From owner-freebsd-stable Mon Oct 23 22:40:15 2000 Delivered-To: freebsd-stable@freebsd.org Received: from sal1.yamalinfo.ru (sal1.yamalinfo.ru [195.133.157.9]) by hub.freebsd.org (Postfix) with ESMTP id 59AA737B4C5 for ; Mon, 23 Oct 2000 22:40:04 -0700 (PDT) Received: from vorob (mabalozi.yamalinfo.ru [195.133.157.7]) by sal1.yamalinfo.ru (8.9.3/8.9.3) with ESMTP id LAA70268; Tue, 24 Oct 2000 11:39:49 +0600 (YEKST) (envelope-from vorob@yamalinfo.ru) Date: Tue, 24 Oct 2000 11:39:48 +0600 From: Yuri Vorobyev X-Mailer: The Bat! (v1.46d) Reply-To: Yuri Vorobyev X-Priority: 3 (Normal) Message-ID: <7889383446.20001024113948@yamalinfo.ru> To: "Justin T. Gibbs" Cc: freebsd-stable@FreeBSD.ORG Subject: Re[2]: some strange things with ahc In-reply-To: <200010232338.e9NNclw65674@aslan.scsiguy.com> References: <200010232338.e9NNclw65674@aslan.scsiguy.com> Mime-Version: 1.0 Content-Type: text/plain; charset=Windows-1251 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! вторник, 24 октября 2000 г., you wrote: >>Hello! >> >> After last cvsup i noticed a strange things in dmesg: JTG> Boot -v and send me the complete dmesg output. That should tell me JTG> what is going on. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-STABLE #6: Mon Oct 16 20:45:14 YEKST 2000 root@www.yamalinfo.ru:/usr/src/sys/compile/WWW Calibrating clock(s) ... TSC clock: 198649991 Hz, i8254 clock: 1193093 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium Pro (198.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xf9ff real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002ac000 - 0x03ff7fff, 64274432 bytes (15692 pages) avail memory = 62734336 (61264K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd8c0 bios32: Entry = 0xfd8d0 (c00fd8d0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xd8f1 pnpbios: Found PnP BIOS data at 0xc00fa860 pnpbios: Entry = f0000:a960 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc0293000. Pentium Pro MTRR support enabled Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086) pcib0: on motherboard found-> vendor=0x8086, dev=0x1237, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1229, revid=0x02 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fe9fe000, size 12 map[14]: type 1, range 32, base 0000f800, size 5 map[18]: type 1, range 32, base fe800000, size 20 found-> vendor=0x9004, dev=0x8078, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000fc00, size 8 map[14]: type 1, range 32, base fe9ff000, size 12 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x1013, dev=0x00a0, revid=0x22 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f7000000, size 24 pci0: on pcib0 Correcting Natoma config for non-SMP Correcting Natoma config for non-SMP fxp0: port 0xf800-0xf81f mem 0xfe800000-0xfe8fffff,0xfe9fe000-0xfe9fefff irq 9 at device 10.0 on pci0 fxp0: Ethernet address 00:a0:c9:55:f1:4c bpf: fxp0 attached ahc0: port 0xfc00-0xfcff mem 0xfe9ff000-0xfe9fffff irq 11 at device 13.0 on pci0 ahc0: Reading SEEPROM...checksum error ahc0: No SEEPROM available. ahc0: Using left over BIOS settings ahc0: Downloading Sequencer Program... 437 instructions downloaded aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs isab0: at device 18.0 on pci0 I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks Extended BIOS: enabled Lower BIOS: enabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: disabled, B: IRQ9, C: IRQ11, D: disabled MB0: IRQ15, MB1: isa0: on isab0 pci0: (vendor=0x8086, dev=0x7010) at 18.1 pci0: (vendor=0x1013, dev=0x00a0) at 20.0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors 2:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, unlimited logging bpf: ppp0 attached new masks: bio 680040, tty 63001a, net 67021a bpf: sl0 attached bpf: lo0 attached Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (ahc0:A:4:0): Sending SDTR period 19, offset f (ahc0:A:4:0): Received SDTR period 19, offset f Filtered to period 19, offset f ahc0: target 4 synchronous at 10.0MHz, offset = 0xf (ahc0:A:2:0): Sending SDTR period 19, offset f (ahc0:A:2:0): Received SDTR period 19, offset f Filtered to period 19, offset f ahc0: target 2 synchronous at 10.0MHz, offset = 0xf (ahc0:A:1:0): Sending SDTR period 19, offset f (ahc0:A:1:0): Received SDTR period 19, offset f Filtered to period 19, offset f ahc0: target 1 synchronous at 10.0MHz, offset = 0xf Creating DISK da0 Creating DISK da1 Creating DISK da2 pass0 at ahc0 bus 0 target 1 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number JK2938200WVMGW pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 2 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number JK3099450WB5TF pass1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 4 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number 00394917 pass2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0 at ahc0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number JK2938200WVMGW da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C) da1 at ahc0 bus 0 target 2 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number JK3099450WB5TF da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C) da2 at ahc0 bus 0 target 4 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number 00394917 da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da2: 2049MB (4197405 512 byte sectors: 64H 32S/T 2049C) Mounting root from ufs:/dev/da0s1a da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK start_init: trying /sbin/init da2s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK da2s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK -- Yuri Vorobyev vorob@yamalinfo.ru www.yamalinfo.ru +7-34922-47791 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message