Date: Sat, 20 Mar 2004 15:43:39 +0200 From: "GiTi" <qaz@airland.kiev.ua> To: "Olaf Hoyer" <ohoyer@ohoyer.de> Cc: freebsd-questions@freebsd.org Subject: Re: problem with MySon Ethernet Nics Message-ID: <200403201343.i2KDheJD025344@sv2.airland.kiev.ua>
next in thread | raw e-mail | index | archive | help
> > yes, my Nic has own driver but ... only for Freebsd 2.x and 3.x. And this is > > its instruction > > Ok, so there are sources, but the driver structure from 4.x and 5.x > differs a lot from 3.x, so they cannot work. > > > pcib2: at device 30.0 on pci0 > > pci3: on pcib2 > > pci3: at device 4.0 (no driver attached) > > ok, these were the lines that were important. > > > > > when i run command pciconf, i also met such error: > > Operation is not permitted > > Probably you weren't root, pciconf -lv needs root riviliges. > > > With a 4.9-stable, it looks like this: > > pris 14:03 >pciconf -lv > pciconf: /dev/pci: Permission denied > pris 14:03 >su - > Password: > pris# pciconf -lv > > pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' > class = bridge > subclass = PCI-PCI > > > In the case above, the entries of: > pcib2 and pci3 are important, could you post them? > > Also please post a uname -a string of your system. Olaf Hoyer, thank you again i knows Nic's driver is for 2.x and 3.x, i have compiled its driver because i can not probe it i was root when using pciconf. I was confused and ... And I have just reinstall my freebsd 5.2, now i can run pciconf And this is the result: -------begin----------- agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x11 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x56611462 chip=0x24c28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) USB UHCI Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x56611462 chip=0x24c48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) USB UHCI Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x56611462 chip=0x24c78086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) USB UHCI Controller #3' class = serial bus subclass = USB none0@pci0:29:7: class=0x0c0320 card=0x39801462 chip=0x24cd8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) USB EHCI Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB (ICH4) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x56611462 chip=0x24cb8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB (ICH4) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none1@pci0:31:3: class=0x0c0500 card=0x56611462 chip=0x24c38086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) SMBus Controller' class = serial bus subclass = SMBus none2@pci0:31:5: class=0x040100 card=0x56611462 chip=0x24c58086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBM (ICH4/M) AC'97 Audio Controller' class = multimedia subclass = audio none3@pci1:0:0: class=0x030000 card=0x000510de chip=0x002810de rev=0x15 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'NV5 TNT2 / TNT2 Pro' class = display subclass = VGA none4@pci3:4:0: class=0x020000 card=0x132010bd chip=0x08031516 rev=0x00 hdr=0x00 vendor = 'Myson Technology Inc' device = '803 series PCI Ethernet controller' class = network subclass = ethernet ------------end----------- afterthat i run # ifconfig -a -----begin----------- plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 --------end------ I will post the uname -a string of system if needed but it looks like : FreeBSd 5.2 ... i386 ... GENERIC I have not rebuilt my kernel yet. any suggestions? Thanks in advanced ________________________________________________ www.airland.kiev.ua - Airland Network eMail
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403201343.i2KDheJD025344>