Date: Wed, 2 Dec 2015 23:45:30 +0000 From: Steven Hartland <killing@multiplay.co.uk> To: "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: Intel X710 NVM - Update not available Message-ID: <565F829A.5080406@multiplay.co.uk>
next in thread | raw e-mail | index | archive | help
When starting on both FreeBSD and Linux the latest driver complains that
the NVM should be updated.
As there's no FreeBSD NVM update utility available I got the machine
temporarily booted into Linux however the updater reports:
"Update not available"
I've attached the log from an inventory run which I believe identifies
the card as a dual port X710:
[02:00:00]: Intel(R) Ethernet Converged Network Adapter X710
LAN MAC: 3CFDFE007460
Alt MAC: 000000000000
SAN MAC: 3CFDFE007461
EEPROM: ETrackId: 80001867, Checksum valid
VPD: Size: 152
Flash: Size: 8388608, CIVD: 16.5.10
Vendor: 8086 Device: 1572 Subvendor: 8086 Subdevice: 6 Revision: 1
Type: PXE, Version: 1.0.10, Checksum: Not Relevant
Type: ISCSI, Version: 3.0.44, Checksum: Not Relevant
Type: ISCSI_SETUP, Version: 3.0.44, Checksum: Not Relevant
Type: EFI_X64, Version: 1.1.33, Checksum: None
Type: CLP_LOADER, Version: 3.0.30, Checksum: Valid
Type: IMAGE_SHARED_40G, Version: 1.0.7, Checksum: Not Relevant
Looking in nvmupdate.cfg the device matches the XL710 but there's no
match for EEPID which I believe corrisponds to the EEPROM: EtrackID of
80001867.
So the question is where do I get the right NVM update from?
./nvmupdate64e -l update.log
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.25.20.12
Copyright (C) 2013 - 2015 Intel Corporation.
WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR POWER
OFF THE SYSTEM DURING THIS UPDATE
Inventory in progress. Please wait [*-........]
Num Description Device-Id B:D Adapter Status
=== ====================================== ========= =====
====================
01) Intel(R) Ethernet Converged Network Ad 8086-1572 02:00 Update not
available
02) Intel(R) 82574L Gigabit Network Connec 8086-10D3 03:00 Not supported
03) Intel(R) 82574L Gigabit Network Connec 8086-10D3 04:00 Not supported
Tool execution completed with the following status: All operations
completed successfully
Press any key to exit.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?565F829A.5080406>