Date: Thu, 19 Oct 2006 16:28:38 +0200 From: Marc =?iso-8859-1?q?L=F6rner?= <marc.loerner@hob.de> To: freebsd-ia64@freebsd.org Subject: Installing FreeBSD 6.1 on a Montecito Machine Message-ID: <200610191628.38607.marc.loerner@hob.de>
next in thread | raw e-mail | index | archive | help
Hello,
I want to install FreeBSD on an machine with Montecito processors.
So I installed a serial console and switched hw.uart.console to right port.
After that I want to boot from CD and load the install program.
My problem is that the machine/output hangs after trying to mount root from
ufs:/dev/md0.
Does anyone know where the error could be or what I've forgotten?!?
Below you can see the output:
Skipping memory chunk start 0x100000000
Skipping memory chunk start 0x280000000
Skipping memory chunk start 0x2ff000000
Skipping memory chunk start 0x2ff801000
Skipping memory chunk start 0x2ff894000
Skipping memory chunk start 0x2ffa00000
Skipping memory chunk start 0x2ffe00000
Skipping memory chunk start 0x2ffe80000
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:43:05 UTC 2006
root@pluto2.freebsd.org:/usr/obj/usr/src/sys/GENERIC
CPU: unknown (1396.22-Mhz unknown)
Origin = "GenuineIntel" Revision = 3
Features = 0x5<LB,AO>
real memory = 2103762944 (2006 MB)
avail memory = 1977393152 (1885 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000002ffe62050
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: SAPIC Id=c3, SAPIC Eid=18 (BSP)
acpi0: <INTEL SR870BN4> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.31.INTA
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x4cc0-0x4cdf irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x4ce0-0x4cff irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf9ff0000-0xf9ff03ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x5cc0-0x5cff mem 0xfbfe0000-0xfbffffff irq 18 at device 0.0 on pci1
em0: Ethernet address: 00:0e:0c:30:76:a1
pci1: <display, VGA> at device 1.0 (no driver attached)
pci0: <bridge, PCI-ISA> at device 31.0 (no driver attached)
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f irq 0 at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pci3: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci6: <ACPI PCI bus> on pcib4
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8800-0x88ff mem
0xf8fd0000-0xf8fdffff,0xf8fc0000-0xf8fcffff irq 28 at device 2.0 on pci6
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.9.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x8c00-0x8cff mem
0xf8ff0000-0xf8ffffff,0xf8fe0000-0xf8feffff irq 29 at device 2.1 on pci6
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.9.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
pci6: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
pcib5: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib5
pci9: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci9
pci10: <ACPI PCI bus> on pcib6
pci10: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
pci9: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib7: <ACPI PCI-PCI bridge> at device 31.0 on pci9
pci12: <ACPI PCI bus> on pcib7
pci12: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
pcib8: <ACPI Host-PCI bridge> on acpi0
pci15: <ACPI PCI bus> on pcib8
pci15: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib9: <ACPI PCI-PCI bridge> at device 29.0 on pci15
pci16: <ACPI PCI bus> on pcib9
pci16: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
pci15: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib10: <ACPI PCI-PCI bridge> at device 31.0 on pci15
pci18: <ACPI PCI bus> on pcib10
pci18: <base peripheral, PCI hot-plug controller> at device 31.0 (no driver
attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: console (115200,n,8,1)
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004b0bfc8
acd0: DVDROM <MATSHITADVD-ROM SR-8177/NZ19> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M17 1.0B> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <MAXTOR ATLAS10K4_73SCA DFL0> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 70149MB (143666192 512 byte sectors: 255H 63S/T 8942C)
SMP: 4 CPUs found; 1 CPUs usable; 1 CPUs woken
Trying to mount root from ufs:/dev/md0
And when I'm booting with option "-h" following last line above is:
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
Kind regards,
Marc Loerner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610191628.38607.marc.loerner>