Date: Sat, 03 Mar 2001 15:07:57 +0400 From: Rino Mardo <rmardo@emirates.net.ae> To: freebsd-questions@FreeBSD.ORG Subject: laptop freezes if pccard removed Message-ID: <000a01c0a3d2$354492c0$2903010a@atg.altayer.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
hi. i upgraded from 4.1-Release to 4.2-Stable yesterday and i noticed that
whenever my psion goldcard 56k pccard isn't plugin my laptop freezes. even
if i manage to boot and login as root as soon as i remove the goldcard
everything freezes.
i've included my uname, kernel, and dmesg as attachments (i'm using outlook
express right now and trying hard not to tick console users :-).
please Cc me the replies as i'm not on the list.
[-- Attachment #2 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Fri Mar 2 13:37:31 GST 2001
root@hamm.atg.altayer.comTimecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (397.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134135808 (130992K bytes)
config> di sn0
config> di lnc0
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 127430656 (124444K bytes)
Preloaded elf kernel "kernel" at 0xc0322000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032209c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NeoMagic MagicMedia 256ZX SVGA controller> at 0.0 irq 11
chip1: <NeoMagic MagicMedia 256ZX Audio controller> mem 0xfda00000-0xfdafffff,0xf9800000-0xf9ffffff irq 5 at device 0.1 on pci1
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Hewlett Packard HP USB CD-Writer Plus, rev 1.00/0.01, addr 2
chip2: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.3 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xf3fffc00-0xf3fffc7f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:c0:4f:3d:74:76
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0
vpo0: EPP 1.9 mode
ad0: 9590MB <IBM-DCXA-210000> [19485/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master using PIO4
pccard: card inserted, slot 0
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
[-- Attachment #3 --]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.21 2001/01/12 23:45:14 scottl Exp $
machine i386
cpu I686_CPU
ident HAMM
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
#device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device pcn # AMD Am79C79x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device an
# Xircom Ethernet
device xe
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
#pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
[-- Attachment #4 --]
FreeBSD hamm.atg.altayer.com\000 4.2-STABLE FreeBSD 4.2-STABLE #0: Fri Mar 2 13:37:31 GST 2001 root@hamm.atg.altayer.com i386
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c0a3d2$354492c0$2903010a>