Date: Mon, 11 Oct 2010 19:17:09 +0200 From: dan p <glimp@live.com> To: <kline@thought.org>, <freebsd-questions@freebsd.org> Subject: RE: mouse problems.... Message-ID: <SNT136-w25027282EBBA04ECE95BC6DC530@phx.gbl> In-Reply-To: <20101011164152.GA4652@thought.org> References: <20101011032642.GA3354@thought.org>, <20101011164152.GA4652@thought.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Date: Mon=2C 11 Oct 2010 09:41:52 -0700 > From: kline@thought.org > To: freebsd-questions@freebsd.org > Subject: Re: mouse problems.... >=20 > On Sun=2C Oct 10=2C 2010 at 08:26:45PM -0700=2C Gary Kline wrote: > > I'm lost. Aday ago when I rebooted my old Dell=2C the mouse wouldn't > > work. A hour ago I got X booting on my server=2C but the same thing: > > no mouse. I see the cursor=2C but it is frozen. The only place my > > mouse works is on my linux system. The KVM connections seem soild=3B > > the only problem is the mouse. The brand is "Logitech" but it is > > a PS/2 mouse. > >=20 > >=20 > > I have tried the sysinstall utility=3B nothing. Would completely > > rebuilding the kernels and worlds do any good? Any other ideas? > >=20 >=20 >=20 > Here is more from dmesg on my server. startx brings up three > twm xterms and a tiny xclock in the upper right corner=2C but the > mouse cursor is frozen. The KVM unit is a Belkin SOHO=2C if that > means anything. The KVM box is balanced on the edge of a small > platic table=3B my 20" widescreen display is jury-rigged behind > and balanced on surplus plastic. I can't do much of anything > because I can't tell where the mouse is plugged i to the KVM > unit. =20 >=20 > I'm including the dmesg output from the server. Is there a > mouse driver I can compile that will get the mouse working on my > two FreeBSD platforms? [Right now=2C things only work on my > Ubuntu desktop. ... ] >=20 > thanks for any help. >=20 > gary >=20 > Enc: dmesg fron ethic >=20 >=20 >=20 > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979=2C 1980=2C 1983=2C 1986=2C 1988=2C 1989=2C 1991=2C 199= 2=2C 1993=2C 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-RELEASE-p4 #2: Sat Nov 21 05:52:04 PST 2009 > root@ethic.thought.org:/usr/obj/usr/src/sys/ETHIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (2793.01-MHz 686-cla= ss CPU) > Origin =3D "GenuineIntel" Id =3D 0x1067a Stepping =3D 10 > Features=3D0xbfebfbff<FPU=2CVME=2CDE=2CPSE=2CTSC=2CMSR=2CPAE=2CMCE=2CCX= 8=2CAPIC=2CSEP=2CMTRR=2CPGE=2CMCA=2CCMOV=2CPAT=2CPSE36=2CCLFLUSH=2CDTS=2CAC= PI=2CMMX=2CFXSR=2CSSE=2CSSE2=2CSS=2CHTT=2CTM=2CPBE> > Features2=3D0x408e39d<SSE3=2CDTES64=2CMON=2CDS_CPL=2CEST=2CTM2=2CSSSE3= =2CCX16=2CxTPR=2CPDCM=2CSSE4.1=2CXSAVE> > AMD Features=3D0x20100000<NX=2CLM> > AMD Features2=3D0x1<LAHF> > Cores per package: 2 > real memory =3D 3478716416 (3317 MB) > avail memory =3D 3399180288 (3241 MB) > ACPI APIC Table: <DELL FX09 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 4 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <DELL FX09 > on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0=2C a0000 (3) failed > acpi0: reservation of 100000=2C cf490000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a= cpi0 > device_attach: acpi_hpet0 attach returned 12 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf= 7ffff=2C0xd0000000-0xdfffffff=2C0xfdb00000-0xfdbfffff irq 16 at device 2.0 = on pci0 > agp0: <Intel G33 SVGA controller> on vgapci0 > agp0: detected 7164k stolen memory > agp0: aperture size is 256M > em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xfe00-0xfe1f mem = 0xfdfc0000-0xfdfdffff=2C0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:24:e8:17:88:61 > uhci0: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 16 at devic= e 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb0 > uhub0: 2 ports with 2 removable=2C self powered > uhci1: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 21 at devic= e 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb1 > uhub1: 2 ports with 2 removable=2C self powered > uhci2: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at devic= e 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb2 > uhub2: 2 ports with 2 removable=2C self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq = 18 at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers=2C 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub=2C class 9/0=2C rev 2.00/1.00=2C addr 1> on u= sb3 > uhub3: 6 ports with 6 removable=2C self powered > uhub4: <vendor 0x05e3 USB2.0 Hub=2C class 9/0=2C rev 2.00/77.60=2C addr 2= > on uhub3 > uhub4: single transaction translator > uhub4: 4 ports with 4 removable=2C self powered > ukbd0: <No brand Combo Free KVM=2C class 0/0=2C rev 1.10/0.00=2C addr 3> = on uhub4 > kbd2 at ukbd0 > uhid0: <No brand Combo Free KVM=2C class 0/0=2C rev 1.10/0.00=2C addr 3> = on uhub4 > pci0: <multimedia=2C HDA> at device 27.0 (no driver attached) > uhci3: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 23 at devic= e 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub5: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb4 > uhub5: 2 ports with 2 removable=2C self powered > uhci4: <UHCI (generic) USB controller> port 0xf900-0xf91f irq 19 at devic= e 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub6: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb5 > uhub6: 2 ports with 2 removable=2C self powered > uhci5: <UHCI (generic) USB controller> port 0xf800-0xf81f irq 18 at devic= e 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub7: <Intel UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C addr 1> on u= sb6 > uhub7: 2 ports with 2 removable=2C self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq = 23 at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers=2C 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub8: <Intel EHCI root hub=2C class 9/0=2C rev 2.00/1.00=2C addr 1> on u= sb7 > uhub8: 6 ports with 6 removable=2C self powered > umass0: <TEAC CA-200=2C class 0/0=2C rev 2.00/4.08=2C addr 2> on uhub8 > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port= 0xde00-0xdeff mem 0xfddff000-0xfddff0ff irq 16 at device 1.0 on pci2 > re0: Chip rev. 0x00800000 > re0: MAC rev. 0x00000000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > rgephy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000bas= eT=2C 1000baseT-FDX=2C auto > re0: Ethernet address: 00:08:54:d8:4a:99 > re0: [FILTER] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH9 SATA300 controller> port 0xf700-0xf707=2C0xf600-0xf6= 03=2C0xf500-0xf507=2C0xf400-0xf403=2C0xf300-0xf30f=2C0xf200-0xf20f irq 19 a= t device 31.2 on pci0 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > pci0: <serial bus=2C SMBus> at device 31.3 (no driver attached) > atapci1: <Intel ICH9 SATA300 controller> port 0xf000-0xf007=2C0xef00-0xef= 03=2C0xee00-0xee07=2C0xed00-0xed03=2C0xec00-0xec0f=2C0xeb00-0xeb0f irq 19 a= t device 31.5 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > acpi_tz0: <Thermal Zone> on acpi0 > speaker0: <PC speaker> port 0x61 on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5=2C0x3f7 irq 6 drq 2 on a= cpi0 > fdc0: [FILTER] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep=2C but is not recognized. > est: cpu_vendor GenuineIntel=2C msr 6164a2306004a23 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep=2C but is not recognized. > est: cpu_vendor GenuineIntel=2C msr 6164a2306004a23 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a= cpi0 > device_attach: acpi_hpet0 attach returned 12 > pmtimer0 on isa0 > ata0 at port 0x1f0-0x1f7=2C0x3f6 irq 14 on isa0 > ata0: [ITHREAD] > ata1 at port 0x170-0x177=2C0x376 irq 15 on isa0 > ata1: [ITHREAD] > atkbdc0: <Keyboard controller (i8042)> at port 0x60=2C0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles=2C flags=3D0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA5BA> at ata2-master SATA300 > GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3. > GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67. > GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20. > acd0: DVDR <Optiarc DVD+/-RW AD-7200S/102A> at ata3-master SATA150 > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40= 0x00 0x01 > (probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 > (probe0:ata3:0:0:0): CAM Status: SCSI Status Error > (probe0:ata3:0:0:0): SCSI Status: Check Condition > (probe0:ata3:0:0:0): NOT READY asc:3a=2C1 > (probe0:ata3:0:0:0): Medium not present - tray closed > (probe0:ata3:0:0:0): Unretryable error > (probe1:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 > (probe1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe1:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe1:umass-sim0:0:0:0): NOT READY asc:3a=2C0 > (probe1:umass-sim0:0:0:0): Medium not present > (probe1:umass-sim0:0:0:0): Unretryable error > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40= 0x00 0x01 > (probe1:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0=20 > (probe1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (probe1:umass-sim0:0:0:1): SCSI Status: Check Condition > (probe1:umass-sim0:0:0:1): NOT READY asc:3a=2C0 > (probe1:umass-sim0:0:0:1): Medium not present > (probe1:umass-sim0:0:0:1): Unretryable error > (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0=20 > (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:2): NOT READY asc:3a=2C0 > (probe0:umass-sim0:0:0:2): Medium not present > (probe0:umass-sim0:0:0:2): Unretryable error > (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0=20 > (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:3): NOT READY asc:3a=2C0 > (probe0:umass-sim0:0:0:3): Medium not present > (probe0:umass-sim0:0:0:3): Unretryable error > SMP: AP CPU #1 Launched! > cd0 at ata3 bus 0 target 0 lun 0 > cd0: <Optiarc DVD+-RW AD-7200S 102A> Removable CD-ROM SCSI-0 device=20 > cd0: 3.300MB/s transfers > cd0: Attempt to query device size failed: NOT READY=2C Medium not present= - tray closed > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <TEAC USB HS-CF Card 4.08> Removable Direct Access SCSI-0 device=20 > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY=2C Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <TEAC USB HS-xD/SM 4.08> Removable Direct Access SCSI-0 device=20 > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: NOT READY=2C Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <TEAC USB HS-MS Card 4.08> Removable Direct Access SCSI-0 device=20 > da2: 40.000MB/s transfers > da2: Attempt to query device size failed: NOT READY=2C Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <TEAC USB HS-SD Card 4.08> Removable Direct Access SCSI-0 device=20 > da3: 40.000MB/s transfers > da3: Attempt to query device size failed: NOT READY=2C Medium not present > Trying to mount root from ufs:/dev/ad4s1a > GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed. > GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3. > GEOM_LABEL: Label ufsid/4b047bd775058e20 removed. > GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20. > GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed. > GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67. > GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed. > GEOM_LABEL: Label ufsid/4b047bd775058e20 removed. > GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed. > drm0: <Intel G33> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] AGP at 0xd0000000 256MB > info: [drm] Initialized i915 1.6.0 20080730 > drm0: [ITHREAD] >=20 What kind of mouse are you using ? USB ? If so=2C I don't see any driver=20 attached. Also=2C It does not seem HAL and DBUS services have been started and are ru= nning: in some configurations they are required for mouse to work d =
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?SNT136-w25027282EBBA04ECE95BC6DC530>