display device> rev 65 on pci0:17
 Probing for devices on the ISA bus:
 sc0 at 0x60-0x6f irq 1 on motherboard
 sc0: VGA color <16 virtual consoles, flags=0x0>
 sio0 at 0x3f8-0x3ff irq 4 on isa
 sio0: type 16550A
 sio1 at 0x2f8-0x2ff irq 3 on isa
 sio1: type 16550A
 sio2: disabled, not probed.
 sio3: disabled, not probed.
 lpt0 at 0x378-0x37f irq 7 on isa
 lpt0: Interrupt-driven port
 lp0: TCP/IP capable interface
 psm0 at 0x60-0x64 irq 12 on motherboard
 psm0: device ID 0
 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
 fdc0: NEC 72065B
 fd0: 1.44MB 3.5in
 npx0 on motherboard
 npx0: INT 16 interface
 apm0: disabled, not probed.
 changing root device to sd0a