Date: Fri, 22 Aug 1997 11:01:05 -0700 (PDT) From: Simon Shapiro <Shimon@i-Connect.Net> To: FreeBSD-Current@freebsd.org Subject: Current Kernel Configuration Message-ID: <XFMail.970822110105.Shimon@i-Connect.Net>
next in thread | raw e-mail | index | archive | help
This message is in MIME format --_=XFMail.1.2-alpha.p0.FreeBSD:970822030152:362=_ Content-Type: text/plain; charset=iso-8859-8 Hi Y'all, Attached is a kernel config file which boots and runs just fine when compiled under recent 2.2. This very same config file compiles a 3.0 kernel very well, but at boot time, instead of handing things over to init, it just sits in default_halt(). Any clue is welcome. Simon --_=XFMail.1.2-alpha.p0.FreeBSD:970822030152:362=_ Content-Disposition: attachment; filename="DPT" Content-Transfer-Encoding: 7bit Content-Description: DPT Content-Type: text/plain; charset=us-ascii; name=DPT; SizeOnDisk=11101 # # SENDERO -- Sendero configuration # # $Id: DPT,v 1.21 1997/08/22 05:00:03 ShimonR Exp ShimonR $ machine "i386" cpu "I686_CPU" cpu "I586_CPU" ident SENDERO maxusers 64 options CHILD_MAX=128 options OPEN_MAX=128 options "MAXDSIZ=(64*1024*1024)" options "DFLDSIZ=(16*1024*1024)" config kernel root on wd0a # ... dumps on sd0s2b options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options USER_LDT #allow user-level control of i386 ldt options SYSVSHM options SYSVSEM options SYSVMSG options DDB options DDB_UNATTENDED options KTRACE #kernel tracing options PERFMON options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options USERCONFIG_BOOT #imply -c and parse info area #options VISUAL_USERCONFIG #visual boot -c editor options INET #InterNETworking pseudo-device ether pseudo-device fddi pseudo-device sppp pseudo-device loop pseudo-device ppp 4 pseudo-device bpfilter 16 pseudo-device disc pseudo-device tun 4 options MROUTING # Multicast routing options IPDIVERT #divert sockets options TCPDEBUG options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options DEVFS #devices filesystem options KERNFS #kernel interfaces filesystem #options NULLFS # Will not even compile options QUOTA #enable disk quotas options NULLFS_DIAGNOSTIC options KERNFS_DIAGNOSTIC options UMAPFS_DIAGNOSTIC options SAFETY controller pci0 device ch0 #SCSI media changers device sd0 #SCSI disks device st0 #SCSI tapes device cd0 #SCSI CD-ROMs device od0 #SCSI optical disk options SCSI_DELAY=5 # Don't be too pessimistic about SCSI device # Disk Addressing Guidelines: # We assume wide SCSI, not FCAL, with this release. # There is never a target 7, nor target 15; They are reserved for initiators! # Each ADAPTER takes 4 busses but uses only busses 0-2. # Each bus consumes 16 addresses, but uses no more than 13 devices per bus. # Devices with no LUNs have only LUN 0. Lun != 0 means secondary LUNS 1-7 # Non-zero LUNs have the same ID as LUN 0 but bit 7 is set on (64 + target) controller dpt0 controller dpt1 controller scbus0 at dpt0 bus 0 controller scbus1 at dpt0 bus 1 controller scbus2 at dpt0 bus 2 controller scbus4 at dpt1 bus 0 controller scbus5 at dpt1 bus 1 controller scbus6 at dpt1 bus 2 options DPT_USE_SINTR=1 # Use software interrupts (crucial) options DPT_MEASURE_PERFORMANCE # Lose ~0.1% performance but measure it options DPT_TRACK_CCB_STATES # Diagnostic value only. @ Simon's direction options DPT_HANDLE_TIMEOUTS # Leave on if things hang options DPT_COMMAND_SPLHIGH # Experimental, briefly locks eata ports options DPT_INTR_CHECK_SOFTC # Experimental; checks soft structs is valid # First DPT starts here device worm0 at scbus0 target 4 unit 0 tape st0 at scbus0 target 5 unit 0 device cd0 at scbus0 target 6 unit 0 disk sd0 at scbus0 target 0 unit 0 disk sd1 at scbus0 target 1 unit 0 disk sd2 at scbus0 target 2 unit 0 disk sd3 at scbus0 target 3 unit 0 disk sd4 at scbus0 target 4 unit 0 disk sd5 at scbus0 target 5 unit 0 disk sd6 at scbus0 target 6 unit 0 disk sd8 at scbus0 target 8 unit 0 disk sd9 at scbus0 target 9 unit 0 disk sd10 at scbus0 target 10 unit 0 disk sd11 at scbus0 target 11 unit 0 disk sd12 at scbus0 target 12 unit 0 disk sd13 at scbus0 target 13 unit 0 disk sd14 at scbus0 target 14 unit 0 device worm1 at scbus1 target 4 unit 0 tape st1 at scbus1 target 5 unit 0 device cd1 at scbus1 target 6 unit 0 disk sd16 at scbus1 target 0 unit 0 disk sd17 at scbus1 target 1 unit 0 disk sd18 at scbus1 target 2 unit 0 disk sd19 at scbus1 target 3 unit 0 disk sd20 at scbus1 target 4 unit 0 disk sd21 at scbus1 target 5 unit 0 disk sd22 at scbus1 target 6 unit 0 disk sd24 at scbus1 target 8 unit 0 disk sd25 at scbus1 target 9 unit 0 disk sd26 at scbus1 target 10 unit 0 disk sd27 at scbus1 target 11 unit 0 disk sd28 at scbus1 target 12 unit 0 disk sd29 at scbus1 target 13 unit 0 disk sd30 at scbus1 target 14 unit 0 device worm2 at scbus2 target 4 unit 0 tape st2 at scbus2 target 5 unit 0 device cd2 at scbus2 target 6 unit 0 disk sd32 at scbus2 target 0 unit 0 disk sd33 at scbus2 target 1 unit 0 disk sd34 at scbus2 target 2 unit 0 disk sd35 at scbus2 target 3 unit 0 disk sd36 at scbus2 target 4 unit 0 disk sd37 at scbus2 target 5 unit 0 disk sd38 at scbus2 target 6 unit 0 disk sd41 at scbus2 target 9 unit 0 disk sd42 at scbus2 target 10 unit 0 disk sd43 at scbus2 target 11 unit 0 disk sd44 at scbus2 target 12 unit 0 disk sd45 at scbus2 target 13 unit 0 disk sd46 at scbus2 target 14 unit 0 # Second DPT starts here device worm3 at scbus4 target 4 unit 0 tape st3 at scbus4 target 5 unit 0 device cd3 at scbus4 target 6 unit 0 disk sd64 at scbus4 target 0 unit 0 disk sd65 at scbus4 target 1 unit 0 disk sd66 at scbus4 target 2 unit 0 disk sd67 at scbus4 target 3 unit 0 disk sd68 at scbus4 target 4 unit 0 disk sd69 at scbus4 target 5 unit 0 disk sd70 at scbus4 target 6 unit 0 disk sd72 at scbus4 target 8 unit 0 disk sd73 at scbus4 target 9 unit 0 disk sd74 at scbus4 target 10 unit 0 disk sd75 at scbus4 target 11 unit 0 disk sd76 at scbus4 target 12 unit 0 disk sd77 at scbus4 target 13 unit 0 disk sd78 at scbus4 target 14 unit 0 disk sd79 at scbus4 target 15 unit 0 device worm4 at scbus5 target 4 unit 0 tape st4 at scbus5 target 5 unit 0 device cd4 at scbus5 target 6 unit 0 disk sd80 at scbus5 target 0 unit 0 disk sd81 at scbus5 target 1 unit 0 disk sd82 at scbus5 target 2 unit 0 disk sd83 at scbus5 target 3 unit 0 disk sd84 at scbus5 target 4 unit 0 disk sd85 at scbus5 target 5 unit 0 disk sd86 at scbus5 target 6 unit 0 disk sd88 at scbus5 target 8 unit 0 disk sd89 at scbus5 target 9 unit 0 disk sd90 at scbus5 target 10 unit 0 disk sd91 at scbus5 target 11 unit 0 disk sd92 at scbus5 target 12 unit 0 disk sd93 at scbus5 target 13 unit 0 disk sd94 at scbus5 target 14 unit 0 disk sd95 at scbus5 target 15 unit 0 device worm5 at scbus6 target 4 unit 0 tape st5 at scbus6 target 5 unit 0 device cd5 at scbus6 target 6 unit 0 disk sd96 at scbus6 target 0 unit 0 disk sd97 at scbus6 target 1 unit 0 disk sd98 at scbus6 target 2 unit 0 disk sd99 at scbus6 target 3 unit 0 disk sd100 at scbus6 target 4 unit 0 disk sd101 at scbus6 target 5 unit 0 disk sd102 at scbus6 target 6 unit 0 disk sd104 at scbus6 target 8 unit 0 disk sd105 at scbus6 target 9 unit 0 disk sd106 at scbus6 target 10 unit 0 disk sd107 at scbus6 target 11 unit 0 disk sd108 at scbus6 target 12 unit 0 disk sd109 at scbus6 target 13 unit 0 disk sd110 at scbus6 target 14 unit 0 disk sd111 at scbus6 target 15 unit 0 controller ahc0 options AHC_TAGENABLE options AHC_SCBPAGING_ENABLE options AHC_ALLOW_MEMIO controller scbus8 at ahc0 disk sd128 at scbus8 target 0 unit 0 disk sd129 at scbus8 target 1 unit 0 disk sd130 at scbus8 target 2 unit 0 disk sd131 at scbus8 target 3 unit 0 disk sd132 at scbus8 target 4 unit 0 disk sd133 at scbus8 target 5 unit 0 disk sd134 at scbus8 target 6 unit 0 disk sd136 at scbus8 target 8 unit 0 disk sd137 at scbus8 target 9 unit 0 disk sd138 at scbus8 target 10 unit 0 disk sd139 at scbus8 target 11 unit 0 disk sd140 at scbus8 target 12 unit 0 disk sd141 at scbus8 target 13 unit 0 disk sd142 at scbus8 target 14 unit 0 disk sd143 at scbus8 target 15 unit 0 pseudo-device pty 128 pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device log pseudo-device gzip # Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 64 #Concatenated disk driver options FAILSAFE #Be conservative controller isa0 options "AUTO_EOI_1" options "AUTO_EOI_2" options BOUNCE_BUFFERS #include support for DMA bounce buffers options "MAXMEM=(128*1024)" # 128M, no autodetect over 64M :-( #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=12 # number of virtual consoles device npx0 at isa? port "IO_NPX" irq 13 vector npxintr controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device ed0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector edintr controller snd0 device sb0 at isa? port 0x220 irq 7 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x300 device opl0 at isa? port 0x388 #device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK #options APM_IDLE_CPU # Tell APM to idle rather than halt'ing the cpu device de0 device fxp0 device fpa0 options COMPAT_LINUX options "EXT2FS" options "IBCS2" options SHOW_BUSYBUFS # List buffers that prevent root unmount --_=XFMail.1.2-alpha.p0.FreeBSD:970822030152:362=_-- End of MIME message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.970822110105.Shimon>