Date: Sat, 8 Dec 2001 20:24:38 +0100 From: Bernd Walter <ticso@cicely8.cicely.de> To: "David O'Brien" <obrien@FreeBSD.ORG> Cc: Christian Weisgerber <naddy@mips.inka.de>, freebsd-alpha@FreeBSD.ORG Subject: Re: strange.. Message-ID: <20011208202438.A6171@cicely8.cicely.de> In-Reply-To: <20011208102309.A11428@dragon.nuxi.com> References: <Pine.LNX.4.33.0112062010130.12213-100000@saruman.xwin.net> <20011207120403.B82602@dragon.nuxi.com> <9urhrr$10om$1@kemoauc.mips.inka.de> <20011208102309.A11428@dragon.nuxi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Dec 08, 2001 at 10:23:09AM -0800, David O'Brien wrote:
> On Fri, Dec 07, 2001 at 11:03:23PM +0000, Christian Weisgerber wrote:
> > David O'Brien <obrien@freebsd.org> wrote:
> >
> > > For a PC164 you want a Qlogic 1040 or 1020; or almost any NCR/Symbios/LSI
> > > controller.
> >
> > Careful. I'm under the impression that the PC164 SRM will not
> > recognize most modern LSI adapters. In fact, people may be limited
> > to old models that are no longer available new.
>
> I know for a fact that PC164 will work with "875" [UW] Symbios
> controllers. I am able to use "895" controllers (LSI and Tekram) in both
> PWS and 164LX. So I feel there is a chance they would work. But I
> wouldn't promise it until I've seen it myself.
I'm booting my PC164 from an 895:
ticso@cicely9# pciconf -lv
sym0@pci0:5:0: class=0x010000 card=0x00000000 chip=0x000c1000 rev=0x01 hdr=0x00
vendor = 'Symbios Logic (NCR) (LSI Logic)'
device = 'SYM53C895 Ultra-2 Wide SCSI'
class = mass storage
subclass = SCSI
Show config lists my two 810* controllers and show device lists the
devices of my 895 and my 810a.
But I always asumed that it's working because the 810ae isn't working
with my PC164 and confused SRM.
sym1@pci0:6:0: class=0x010000 card=0x10001000 chip=0x00011000 rev=0x23 hdr=0x00
vendor = 'Symbios Logic (NCR) (LSI Logic)'
device = '53C810 Fast/Narrow SCSI I/O Cntrlr'
class = mass storage
subclass = SCSI
sym2@pci0:7:0: class=0x010000 card=0x00000000 chip=0x00011000 rev=0x12 hdr=0x00
vendor = 'Symbios Logic (NCR) (LSI Logic)'
device = '53C810 Fast/Narrow SCSI I/O Cntrlr'
class = mass storage
subclass = SCSI
A shure winner is a 875 or 810(a) - not the newer 810ae which my sym1 is!
>>>show config
Digital AlphaPC 164 500 MHz
SRM Console: V5.5-1
PALcode: OpenVMS PALcode V1.21-9, Digital UNIX PALcode V1.23-8
SROM Revision: 2.2
Alpha 21164A-2
DECchip (tm) 21172 CIA ASIC Pass 3
MEMORY
256 Meg of system memory
PCI Bus
Bus 00 Slot 05: Vendor: 1000 Device: c
Bus 00 Slot 06: NCR 53C810 Scsi Controller
Bus 00 Slot 07: NCR 53C810 Scsi Controller
pka0.7.0.7.0 SCSI Bus ID 7
dka200.2.0.7.0 RZ55
dka300.3.0.7.0 CDC 94221-5
dka400.4.0.7.0 TOSHIBA CD-ROM XM-54
dka500.5.0.7.0 PINNACLE Vertex 2.6G
Bus 00 Slot 08: Intel 82378IB PCI to ISA Bridge
Bus 00 Slot 11: CMD PCI0646 IDE Controller
dqa.0.0.11.0
dqa0.0.0.11.0 Conner P eripherals
>>>show device
dka200.2.0.7.0 DKA200 RZ55 0900
dka300.3.0.7.0 DKA300 CDC 94221-5 5342
dka400.4.0.7.0 DKA400 TOSHIBA CD-ROM XM-5401TA 3115
dka500.5.0.7.0 DKA500 PINNACLE Vertex 2.6GB 2.21
dkb0.0.0.5.0 DKB0 FUJITSU M1606S-512 6406
dkb100.1.0.5.0 DKB100 CDC 94191-15 0344
dkb1000.10.0.5.0 DKB1000 SEAGATE ST318275LC 0001
dkb200.2.0.5.0 DKB200 IBM WDS-3100 !I S550
dkb400.4.0.5.0 DKB400 FUJITSU M2623S-512 0405
dkb900.9.0.5.0 DKB900 SEAGATE ST318275LC 0001
dqa0.0.0.11.0 DQA0 Conner P eripherals 1275M 0.28
dva0.0.0.0.1 DVA0
pka0.7.0.7.0 PKA0 SCSI Bus ID 7
pkb0.7.0.5.0 PKB0 SCSI Bus ID 7
--
B.Walter COSMO-Project http://www.cosmo-project.de
ticso@cicely.de Usergroup info@cosmo-project.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011208202438.A6171>