From owner-freebsd-newbies Mon Apr 30 4:30:28 2001 Delivered-To: freebsd-newbies@freebsd.org Received: from mail.xmission.com (mail.xmission.com [198.60.22.22]) by hub.freebsd.org (Postfix) with ESMTP id 1E91437B423 for ; Mon, 30 Apr 2001 04:29:59 -0700 (PDT) (envelope-from rootman@xmission.com) Received: from [166.70.9.150] (helo=blackmirror.xmission.com) by mail.xmission.com with smtp (Exim 3.12 #1) id 14uBsG-0003h4-00; Mon, 30 Apr 2001 05:29:52 -0600 From: Joe Warner To: KP , freebsd-newbies@freebsd.org Subject: Re: Install problems (DFE-530TX+, fd0, config> di fe0, and more. Date: Mon, 30 Apr 2001 05:23:16 -0600 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain; charset="us-ascii" References: <20010430061116.24936.qmail@web3306.mail.yahoo.com> In-Reply-To: <20010430061116.24936.qmail@web3306.mail.yahoo.com> MIME-Version: 1.0 Message-Id: <01043005292901.00258@blackmirror.xmission.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-newbies@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Keith, FreeBSD-Newbies isn't for asking technical questions such as this. I've forwarded this to FreeBSD-Questions. You should get better results from them. Thanks Joe On Mon, 30 Apr 2001, KP wrote: > First, I want to thank the people that respond to my > call for help. Thank you. > > Keith Proffitt > keith_proffitt@yahoo.com > > -------- > My system is: > > OS = FreeBSD 4.2-RELEASE #0 > > HD = 3052MB [11024/9/63] > > CPU = Pentium/P54C (199.43-MHz 586-class CPU) > > Memory = 64MB > > Videocard = Diamond’s Stealth III S540 > > NIC = DLink DFE-530TX+ (I have read people saying rl > is the driver for this.) > > CDROM = Mitsumi CRMC-FX820S > > Mouse = PS/2 (logitec wheel mouse) > > Soundcard = Opti soundcard. > > No SCSI or USB device > --------- > > I am extremely new to any *NIX OS (brought up on MS). > I need to know how to config the kernal to see > (identify) the DLink DFE-530TX+ NIC and load the > proper device driver (rl ???). > > My attempts have been to re-install the OS several > times, modify the rc.conf file, and compile a > cutomized kernel. All have failed and caused other > problems. > > Below is the dmesg output, messages log, and kernel > configuration file. Again, thanks for any help. > > ------------- > DMESG > ------------- > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. All > rights reserved. > FreeBSD 4.2-RELEASE #0: Sun Apr 29 14:47:49 PDT 2001 > root@:/usr/src/sys/compile/YHVH > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium/P54C (199.43-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping = 12 > Features=0x1bf > real memory = 67108864 (65536K bytes) > config> di sn0 > config> di lnc0 > config> di ie0 > config> di fe0 > No such device: fe0 > Invalid command or syntax. Type `?' for help. > config> di ed0 > No such device: ed0 > Invalid command or syntax. Type `?' for help. > config> di cs0 > config> q > avail memory = 62513152 (61048K bytes) > Preloaded elf kernel "kernel" at 0xc02d9000. > Preloaded userconfig_script "/boot/kernel.conf" at > 0xc02d909c. > Intel Pentium detected, installing workaround for F00F > bug > md0: Malloc disk > npx0: on motherboard > npx0: INT 16 interface > pcib0: on motherboard > pci0: on pcib0 > isab0: at device 7.0 > on pci0 > isa0: on isab0 > atapci0: port > 0xf000-0xf00f at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > pci0: (vendor=0x1186, dev=0x1300) at > 17.0 irq 10 > pci0: at 18.0 irq 11 > fdc0: at port 0x3f0-0x3f5,0x3f7 > irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: at port > 0x60,0x64 on isa0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model MouseMan+, device ID 0 > vga0: at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 > sio1: configured irq 3 not in bitmap of probed irqs 0 > ppc0: at port 0x378-0x37f irq 7 on > isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > ad0: 3052MB [11024/9/63] at > ata0-master WDMA2 > acd0: CDROM at ata0-slave using PIO3 > Mounting root from ufs:/dev/ad0s1a > cd9660: RockRidge Extension > fd0c: hard error reading fsbn 0 of 0-3 (No status) > fd0c: hard error writing fsbn 7 of 7-9 (No status) > fd0c: hard error writing fsbn 16 of 16-18 (No status) > fd0c: hard error writing fsbn 19 (No status) > fd0c: hard error writing fsbn 2127 (No status) > fd0c: hard error writing fsbn 2127 (No status) > fd0c: hard error writing fsbn 2127 (No status) > > ------------- > messages log > ------------- > Apr 29 16:23:38 /kernel: Copyright (c) 1992-2000 The > FreeBSD Project. > Apr 29 16:23:38 /kernel: Copyright (c) 1979, 1980, > 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > Apr 29 16:23:38 /kernel: The Regents of the > University of California. All rights reserved. > Apr 29 16:23:38 /kernel: FreeBSD 4.2-RELEASE #0: Sun > Apr 29 14:47:49 PDT 2001 > Apr 29 16:23:38 /kernel: > root@:/usr/src/sys/compile/YHVH > Apr 29 16:23:38 /kernel: Timecounter "i8254" > frequency 1193182 Hz > Apr 29 16:23:38 /kernel: CPU: Pentium/P54C > (199.43-MHz 586-class CPU) > Apr 29 16:23:38 /kernel: Origin = "GenuineIntel" Id > = 0x52c Stepping = 12 > Apr 29 16:23:38 /kernel: > Features=0x1bf > Apr 29 16:23:38 /kernel: real memory = 67108864 > (65536K bytes) > Apr 29 16:23:38 /kernel: config> di sn0 > Apr 29 16:23:38 /kernel: config> di lnc0 > Apr 29 16:23:38 /kernel: config> di ie0 > Apr 29 16:23:38 /kernel: config> di fe0 > Apr 29 16:23:38 /kernel: No such device: fe0 > Apr 29 16:23:38 /kernel: Invalid command or syntax. > Type `?' for help. > Apr 29 16:23:38 /kernel: config> di ed0 > Apr 29 16:23:38 /kernel: No such device: ed0 > Apr 29 16:23:38 /kernel: Invalid command or syntax. > Type `?' for help. > Apr 29 16:23:38 /kernel: config> di cs0 > Apr 29 16:23:38 /kernel: config> q > Apr 29 16:23:38 /kernel: avail memory = 62513152 > (61048K bytes) > Apr 29 16:23:38 /kernel: Preloaded elf kernel > "kernel" at 0xc02d9000. > Apr 29 16:23:38 /kernel: Preloaded userconfig_script > "/boot/kernel.conf" at 0xc02d909c. > Apr 29 16:23:38 /kernel: Intel Pentium detected, > installing workaround for F00F bug > Apr 29 16:23:38 /kernel: md0: Malloc disk > Apr 29 16:23:38 /kernel: npx0: on > motherboard > Apr 29 16:23:38 /kernel: npx0: INT 16 interface > Apr 29 16:23:38 /kernel: pcib0: > on motherboard > Apr 29 16:23:38 /kernel: pci0: on pcib0 > Apr 29 16:23:38 /kernel: isab0: ISA bridge> at device 7.0 on pci0 > Apr 29 16:23:38 /kernel: isa0: on isab0 > Apr 29 16:23:38 /kernel: atapci0: controller> port 0xf000-0xf00f at device 7.1 on pci0 > Apr 29 16:23:38 /kernel: ata0: at 0x1f0 irq 14 on > atapci0 > Apr 29 16:23:38 /kernel: pci0: > (vendor=0x1186, dev=0x1300) at 17.0 irq 10 > Apr 29 16:23:38 /kernel: pci0: accelerator> at 18.0 irq 11 > Apr 29 16:23:38 /kernel: fdc0: > at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > Apr 29 16:23:38 /kernel: fdc0: FIFO enabled, 8 bytes > threshold > Apr 29 16:23:38 /kernel: fd0: <1440-KB 3.5" drive> on > fdc0 drive 0 > Apr 29 16:23:38 /kernel: atkbdc0: controller (i8042)> at port 0x60,0x64 on isa0 > Apr 29 16:23:38 /kernel: atkbd0: flags > 0x1 irq 1 on atkbdc0 > Apr 29 16:23:38 /kernel: kbd0 at atkbd0 > Apr 29 16:23:38 /kernel: psm0: irq 12 on > atkbdc0 > Apr 29 16:23:38 /kernel: psm0: model MouseMan+, > device ID 0 > Apr 29 16:23:38 /kernel: vga0: at > port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Apr 29 16:23:38 /kernel: sc0: at > flags 0x100 on isa0 > Apr 29 16:23:38 /kernel: sc0: VGA <16 virtual > consoles, flags=0x300> > Apr 29 16:23:38 /kernel: sio0: configured irq 4 not > in bitmap of probed irqs 0 > Apr 29 16:23:38 /kernel: sio0 at port 0x3f8-0x3ff irq > 4 flags 0x10 on isa0 > Apr 29 16:23:38 /kernel: sio0: type 8250 > Apr 29 16:23:38 /kernel: sio1: configured irq 3 not > in bitmap of probed irqs 0 > Apr 29 16:23:38 /kernel: ppc0: at > port 0x378-0x37f irq 7 on isa0 > Apr 29 16:23:38 /kernel: ppc0: Generic chipset > (NIBBLE-only) in COMPATIBLE mode > Apr 29 16:23:38 /kernel: plip0: interface> on ppbus0 > Apr 29 16:23:38 /kernel: lpt0: on ppbus0 > Apr 29 16:23:38 /kernel: lpt0: Interrupt-driven port > Apr 29 16:23:38 /kernel: ppi0: on > ppbus0 > Apr 29 16:23:38 /kernel: ad0: 3052MB SV0322A> [11024/9/63] at ata0-master WDMA2 > Apr 29 16:23:38 /kernel: acd0: CDROM at > ata0-slave using PIO3 > Apr 29 16:23:38 /kernel: Mounting root from > ufs:/dev/ad0s1a > Apr 29 16:27:55 login: ROOT LOGIN (root) ON ttyv0 > Apr 29 19:55:34 reboot: rebooted by root > Apr 29 19:55:35 syslogd: exiting on signal 15 > Apr 29 19:57:32 /kernel: Copyright (c) 1992-2000 The > FreeBSD Project. > Apr 29 19:57:32 /kernel: Copyright (c) 1979, 1980, > 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > Apr 29 19:57:32 /kernel: The Regents of the > University of California. All rights reserved. > Apr 29 19:57:32 /kernel: FreeBSD 4.2-RELEASE #0: Sun > Apr 29 14:47:49 PDT 2001 > Apr 29 19:57:32 /kernel: > root@:/usr/src/sys/compile/YHVH > Apr 29 19:57:32 /kernel: Timecounter "i8254" > frequency 1193182 Hz > Apr 29 19:57:32 /kernel: CPU: Pentium/P54C > (199.43-MHz 586-class CPU) > Apr 29 19:57:32 /kernel: Origin = "GenuineIntel" Id > = 0x52c Stepping = 12 > Apr 29 19:57:32 /kernel: > Features=0x1bf > Apr 29 19:57:32 /kernel: real memory = 67108864 > (65536K bytes) > Apr 29 19:57:32 /kernel: config> di sn0 > Apr 29 19:57:32 /kernel: config> di lnc0 > Apr 29 19:57:32 /kernel: config> di ie0 > Apr 29 19:57:32 /kernel: config> di fe0 > Apr 29 19:57:32 /kernel: No such device: fe0 > Apr 29 19:57:32 /kernel: Invalid command or syntax. > Type `?' for help. > Apr 29 19:57:32 /kernel: config> di ed0 > Apr 29 19:57:32 /kernel: No such device: ed0 > Apr 29 19:57:32 /kernel: Invalid command or syntax. > Type `?' for help. > Apr 29 19:57:32 /kernel: config> di cs0 > Apr 29 19:57:32 /kernel: config> q > Apr 29 19:57:32 /kernel: avail memory = 62513152 > (61048K bytes) > Apr 29 19:57:32 /kernel: Preloaded elf kernel > "kernel" at 0xc02d9000. > Apr 29 19:57:32 /kernel: Preloaded userconfig_script > "/boot/kernel.conf" at 0xc02d909c. > Apr 29 19:57:32 /kernel: Intel Pentium detected, > installing workaround for F00F bug > Apr 29 19:57:32 /kernel: md0: Malloc disk > Apr 29 19:57:32 /kernel: npx0: on > motherboard > Apr 29 19:57:32 /kernel: npx0: INT 16 interface > Apr 29 19:57:32 /kernel: pcib0: > on motherboard > Apr 29 19:57:32 /kernel: pci0: on pcib0 > Apr 29 19:57:32 /kernel: isab0: ISA bridge> at device 7.0 on pci0 > Apr 29 19:57:32 /kernel: isa0: on isab0 > Apr 29 19:57:32 /kernel: atapci0: controller> port 0xf000-0xf00f at device 7.1 on pci0 > Apr 29 19:57:32 /kernel: ata0: at 0x1f0 irq 14 on > atapci0 > Apr 29 19:57:32 /kernel: pci0: > (vendor=0x1186, dev=0x1300) at 17.0 irq 10 > Apr 29 19:57:32 /kernel: pci0: accelerator> at 18.0 irq 11 > Apr 29 19:57:32 /kernel: fdc0: > at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > Apr 29 19:57:32 /kernel: fdc0: FIFO enabled, 8 bytes > threshold > Apr 29 19:57:32 /kernel: fd0: <1440-KB 3.5" drive> on > fdc0 drive 0 > Apr 29 19:57:32 /kernel: atkbdc0: controller (i8042)> at port 0x60,0x64 on isa0 > Apr 29 19:57:32 /kernel: atkbd0: flags > 0x1 irq 1 on atkbdc0 > Apr 29 19:57:32 /kernel: kbd0 at atkbd0 > Apr 29 19:57:32 /kernel: psm0: irq 12 on > atkbdc0 > Apr 29 19:57:32 /kernel: psm0: model MouseMan+, > device ID 0 > Apr 29 19:57:32 /kernel: vga0: at > port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Apr 29 19:57:32 /kernel: sc0: at > flags 0x100 on isa0 > Apr 29 19:57:32 /kernel: sc0: VGA <16 virtual > consoles, flags=0x300> > Apr 29 19:57:32 /kernel: sio0: configured irq 4 not > in bitmap of probed irqs 0 > Apr 29 19:57:32 /kernel: sio0 at port 0x3f8-0x3ff irq > 4 flags 0x10 on isa0 > Apr 29 19:57:32 /kernel: sio0: type 8250 > Apr 29 19:57:32 /kernel: sio1: configured irq 3 not > in bitmap of probed irqs 0 > Apr 29 19:57:32 /kernel: ppc0: at > port 0x378-0x37f irq 7 on isa0 > Apr 29 19:57:32 /kernel: ppc0: Generic chipset > (NIBBLE-only) in COMPATIBLE mode > Apr 29 19:57:32 /kernel: plip0: interface> on ppbus0 > Apr 29 19:57:32 /kernel: lpt0: on ppbus0 > Apr 29 19:57:32 /kernel: lpt0: Interrupt-driven port > Apr 29 19:57:32 /kernel: ppi0: on > ppbus0 > Apr 29 19:57:32 /kernel: ad0: 3052MB SV0322A> [11024/9/63] at ata0-master WDMA2 > Apr 29 19:57:32 /kernel: acd0: CDROM at > ata0-slave using PIO3 > Apr 29 19:57:32 /kernel: Mounting root from > ufs:/dev/ad0s1a > Apr 29 19:58:29 login: ROOT LOGIN (root) ON ttyv0 > Apr 29 20:25:45 /kernel: cd9660: RockRidge Extension > Apr 29 21:28:02 /kernel: fd0c: hard error reading > fsbn 0 of 0-3 (No status) > Apr 29 21:39:30 /kernel: fd0c: hard error writing > fsbn 7 of 7-9 (No status) > Apr 29 21:39:32 /kernel: fd0c: hard error writing > fsbn 16 of 16-18 (No status) > Apr 29 21:39:34 /kernel: fd0c: hard error writing > fsbn 19 (No status) > Apr 29 21:39:37 /kernel: fd0c: hard error writing > fsbn 2127 (No status) > Apr 29 21:39:44 last message repeated 2 times > > > ------------- > kernel configuration file > ------------- > # > # YHVH -- Customized kernel configuration file for > this FreeBSD/i386 system > # > # For more information on this file, please read the > handbook section on > # Kernel Configuration Files: > # > # > http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in > /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise > always see the > # FreeBSD World Wide Web server > (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed > explanations of the > # device lines is also present in the ./LINT > configuration file. If you are > # in doubt as to the purpose or necessity of a line, > check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/YHVH,v 1.0 2001/04/29 > 23:16:07 n_hibma Exp $ > > machine i386 > cpu I586_CPU > > ident YHVH > maxusers 32 > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug > symbols > > options GPL_MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep > this!] > options SOFTUPDATES #Enable FFS soft updates support > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > #options NFS #Network Filesystem > #options NFS_ROOT #NFS usable as root device, NFS > required > #options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 > required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP > THIS!] > #options SCSI_DELAY=15000 #Delay (in ms) before > probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time > extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in > /dev > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > #device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > #device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI > devices > > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard AIC7xxx devices > #device amd # AMD 53C974 (Teckram DC-390(T)) > #device isp # Qlogic family > #device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic (newer chipsets) > #options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices when > # both sym and ncr are configured > > #device adv0 at isa? > #device adw > #device bt0 at isa? > #device aha0 at isa? > #device aic0 at isa? > > #device ncv # NCR 53C500 > #device nsp # Workbit Ninja SCSI-3 > #device stg # TMC 18C30/18C50 > > # SCSI peripherals > #device scbus # SCSI bus (required) > #device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > #device cd # CD > #device pass # Passthrough device (direct SCSI > access) > > # RAID controllers interfaced to the SCSI subsystem > #device asr # DPT SmartRAID V, VI and Adaptec SCSI > RAID > #device dpt # DPT Smartcache - See LINT for options! > #device mly # Mylex AcceleRAID/eXtremeRAID > > # RAID controllers > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 > mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an > SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 > compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt > console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with > the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # > Advanced Power Management > > # PCCARD (PCMCIA) support > device card > device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 > disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs. > #device de # DEC/Intel DC21x4x (``Tulip'') > #device fxp # Intel EtherExpress PRO/100B (82557, > 82558) > #device tx # SMC 9432TX (83c170 ``EPIC'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') > #device wx # Intel Gigabit Ethernet Card > (``Wiseman'') > > # PCI Ethernet NICs that use the common MII bus > controller code. > # NOTE: Be sure to keep the 'device miibus' line in > order to use these NICs! > device miibus # MII bus support > #device dc # DEC/Intel 21143 and various workalikes > #device pcn # AMD Am79C79x PCI 10/100 NICs > device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sis # Silicon Integrated Systems SiS 900/SiS > 7016 > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device tl # Texas Instruments ThunderLAN > device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > #device ex > #device ep > #device fe0 at isa? port 0x300 > # WaveLAN/IEEE 802.11 wireless NICs. Note: the > WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA > attatement needed > # and resources will always be dynamically assigned by > the pccard code. > #device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the > declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards > set to ISA PnP > # mode (the factory default). If you set the switches > on your ISA > # card for a manually chosen I/O address and IRQ, you > must specify > # those paremeters here. > #device an > # Xircom Ethernet > #device xe > # The probe order of these is presently determined by > i386/isa/isa_compat.c. > device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > device lnc0 at isa? port 0x280 irq 10 drq 0 > device cs0 at isa? port 0x300 > device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units > to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif 4 # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying > (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet > Filter. > # Be aware of the administrative consequences of > enabling this! > pseudo-device bpf #Berkeley packet filter > > # USB support > #device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > #device usb # USB Bus (required) > #device ugen # Generic > #device uhid # "Human Interface Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus > and da > #device ums # Mouse > #device uscanner # Scanners > # USB Ethernet, requires mii > #device aue # ADMtek USB ethernet > #device cue # CATC USB ethernet > #device kue # Kawasaki LSI USB ethernet > > Keith Proffitt > keith_proffitt@yahoo.com > > > > > > > > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Auctions - buy the things you want at great prices > http://auctions.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-newbies" in the body of the message -- Joe Warner Daemon News Bringing BSD Together Daemon News E-Zine http://www.daemonnews.org Daily Daemon News http://daily.daemonnews.org/ Print Magazine http://magazine.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-newbies" in the body of the message