Date: Fri, 18 Oct 2002 19:31:07 -0500 From: David Loszewski <stealth215@attbi.com> To: freebsd-questions <freebsd-questions@freebsd.org> Subject: problem with network cards in server, plz help Message-ID: <3DB0A7CB.6010601@attbi.com>
next in thread | raw e-mail | index | archive | help
I have two different cards on my Netfinity 5000 server, a pci Netgear FA311 (showing up as a NatSemi (sis0), and the onboard network card which seems to have an AMD chipset (pcn0). If I have the onboard ethernet card enabled at all and have an active cable connected to it and restart the computer it comes up on ukphy0, turns the pci error light on and I get no internet access which it later makes the computer reboot automatically without any warning. If I disable that card and put in a PCI Netgear card, have also tried other cards such as Intel or IBM cards, once in a while it will boot normally but every once in a while it will get hung up on the ukphy0 as well, giving me the same problem as the onboard network and reboot itself. At first I thought it was an IRQ problem but all of my devices now have individual IRQ's set in the bios and I'm still having this problem. I'm afraid to reboot this thing because I'm afraid it won't be coming back up. Below are from my dmesg, the first is when I have my onboard ethernet enabled and the second is when I have the netgear installed. Any help would be much appreciated on what to do with this problem. By the way....I'm running on FreeBSD 4.6.2 but also have this problem running 4.7, I it also usually hangs on the driver initialization during installation of the os. Dave Oct 4 21:11:36 hermes /kernel: pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x2180-0 x219f mem 0xfebfdc00-0xfebfdc1f irq 10 at device 9.0 on pci0 Oct 4 21:11:36 hermes /kernel: pcn0: Ethernet address: 00:06:29:39:bf:a9 Oct 4 21:11:36 hermes /kernel: miibus0: <MII bus> on pcn0 Oct 4 21:11:36 hermes /kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus0 Oct 4 21:11:36 hermes /kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100bas eTX-FDX, auto pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 sis0: <NatSemi DP83815 10/100BaseTX> port 0x4b00-0x4bff mem 0xc0fdf000-0xc0fdffff irq 5 at device 4.0 on pci1 sis0: Ethernet address: 00:a0:cc:76:d9:f1 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DB0A7CB.6010601>