From owner-freebsd-mobile Sun Jan 7 21:21:55 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.village.org [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 11EB137B400 for ; Sun, 7 Jan 2001 21:21:38 -0800 (PST) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.1/8.11.1) with ESMTP id f085LNs41440; Sun, 7 Jan 2001 22:21:23 -0700 (MST) (envelope-from imp@harmony.village.org) Message-Id: <200101080521.f085LNs41440@harmony.village.org> To: "Justin T. Gibbs" Subject: Re: NEWCARD update Cc: Peter Wemm , Jonathan Chen , freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Sun, 07 Jan 2001 07:32:53 MST." <200101071432.f07EWrs59767@aslan.scsiguy.com> References: <200101071432.f07EWrs59767@aslan.scsiguy.com> Date: Sun, 07 Jan 2001 22:21:23 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200101071432.f07EWrs59767@aslan.scsiguy.com> "Justin T. Gibbs" writes: : >Note all the devices are on IRQ9, including the ACPI embedded controller, : >and the cardbus/pccard slots and the ed0 driver. : : I don't understand why the second cardbus function of both of our laptops : share the an irq with function 0. That shouldn't have to be the case. : The IRQ will be shared between the bridge's isr and the cards though. It likely has to do with the fact that laptop mobo tend to be really cheap and it is easier to run one wire than two to the chip for the pci functions. I haven't looked at the code, but there are settings for the chip such that interrupts for function 0 go to INTA and those for function 1 go to INTB. However, if the mother board has these two wire or'd together it wouldn't matter... Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message