From owner-freebsd-questions Thu Feb 23 03:34:26 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id DAA29727 for questions-outgoing; Thu, 23 Feb 1995 03:34:26 -0800 Received: from ibmPCUG.CO.UK (mmdf@DNS0.IBMPCUG.CO.UK [192.68.174.71]) by freefall.cdrom.com (8.6.9/8.6.6) with SMTP id DAA29720 for ; Thu, 23 Feb 1995 03:34:22 -0800 From: jake@ibmPCUG.CO.UK Received: from kate.ibmpcug.co.uk by alice.ibmPCUG.CO.UK id aa15760; 23 Feb 95 11:16 GMT Subject: Re: Adaptec 2940 install problem To: Wen-Jer Chang Date: Thu, 23 Feb 1995 11:16:08 +0000 (GMT) Cc: questions@FreeBSD.org In-Reply-To: <9502230340.AA00948@carti004.cos.titan.com> from "Wen-Jer Chang" at Feb 22, 95 09:40:22 pm X-Mailer: ELM [version 2.4 PL2] Content-Type: text Content-Length: 1024 Message-ID: <9502231116.aa07813@kate.ibmpcug.co.uk> Sender: questions-owner@FreeBSD.org Precedence: bulk > ahc0 int a irq 10 on PCI0:15 > ahc0: reading board settings > acho: 294x single channel, SCSI Id=7, 16 SCBs > ahc0: Downloading Sequencer Program...Done > ahc0: Probing channel A > ahc0 waiting for SCSI devices to settle > ahc0: target 1 synchronous at 10.0 MB/s, offset=0xf > ahc0 targ 1 lun 0: type 0(direct) fixed SCSI2 > ahc0 targ 1 lun 0: > And the computer stops here forever. > I tried to disable cache memory (external & internal) but no use. > My Hard drive is SCSI #1 and CD-ROM is #5. My Adaptec card is #7. > Please take a look at this. I get this problem a lot but I also get a successful boot sometimes after which everything is fine, until the next power down (reboots are ok) I have used scsiselect to wind down and turn off practically everything. I use 5.0MB/s across all IDs and have turned off both auto-disconect and sync negotiation I dont have an extrnal device so card termination is on. Regards Jake Dias PC User Group, UK