Date: Sun, 13 Oct 2019 19:19:04 -0500 From: Mike Karels <mike@karels.net> To: Ian Lepore <ian@freebsd.org> Cc: Glen Barber <gjb@freebsd.org>, freebsd-arm@freebsd.org Subject: Re: FreeBSD 12.1-BETA3 won't boot on Beaglebone Black Message-ID: <201910140019.x9E0J4P3077569@mail.karels.net> In-Reply-To: Your message of Sun, 13 Oct 2019 11:05:04 -0600. <21ca35fea0b47be32022baef29ea67208179f0f3.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Sun, 2019-10-13 at 08:10 -0500, Mike Karels wrote: > > Top-posting to avoid the search: has anyone looked at this? Any > > thoughts > > on where the problem might lie? Any chance of getting it fixed for > > 12.1? > > > > I could do something like a driver bisection, but a full bisection > > might > > be a bit much on this platform. > > > > Thanks, > > Mike > > > I was under the impression this was a known problem with a known fix, > and we were just waiting for the u-boot port changes to find their way > into the release images. > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238344 > -- Ian Thanks, Ian, I hadn't seen that bug. Mike > > To: Ian Lepore <ian@freebsd.org> > > cc: Glen Barber <gjb@freebsd.org>, > > Emmanuel Vadot <manu@bidouilliste.com>, freebsd-arm@freebsd.org > > From: Mike Karels <mike@karels.net> > > Subject: Re: FreeBSD 12.1-BETA3 won't boot on Beaglebone Black > > Date: Tue, 08 Oct 2019 19:18:25 -0500 > > I trimmed most of the context, the quoting was getting rather deep. > > Responding to multiple messages... > > > > > > I re-tested 12.1-BETA3 on my BeagleBone Black, and do not > > > > > > see any > > > > > > boot > > > > > > failures. This is with a class 10 SD card. > > > > > > > > > > > > Glen > > > > > > > > > > > > > > > > Even when using the button to force booting from sdcard ? > > > > > > > > > > > > > Huh. Yeah, I do see 'sdhci_ti1-slot0: Controller timeout' when > > > > using > > > > the button. > > > > > > > > Glen > > > > > > > BTW, those controller timeouts are non-fatal. If you let it keep > > > trying, eventually the board finishes booting (it takes over 2 > > > minutes). But you can't access the emmc. If you want a > > > workaround for > > > faster booting until the problem is fixed, add > > > dev.sdhci_ti.1.timeout=1 > > > to /boot/loader.conf. > > > -- Ian > > - I have tried multiple SD cards, and they boot other releases; as > > noted, > > they are not the problem. > > - I hadn't waited long enough / for enough repeats of the > > timeout. Looks > > like it takes 16 failures, but it does in fact boot. It then > > prints > > mmc1: No compatible cards found on bus > > and there is no mmcsd1 in /dev. > > - Setting the timeout to 1 makes booting tolerable. I'll keep > > BETA3 > > running now. > > Thanks, > > Mike > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org > "
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201910140019.x9E0J4P3077569>