Date: Sat, 1 Apr 2017 12:06:31 +0200 From: Rasmus Liland <jensrasmus@gmail.com> To: Jan Sieka <jan.sieka@gmail.com>, Mori Hiroki <yamori813@yahoo.co.jp>, freebsd-arm <freebsd-arm@freebsd.org> Subject: [SOLUTION] DB-88F6XXX kernel on 88F6281_A0 (GoFlex Net) Message-ID: <20170401100631.GA29011@jrl.uk.to> In-Reply-To: <20170331234216.GA16657@jrl.uk.to> References: <20170330232907.GA21389@jrl.uk.to> <888745.43951.qm@web101706.mail.ssk.yahoo.co.jp> <20170331094127.GA29618@jrl.uk.to> <CAGeh=dV5ZM_rS7eYE3vSc=86rG=6=RpPqA_YSg1%2By8fLG_g02Q@mail.gmail.com> <20170331111538.GB31398@jrl.uk.to> <20170331234216.GA16657@jrl.uk.to>
next in thread | previous in thread | raw e-mail | index | archive | help
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
On 2017-04-01 01:42 +0200, Rasmus Liland wrote:
>
> Unable to calculate the addresses myself, I found in U-boot
> already stated address variables of Linux kernel /boot/uImage and
> ramdisk /uInitrd to be respecively addr_kern=0x680000, and
> addr_rd=0x1100000, which is an offset of 5568KiB.
>
> As stated earlier, it is possible to load kernel.bin from address
> 0x600000, perhaps 0x680000 is just enough. Will try this,
> reporting back in some hours.
GUYS!!!
IT'S BOOTING!!!
The proper way of booting is:
· Taking the DOCKSTAR kernel, ripping out the IPSEC_NAT_T to
make it compile at all (why this module does not compile on
TARGET_ARCH=arm despite being enabled in this stock kernel I
do not know)
· Loading resulting kernel.bin to address 0x1100000, which is
the address already defined in $addr_rd to normally load the
Linux ramdisk uInitrd
/Rasmus
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="success_DOCKSTAR.diff"
--- DOCKSTAR 2017-03-31 12:30:26.752632000 +0200
+++ DOCKSTARWOIPSECNATT 2017-04-01 10:33:02.845141000 +0200
@@ -118,7 +118,6 @@
# IPSec
device enc
options IPSEC
-options IPSEC_NAT_T
options TCP_SIGNATURE # include support for RFC 2385
# IPFW
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="success_dmesg.txt"
Marvell>> dhcp
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 10.6.6.26
*** Warning: no boot file name; using '0A06061A.img'
Using egiga0 device
TFTP from server 10.6.6.1; our IP address is 10.6.6.26
Filename '0A06061A.img'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Marvell>> printenv addr_rd
addr_rd=0x1100000
Marvell>> tftpboot $addr_rd dockstarwoipsecnatt
Using egiga0 device
TFTP from server 10.6.6.1; our IP address is 10.6.6.26
Filename 'dockstarwoipsecnatt'.
Load address: 0x1100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###########################################################
done
Bytes transferred = 6587876 (6485e4 hex)
Marvell>> go $addr_rd
## Starting application at 0x01100000 ...
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r316330: Sat Apr 1 10:45:38 CEST 2017
root@node:/usr/obj/arm.arm/usr/src/stable/11/sys/DOCKSTARWOIPSECNATT arm
FreeBSD clang version 3.9.1 (tags/RELEASE_391/final 289601) (based on LLVM 3.9.1)
CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
Little-endian DC enabled IC disabled WA disabled DC streaming enabled
BTB disabled L2 enabled L2 prefetch enabled
WB enabled LABT branch prediction disabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 134213632 (127 MB)
avail memory = 122802176 (117 MB)
SOC: Marvell 88F6281 rev A1, TClock 200MHz
Instruction cache prefetch disabled, data cache prefetch disabled
256KB 4-way set-associative write-through unified L2 cache
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
localbus0: <Marvell device bus> on ofwbus0
ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on simplebus0
timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 1 on simplebus0
Event timer "CPUTimer0" frequency 200000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 200000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 35,36,37,38,39,40,41 on simplebus0
rtc0: <Marvell Integrated RTC> mem 0x10300-0x10307 on simplebus0
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 43 on simplebus0
iicbus0: <Philips I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq 12,13,14,11,46 on simplebus0
mge0: PHY0 attached, phy_sc points to mge0
mge0: Ethernet address: 00:10:75:26:68:44
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
uart0: <16550 or compatible> mem 0x12000-0x1201f irq 33 on simplebus0
uart0: console (1056,n,8,1)
uart1: <16550 or compatible> mem 0x12100-0x1211f irq 34 on simplebus0
cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x30000-0x30fff,0x3d000-0x3dfff irq 22 on simplebus0
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x50000-0x50fff irq 48,19 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from ufs:/dev/da0s1a []...
Root mount waiting for: usbus0
ugen0.1: <Marvell EHCI root HUB> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/da0s1a...
Mounting from ufs:/dev/da0s1a failed with error 19.
Loader variables:
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:tank
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot>
--X1bOJ3K7DJ5YkBrT--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170401100631.GA29011>