Date: Thu, 15 Mar 2007 22:08:49 -0700 From: Garrett Cooper <youshi10@u.washington.edu> To: freebsd-questions@freebsd.org Subject: Re: CD burning problem Message-ID: <45FA2661.7000606@u.washington.edu> In-Reply-To: <200703152155.21957.bulk_mail@siegel-tech.net> References: <200703152155.21957.bulk_mail@siegel-tech.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Aaron Siegel wrote: > Hello > > I am unable to burn cd with my new Sony DVD-RW. I have been fighting with this > for month. Sorry for have to post this message for such a basic task, Bellow > is the error message that is produced by cdrecord > > Thank you > Aaron > > <root@ballboy># cdrecord -scanbus > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg > Schilling > Using libscg version 'schily-0.8'. > scsibus1: > 1,0,0 100) 'SONY ' 'DVD RW DRU-820A ' '1.0b' Removable CD-ROM > 1,1,0 101) * > 1,2,0 102) * > 1,3,0 103) * > 1,4,0 104) * > 1,5,0 105) * > 1,6,0 106) * > 1,7,0 107) * > > <root@ballboy># cdrecord dev=1,0,0 k3b_image.iso > cdrecord: No write mode specified. > cdrecord: Asuming -tao mode. > cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > cdrecord: Continuing in 5 seconds... > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg > Schilling > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Using libscg version 'schily-0.8'. > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'SONY ' > Identifikation : 'DVD RW DRU-820A ' > Revision : '1.0b' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. > cdrecord: If you need DVD-R/DVD-RW support, ask the Author for > cdrecord-ProDVD. > cdrecord: Free test versions and free keys for personal use are at > ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > Starting to write CD/DVD at speed 40 in real TAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Turning BURN-Free off > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 01 55 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 04 00 00 00 00 0A 4F 85 00 00 08 03 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0x4 Hardware Error, Segment 0 > Sense Code: 0x08 Qual 0x03 (logical unit communication crc error > (ultra-dma/32)) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 18.206s timeout 40s > write track data: error after 698368 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > cdrecord: Input/output error. close track/session: scsi sendcmd: retryable > error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 480s > cmd finished after 0.000s timeout 480s > cdrecord: Cannot fixate disk. Cheap media? How much data are you trying to burn? -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45FA2661.7000606>