From owner-freebsd-scsi Thu Apr 25 06:19:37 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id GAA08565 for freebsd-scsi-outgoing; Thu, 25 Apr 1996 06:19:37 -0700 (PDT) Received: from uuneo.neosoft.com (root@uuneo.neosoft.com [206.109.1.3]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id GAA08559 for ; Thu, 25 Apr 1996 06:19:35 -0700 (PDT) Received: (from taronga@localhost) by uuneo.neosoft.com (8.7.5/8.7.4) with UUCP id HAA09603 for scsi@freebsd.org; Thu, 25 Apr 1996 07:32:25 -0500 (CDT) Received: (from peter@localhost) by bonkers.taronga.com (8.6.11/8.6.9) id HAA03629; Thu, 25 Apr 1996 07:22:25 -0500 Date: Thu, 25 Apr 1996 07:22:25 -0500 From: peter@taronga.com (Peter da Silva) Message-Id: <199604251222.HAA03629@bonkers.taronga.com> To: scsi@freebsd.org Subject: Re: Tape library or DLT support in FreeBSD/NetBSD In-Reply-To: Organization: none Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > What options do I have if I'm looking for hardware that will >allow me to backup 20 to 30 gigabytes of data unattended? First of all, with 30G of disk you're on easy street with about 1/4 of that total tape if you're using Amanda. So a single DLT10/20 (10 real/20 compressed) will work fine. You can get by with half that, so DAT 4/8 will do, barely, but you won't have much room for expansion and Amanda will bitch a lot about delayed saves. Go by the *uncompressed* size, since Amanda compresses/gzips and generally does better than the compression on the drive. We went with DLT at work, after looking into other options, and I'm glad we did. It's now up to 40/80 so there's plenty of room for growth. >On the other hand, DLT is more expensive (both drive >hardware and media) and isn't as mature as DDS-2 technology, but it is >much faster that DAT and you only have to worry about the software >seeing one giant device. I wouldn't say that DLT isn't mature. DEC's 1/2 inch cartridges date back to the '80s. The TZ87 is really a linear (heh) descendent of the old TK70.