Date: Wed, 4 Apr 2012 22:02:04 +0930 From: Matt Thyer <matt.thyer@gmail.com> To: Gary Palmer <gpalmer@freebsd.org> Cc: Garrett Cooper <yanegomi@gmail.com>, freebsd-scsi@freebsd.org, freebsd-current@freebsd.org, "Kenneth D. Merry" <ken@freebsd.org>, Steven Hartland <killing@multiplay.co.uk> Subject: Re: LSI supported mps(4) driver available Message-ID: <CACM2%2B-5Yb1RskTW1kLWD0dY%2BOrB032Fq7Uq1gvShuJh9bT3Pmg@mail.gmail.com> In-Reply-To: <20120403134221.GA87802@in-addr.com> References: <20120120204459.GA51162@nargothrond.kdm.org> <72898EA27A61484885D72A06BD9CECE8@multiplay.co.uk> <20120120232841.GA71874@nargothrond.kdm.org> <CACM2%2B-7gwPoK9kFkqWrZoE=T9DHJG46Y9kRrYdiUOH3rYLD1tA@mail.gmail.com> <CAGH67wT9L-2dbvJiKmts3KzYQOtgRRSpm_9N_ThgyjbbjAb91g@mail.gmail.com> <CACM2%2B-4LSz8CYy3NvrkjY5NjkV_wH60VeG5uXR11Es3wi2f6ow@mail.gmail.com> <20120326132558.GB76647@in-addr.com> <CACM2%2B-4H1jc97UrJL2dgYfo2R1hyS4S3ObzOsa%2BqX_yrnHxkqg@mail.gmail.com> <CACM2%2B-4Dxui-pf6WEm=H04weUo1y-izseaaTqpb2fnf%2BFXB5hA@mail.gmail.com> <20120403134221.GA87802@in-addr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3 April 2012 23:12, Gary Palmer <gpalmer@freebsd.org> wrote: > On Tue, Apr 03, 2012 at 10:52:25PM +0930, Matt Thyer wrote: > > I forgot to mention that I'm still having problems after this phase 11 > > firmware upgrade with the 6 Gbps drive being kicked out of the raidz2 > with > > write errors (even though a SMART full surface test says the drive is > OK). > > > > This leads me to think that both the old and new drivers have a problem > > with the 6 Gbps WD20EARX-00P AB51 drive. > > > > Now that the 6 Gbps drive is on the Intel SATA controller things seem OK > > but it's a bit early to tell. > > > > Stay tuned! > > I think you should contact either SuperMicro or LSI and open a support > case as it looks like there could be a problem with either the controller > or the firmware when presented with mixed speed devices. Either way I > think > this needs to be escalated to the manufacturer. > > Regards, > > Gary > I'm now having no problems since moving the SATA 3 drive to the on board Intel controller. I'll try to report this to Super Micro & LSI.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACM2%2B-5Yb1RskTW1kLWD0dY%2BOrB032Fq7Uq1gvShuJh9bT3Pmg>