Date: Thu, 13 Jan 2005 11:33:49 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: Rick Updegrove <dislists@updegrove.net> Cc: freebsd-stable@freebsd.org Subject: Re: 5.3-RELEASE crashes during make buildworld (and other problems) Message-ID: <41E5A5CD.60208@paradise.net.nz> In-Reply-To: <41E58F82.2060309@updegrove.net> References: <41E36760.2090609@updegrove.net> <41E380F4.40200@paradise.net.nz> <41E58F82.2060309@updegrove.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Rick Updegrove wrote: > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND > 607 root 131 0 136K 36K RUN 51:14 98.97% 98.97% burnK7 > > *"end paste from top process" > > As you can see it went on for 51 minutes and my machine did not lock up > and the heat alarm did not go off. Please note that I ran KDE and > portupgrade during this test with no problems at all. Also note there is a > 160 GIG drive in here that was undergoing a fsck -B which really slows > down the system a lot. > > Thanks again for the reply, but I do not suspect hardware per se. The > reason I believe this is as I mentioned this machine runs FreeBSD > 4.11-STABLE and/or Win2K (all service packs) just fine. On windoze I > just beat half-life 2 without ever crashing it. > > 98.87% for 51 minutes *should* have triggered any heat problems, so looks like the HW is not the problem (worth ruling out anyway). best wishes Mark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41E5A5CD.60208>